TCL MR422S 4.5 CuFt Refrigerator User Manual
- October 30, 2023
- TCL
Table of Contents
- MR422S 4.5 CuFt Refrigerator
- Product Information: MR422S 4.5 CuFt Refrigerator
- TCL Protection Plan
- Safety Information
- Product Legend
- Product Usage Instructions
- Register and protect your purchase
- Door Reversal
- Installation
- Electrical Connection
- Daily Use
- Cleaning
- Troubleshooting
- TCL NORTH AMERICA LIMITED PRODUCT WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MR422S 4.5 CuFt Refrigerator
Product Information: MR422S 4.5 CuFt Refrigerator
The MR422S 4.5 CuFt Refrigerator is a compact refrigerator suitable for small spaces such as dorm rooms, offices, and apartments. The refrigerator has adjustable shelves, a crisper, and door shelves for storage. The appliance does not contain gasses that could damage the ozone layer in either its refrigerant circuit or insulation materials.
TCL Protection Plan
You can add a TCL Protection Plan when you register your product and be covered from life’s mishaps. Extended manufacturer coverage includes extended parts & labor coverage for manufacturer defects. The plan provides priority service, free shipping, and rapid turn-around time, product replacement, genuine TCL parts & factory certified service, and no deductible. Accidental damage protection coverage for drops, breaks, and spills starts after 30 days. You can add a TCL Protection Plan within your first 30 days of ownership to receive the best value and ensure nothing gets in the way of you enjoying your new product.
Safety Information
To reduce the risk of fire, electric shock, or personal injury, thoroughly read the manual and all instructions completely and carefully.
WARNING
- To avoid accidents or serious injury, all people using this appliance must be familiar with the contents of this User Manual, including Safety Information. The manufacturer is not responsible for damages or injury caused using this device outside of normal operations.
- This appliance is not recommended for use by children ages 8 years and under and persons with reduced physical, sensory, or mental capabilities unless supervised.
- This product is not a toy. Children shall not play with the or inside appliance. Small children and pets should be supervised when using the fridge.
- Cleaning and maintenance should be conducted by a suitable adult or child ages 8 and above under supervision.
- When discarding the appliance, make sure to unplug the appliance and wait a while before cutting the power cable (as close to the appliance as possible) and remove the door to prevent children from playing with the appliance and, subsequentially, reducing the risk of serious injury or death from electric shock or suffocation.
- If this appliance features a magnetic door seal and is to replace an older appliance with a spring lock (latch) on the door or lid, be sure to remove, disable, or make the spring lock unusable before discarding the appliance to prevent serious injury or death.
- CAUTION: Clearance between doors is small and fingers can be pinched. Be careful when opening and closing the doors, especially if children are in the area.
- WARNING: To avoid the danger of suffocation, keep plastic packaging away from pets, babies, and children. Do not use packaging bags in cribs, beds, carriages, or playpens.
- DANGER: Risk of child entrapment. Before you throw away an old refrigerator or freezer:
- Take off the doors
- Leave the shelves in place so that children may not easily climb inside.
- Do not puncture refrigerant tube
- R-600a is used as a refrigerant. This product contains flammable gas (Refrigerant R-600a)
- CAUTION: Risk of fire or explosion. Dispose of refrigerator and refrigerant in accordance with federal and local regulations.
- When disposing of a refrigerator, remove doors, door seals, and door latches to avoid entrapment of children and animals.
- In order to avoid the creation of a flammable gas-air mixture in the event that a leak in the refrigerating circuit occurs, the size of the room in which the appliance may be placed depends on the mass of the refrigerant loaded in the system. The room must be 35.3 ft3 in size for every 8 grams of R-600a refrigerant inside the appliance. Please refer to the rating label on the back of the refrigerator to determine the amount of R-600A refrigerant used in this product.
- The installation location should not be exposed to direct sunlight and not placed near any electrical appliance or heat source, e.g. stove, oven or hob, radiator, etc.
GENERAL SAFETY
- WARNING! Keep the appliance’s ventilation openings clear of obstruction.
- WARNING! Other than those recommended by the manufacturer in this manual, do not use any mechanical device or other means to accelerate the defrosting process.
- WARNING! Do not damage the refrigerant circuit.
- WARNING! Do not use other electrical appliances (such as ice cream makers) inside refrigerating appliances unless they are approved by the manufacturer.
- WARNING! If there is a lightbulb in your unit, do not touch it if it has been on for an extended period of time as it could be very hot and may result in serious injury.
- WARNING! When positioning the appliance, ensure the supply cord is not trapped or damaged.
- WARNING! Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
- WARNING! Do not use extension cords or ungrounded (two-prong) adapters.
- NEVER plug multiple appliances into the same outlet.
- Make sure that the power plug is not crushed or damaged by the back of the appliance.
- A crushed or damaged power plug may overheat and cause a fire, resulting in injury or death. Do not bend, twist, pull or place heavy objects on the power cord or supply.
- Do not store explosive substances, such as aerosol cans marked flammable, in this appliance.
- The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is flammable. Be sure to keep open flames, sources of ignition, and high heat sources away from the unit.
- Ensure that none of the refrigerant circuit components become damaged during transportation and installation.
- Make sure the room where the unit will be installed has thorough ventilation.
- It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short circuit, fire and/or electric shock.
- This appliance is intended to be used in household and similar applications such as:
- Staff kitchen areas in shops, offices, and other working environments
- Farmhouses and by clients in hotels, motels, and other residential-type environments
- Bed and breakfast type environments
- Catering and similar non-retail applications environments
- This appliance is designed for indoor use only.
- WARNING! Any electrical components (plug, power cord, compressor and etc.) must be replaced by a certified service agent or qualified service personnel. Contact our support team for help.
- WARNING! The light bulb supplied with this appliance is designed explicitly for this appliance and should not be used in any other device, lamp, or similar application outside of its intended use in this machine.
- The refrigerator must be plugged into its own dedicated 115 Volt, 60 Hz., 15 Amp, AC only electrical outlet. Do not lengthen or shorten the cord. The power cord of the appliance is equipped with a three-prong grounding plug for your protection against electrical shock hazards. It must be plugged directly into a properly grounded three prong receptacle. The receptacle must be installed in accordance with local codes and ordinances.
- Make sure you have quick access to the outlet the appliance is plugged into in case of an emergency where disconnection is quickly needed.
- Make sure the appliance is plugged into a wall main outlet and not into any power strip or similar device.
- Do not pull on the main power cable.
- If the power socket is loose, do not use it for the appliance under any circumstance as it may result in electric shock or fire.
- You must not operate the appliance without the lamp (if applicable to your unit).
- This appliance is heavy. Care should be taken when moving it. Team lift is recommended.
- Do not remove or touch items from the freezer compartment if your hands are damp/wet, as this could cause skin abrasions or frost/freezer burns.
- Avoid prolonged sunlight exposure to the appliance.
DAILY USE
- Do not put hot objects or devices on the plastic parts in the appliance.
- Do not place food products directly against the rear wall.
- Frozen food must not be re-frozen once it has been thawed out.
- Store pre-packed frozen food in accordance with the frozen food manufacturer’ s instructions (if your unit features a freezer or icebox).
- Strictly adhere to the appliance manufacturer’s storage recommendations. Refer to relevant instructions.
- Do not place carbonated or fizzy drinks in the freezer compartment as it creates pressure on the container, which may cause it to explode, resulting in damage to the appliance.
- Frozen snacks (e.g., popsicles) can cause frost burns if consumed straight from the appliance.
- To avoid contamination of food, please respect the following instructions:
- Don’t keep the door opening for a long time, it will cause a significant increase of the temperature in the compartments of the appliance.
- Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
- If the appliance is left empty for long periods, switch off, defrost, clean, dry and leave the door open to prevent mold developing within the appliance.
CARE AND CLEANING
- Before maintenance, switch off the appliance and disconnect the power plug from the main socket.
- Do not clean the appliance with metal objects.
- Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.
- Regularly examine the drain in the refrigerator for defrosted water.
- If necessary, clean the drain. If the drain is blocked, water will collect in the bottom of the appliance. (If applicable to your unit).
INSTALLATION
- IMPORTANT! For electrical connection, carefully follow the instructions given in the following points.
- The refrigerator must be disconnected from the source of electrical supply before attempting the installation.
- Only use accessories as indicated and not for any other use.
- Remove all protective plastic before using the appliance.
- Unpack the appliance and check if there is any damage to it. Do not connect the appliance if it is damaged. Report possible damages immediately to the retailer you purchased from. In the case of any damages, keep the packaging for proof.
- We advise waiting at least four hours before plugging in the appliance to allow the oil to flow back into the compressor.
- There should be adequate air circulation around the appliance. Poor air circulation may lead to overheating. To achieve sufficient ventilation, follow the instructions relevant to installation.
- Wherever possible, make sure the product spacers are against a wall to avoid touching or catching warm parts (compressor, condenser), resulting in possible burning.
- The appliance must not be located adjacent to radiators or cookers.
- Make sure that the power plug is accessible after installing the appliance.
- Allow the refrigerator to stand for 2-3 hours after installation before placing food inside.
SERVICE
- A qualified electrician should carry out any electrical work or service required.
- An authorized Service Center must service this product, and only genuine spare parts must be used.
ENERGY SAVING
- Do not put hot food in the appliance
- Do not pack food close together as this prevents air from circulating
- Make sure food does not touch the back of the compartment(s)
- If the electricity goes off, do not open the door(s)
- Do not open the door(s) frequently
- Do not keep the door(s) open for extended periods of time
- Do not set the thermostat to exceedingly cold temperatures
- Some accessories, such as drawers, can be removed to create larger storage volume and lower energy consumption
Product Legend
- Freezer Shelf
- Adjustable Shelves
- Crisper
- Door Shelves
Note: The above picture is for reference only. The manufacturer reserves the right to change or alter the product as necessary.
Product Usage Instructions
- Register your product to protect your purchase. You can register easily with your smartphone by texting a photo of the camera icon to 71403 with the code TCLREF or register online at register.tcl.com. If you need help, visit photoregister.com/help or text HELP to 71403.
- Before using the refrigerator, read the manual and all instructions completely and carefully to reduce the risk of fire, electric shock, or personal injury.
- Place the refrigerator in a suitable location away from heat sources such as direct sunlight, stoves, and heaters.
- Ensure that there is enough space around the refrigerator for proper ventilation.
- Plug the refrigerator into a grounded electrical outlet.
- Adjust the temperature control to the desired setting.
- Store food items in the refrigerator’s adjustable shelves, crisper, and door shelves. Do not overload the shelves and ensure that there is enough space between food items for proper air circulation.
- To reverse the door, carefully follow the steps provided in the manual. Use a flat screwdriver and Philips screwdriver to remove the top hinge cover, unscrew the top hinge, remove the pin hole plug, move the hole plug from left to right side, lift the upper door and place it on a padded surface, unscrew and remove the middle hinge, and lift the bottom door and put it on a soft pad to avoid scratches.
- If you have any questions or concerns about the product, contact TCL Support at support.tcl.com/us or call 1-877-300-9134.
Register and protect your purchase
Register easily with your smartphone
Text a photo of the camera icon to 71403
Or register online at register.tcl.com
Need help? Visit photoregister.com/help or
text HELP to 71403 Add a TCL Protection Plan when you register your product
and be covered from life’s mishaps
Thank you for choosing TCL. We want your ownership experience to bring you as
much joy as the product you purchased does, so we’re offering you a special
price on TCL Protection Plans when you purchase during registration. Add a TCL
Protection Plan within your first 30 days of ownership to receive the best
value and we’ll make sure nothing gets in the way of you enjoying your new
product. *Extended service plans (i.e., “Protect” and “Plus” plans) are only
offered in the United States (US). All TCL products continue to offer a
limited consumer warranty in both the US and Canada. Please refer to the
warranty section in this guide for additional details on warranty information.
ENVIRONMENT PROTECTION
This appliance does not contain gasses that could damage the ozone layer in
either its refrigerant circuit or insulation materials. The appliance should
not be discarded in urban refuse and rubbish. The insulation foam contains
flammable gases: the appliance should be disposed of according to local
authorities. Avoid damaging the cooling unit, especially the heat exchanger.
The materials used in this appliance marked by the recycle symbol are
recyclable.
This symbol on the product or on its packaging indicates that this product may
not be treated as typical household waste. Instead, it should be taken to the
appropriate collection point for the recycling of electrical and electronic
equipment. Ensuring this product is
disposed of correctly will help prevent potential negative environmental and
human health consequences, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed information about the
recycling of this product, please contact your local council, your household
waste disposal service or the shop where you purchased the product.
Door Reversal
The illustrations for door reversal depict parts that may vary slightly between various models. Tools required: Philips screwdriver, flat bladed screwdriver, and socket wrench set.
- • Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards.
Rest the unit on something solid so that it will not slip during the door reversing process.
• All parts removed must be saved to the reinstall the door.
• Do not lay the unit flat on its back as this could damage the coolant system.
• It is recommended that two people handle the unit during assembly.
- Step 1: Carefully remove the top hinge cover with flat screwdriver.
- Step 2: Unscrew the top hinge with a Philips screwdriver.
- Step 3: Remove the pin hole plug with a flat screwdriver.
- Step 4: Move the hole plug from left side to right side, and then lift the upper door and place it on a padded surface to prevent it from scratching.
- Step 5: Unscrew and remove the middle hinge and then lift the bottom door and put it on a soft pad to avoid scratches.
- Step 6: Using a flathead screw driver pry up the two hinge hole covers and move them to the other side.
- Step 7: Tilt back the rear of cabinet on a soft pad and unscrew the bottom hinge and leveling foot.
- Step 8: Using a socket wrench unscrew and remove the bottom hinge pin, turn the bracket over and replace it on the left side of the unit.
- Step 9: Unscrew and remove corner screw.
- Step 10: Install the hinge at left side and foot base at right side. Then screw two leveling feet with their original parts.
- Step 11: Stand up the unit and put the door on the bottom hinge. Make sure the bottom hinge core is inserted in the door hole. Then move the hinge hole cover of bottom door from left side to right side.
- Step 12: Install the middle hinge.
- Step 13: Install the upper door with the upper hinge.
- Step 14: Snap in the hinge cover and hole cover on the top of unit.
Installation
Space Requirement
- Keep enough space for door to open.
- Keep at least 50mm (2 inches) gap at back of unit and on sides for proper ventilation.
Levelling the Unit
- To do this adjust the two levelling feet at front of the unit.
- If the unit is not level the doors and magnetic seal alignments will not be covered properly.
Location
The appliance should be installed well away from any sources of heat such as
radiators, boilers, direct sunlight etc. Ensure that air can circulate freely
around the back of the cabinet. To ensure the best performance when positioned
below an overhanging wall unit, the minimum distance between the top of the
cabinet and the wall unit must be at least 100 mm (4 inches).
Ideally, however, the appliance should not be positioned below overhanging
wall units.
Do not stand on or place flammable objects or toxic chemicals on top of the
refrigerator.
WARNING!
Electrical Connection
Before plugging in the unit, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply. The appliance must be grounded using a main wall outlet. The power supply cable is provided with a contact for this purpose. If the domestic power supply socket is not grounded, connect the appliance to a different outlet in compliance with current regulations, consulting a qualified electrician if necessary. The manufacturer declines all responsibility if the above safety precautions are not observed.
Daily Use
Cleaning the Interior Before Use
Before using the appliance for the first time wash the interior and all
internal accessories with lukewarm water and some neutral soap so as to remove
the typical smell of a brand new product then dry thoroughly.
Important! Do not use detergents, harsh chemicals, or abrasive powders as
these will damage the finish. Do not spray water directly on the inside or
outside of the refrigerator.
Temperature Setting
- Plug on your appliance. The internal temperature is controlled by a thermostat. There are 8 settings. 1 is warmest setting and 7 is coldest setting and O is off.
- The appliance may not operate at the correct temperature if it is in a particularly hot space or if you open the door often.
Adjustable Shelves
The walls of the refrigerator are equipped with a series of runners so that
the shelves can be positioned as desired.
Cleaning
The appliance interior, including interior accessories, should be cleaned
regularly.
Caution! Remove and disconnect all power to the accessory before cleaning to
avoid the dangers of electric shock. To remove and disconnect all power,
switch the appliance off and remove the plug from the main outlet, or switch
the unit off and turn off the circuit breaker or fuse. Never clean the
appliance with a steam cleaner as moisture could accumulate in electrical
components, causing electrical shock! Hot vapors can also damage plastic
parts. The appliance must be completely dry before turning it on and
continuing use.
Important! Ethereal oils and organic solvents can damage plastic parts,
e.g. lemon juice or the juice from an orange peel, butyric acid, and cleaners
that contain acetic acid. Do not allow such substances to come into contact
the appliance parts. Do not use any abrasive cleaners.
- Remove the food from the freezer. Store them in a cool place, well covered.
- Switch the appliance off and remove the plug from the mains, or switch off or turn out the circuit breaker of fuse.
- Clean the appliance and the interior accessories with a cloth and lukewarm water. After cleaning wipe with fresh water and rub dry.
- After everything is dry place appliance back into service.
Defrosting of the freezer
The freezer compartment will become progressively covered with frost. This
should be removed. Never use sharp metal tools to scrape off frost from the
evaporator as you could damage it. However when the ice becomes very thick on
the inner liner complete defrosting should be carried out as follows:
- Pull out the plug from the outlet
- Remove all stored food wrap it in several layers of newspaper and put it in a cool place.
- Keep the door open and placing a basin underneath the appliance to collect the defrost water.
- When defrosting is completed dry the interior thoroughly
- Replace the plug in the power outlet to run the appliance again.
Replace the lamp
Caution! Before replacing the lamp, shall disconnect the appliance from mains
power supply.
Lamp specification is listed in rating label. Follow below process to replace
the lamp:
- Set the temperature regulation knob at number “0” to switch off the appliance.
- Unplug the appliance to make sure the appliance is disconnected from main power supply.
- Remove the screw of the lamp cover.
- Pull the lamp cover out.
- Unscrew the lamp.
- Fit new lamp according to the opposite direction, then replace the lamp cover and screw.
- Plug in the appliance and regulate the knob to right position.
Troubleshooting
Caution! Before troubleshooting disconnect the power supply.
Only a qualified service professional must do the troubleshooting that is not
in this manual.
Important! There are some sounds during normal use including compressor
operation and circulation of refrigerant.
PROBLEM | POSSIBLE CAUSES | SOLUTIONS |
---|
Appliance does not work
| Temperature regulation knob is set at number -O| Set the knob at other
number to switch on the appliance.
Power cord is not plugged in or is loose.|
Insert plug in outlet.
Outlet is not powered.
| Test outlet with lamp or other electrical device. If not powered, check household circuit breaker or fuse.
Power outlet is not working.
|
To be corrected by an electrician.
The food is too warm
|
Temperature is not properly adjusted.
| Please see initial Temperature setting section.
Door was open for an extended period.
| Open the door only as long as necessary.
A large quantity of warm food was placed in the appliance within the last 4
hours.| Turn the temperature regulation to a colder setting temporarily.
The appliance is near a heat source.
| Please refer to the installation location section.
Appliance cools too much|
Temperature is set too cold.
| Turn the temperature regulation knob to a warmer setting temporarily.
Unusual noises
|
Appliance is not level.
|
Adjust the leveling legs..
The appliance is touching the wall or other objects.|
Move the appliance slightly.
A component e.g. a pipe on the rear of the appliance is touching another part of the appliance or the wall.| If necessary carefully bend the component out of the way.
Water on the floor
|
Water drain hole is blocked.
|
Refer to the Cleaning section.
Side panel is hot
|
Condenser is inside the panel.
|
This is normal.
If problems are recurring, please contact our Service Center for assistance.
TCL NORTH AMERICA LIMITED PRODUCT WARRANTY
What your warranty covers: Defects in materials or workmanship to the original owner of this TCL product when purchased as new from an Authorized Dealer of TCL brand products and packaged with this warranty statement
WARRANTY PERIOD (NON-COMMERCIAL USE):
Labor: Twelve (12) Months from the original date of purchase. Parts: Twelve
(12) Months from the original date of purchase.
WARRANTY PERIOD (COMMERCIAL USE):
Labor: Six (6) Months from the original date of purchase. Parts: Six (6)
Months from the original date of purchase.
Commercial Use includes, but is not limited to, the use of this product in a
commercial or business environment, the use of this product in an institution
or for institutional purposes, or for other commercial purposes including
rental purposes.
Should your TCL device prove to be defective in material or workmanship under
normal use during the warranty period listed above, effective from the date of
original consumer purchase of the product, TCL North America at its sole
discretion will, (1) pay an Authorized TCL Service Center for both labor
charges and parts to repair your device, or (2) replace your device with a new
or refurbished/recertified equivalent product. If repaired at an Authorized
TCL Service Center, TCL is not responsible for the transportation costs to the
Authorized TCL Service Center. However, TCL will pay for the return shipping.
TCL will provide instructions for the packaging and shipping of the unit.
Units that are improperly packed and damaged during shipping are not covered
under this limited product warranty. This limited product warranty is good
only to the original purchaser of the product and effective only when used in
North America. You must have your original purchase receipt or proof of
purchase (bill of sale or receipted invoice) which states the condition of the
unit (new, used), the unit’s date of purchase, place of purchase, and
model/serial number.
HOW SERVICE IS HANDLED: Call 1-800-825-6747 and choose the appropriate prompt.
Please have product type, model number, serial number, and ZIP code ready.
Troubleshooting and prior approval from a TCL representative MUST occur before
sending in your product for repair.
Product Registration Information
You can find the model number and serial number on a label on the back or side
of the product. Register your product online at
register.tcl.com.
NO OTHER WARRANTY IS APPLICABLE TO THIS PRODUCT. THIS LIMITED WARRANTY IS IN
LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE
EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO
THE EXPRESS WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS
DISTRIBUTOR SHALL BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT,
SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST
REVENUES OR PROFITS, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR
OTHERWISE. SOME STATES AND/OR TERRITORIES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATIONS ON THE LENGTH
OF TIME AN IMPLIED WARRANTY LASTS, SO THE ABOVE EXCLUSION OR LIMITATION MAY
NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU, THE ORIGINAL PURCHASER,
SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE
TO STATE OR TERRITORY TO TERRITORY. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT
NOTICE. PLEASE VISIT WWW.TCL.COM/US TO VIEW THE MOST CURRENT VERSION.
THIS LIMITED PRODUCT WARRANTY DOES NOT APPLY TO:
-
Service calls to your home for delivery or pick-up, installation, instruction, replacement of house fuses, connection of house wiring or plumbing, or to correct unauthorized repairs.
-
Failure of the product to perform due to wireless signal reception problems not caused by your unit, or due to power failures or interruptions or inadequate electrical service.
-
Damage caused by transportation or handling, including damage during shipment from a Retailer (please contact your Retailer
for assistance). -
Damage caused to the product by accident, vermin, lightning, wind(s), fire, flood(s), or act(s) of God.
-
Damage caused by operating the product in a corrosive or
wet atmosphere. -
Repairs when your TCL product is used in other-than-normal, single-family household use, or contrary to the instructions described in the product User’s Guide.
-
Damage resulting from accident, alteration, misuse, abuse, neglect, insects, normal wear-and-tear, cosmetic damage, mishandling, power line surges, improper or faulty installation, or improper repair or maintenance. Improper repair includes the use of parts not approved or specified by TCL.
-
Markings or images on the product’s display panel.
-
Normal maintenance as described in the User’s Guide (including but not limited to cleaning or replacing filters, cleaning coils, or other normal maintenance).
-
Use of accessories or components that are not compatible with this product
-
Products with altered, missing, defaced, unreadable, or removed serial numbers.
-
Changes in the appearance of the product that do not affect product performance.
-
Increases in utility costs and/or additional utility expenses.
-
Products purchased from non-authorized TCL resellers.
-
Products sold in any condition other than new from the original manufacturer or sold outside of North America.
The cost of repair or replacement under these excluded circumstances shall be
borne by the consumer.
CONTACT INFORMATION:
TCL North America
1860 Compton Ave
Corona, California 92881
1-800-825-6747 www.tcl.com/us
References
- Photoregister | Help
- | TCL
- TCL Support
- TCL USA | TVs, Sound Bars, Phones, Appliances
- TCL USA | TVs, Sound Bars, Phones, Appliances
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>