MARMITEK Sense ME Zigbee Motion Sensor User Guide

June 3, 2024
MARMITEK

MARMITEK - logoSense ME Zigbee Motion Sensor
User Guide

Package content

motion sensor
CR2450 battery
magnetic wall mount
3M adhesive tape
quick guide
This product requires a Zigbee gateway (sold separately).

Marmitek Smart me app

MARMITEK Push LE WHT BLK Smart Zigbee Switch - qr codehttp://www.marmitek.com/media/qr/Smart_me_ug_store_aa_01.html

Multi language user guide

MARMITEK Push LE WHT BLK Smart Zigbee Switch - qr code
2http://www.marmitek.com/media/qr/ple_ug_ma_aa_01.html

Safety Instructions

Please read these instructions thoroughly before you use the device and keep them for future reference.
Only for indoor use.

  • Do not expose the product to extremely high or low temperatures, strong light sources or direct sunlight.
  • This product is not a toy. Keep out of reach of children.
  • Dispose of batteries as chemical waste. Remove the batteries when you are not using the system for a longer period of time. Check the polarity (+/-) of the batteries  when inserting them in the product. Wrong positioning can cause an explosion.
  • Repairs or service should only be performed by qualified personnel.

Requirements
This product requires a Smart me Zigbee Gateway (sold separately) that is connected to the Internet.

Installation of the Smart me app

Download and install the Marmitek Smart me app from the Apple app store or the Google Play store.
Launch the Smart me app after installation is completed.
Follow the instructions and register for a new account.

Installation of the Sense MA

  • Open the housing of the Sense MA by unscrewing the top and pull the plastic battery strip to activate the battery.
  • The indicator light should start flashing quickly. If the indicator light does not flash, press the reset button for 5 seconds until it starts flashing.
  • Launch the Smart me app from your smart phone or tablet.
  • Select the Smart me Zigbee Gateway.
  • Click on the + (at the bottom of the screen) to add a new product, confirm that the indicator light is flashing quickly and follow the instructions.
  • Press Help button during installation for more information or when installation fails.

Notes for using the product

  • After the installation is completed you can configure the Sense MA by using the app.
  • Check our website www.marmitek.com for more details and how to use the Smart me products.

Technical specifications

Type Water leakage & flooding
Detection water level 0.5mm
IP code IP66 (water resistant)
Battery life 3 years
Wireless technology Zigbee 3.0
Operating range up to 30 meters
Power Battery CR2032
Standby current < 5μA
Dimensions (h x w x d) 46 x 46 x 14 mm

MARMITEK Sense ME Zigbee Motion Sensor - Figure 1

Declaration of Conformity
Hereby, Marmitek BV, declares that the Sense MA is in compliance with the essential requirements of the 2014/53/EU Directives.
Full Declaration of Conformity is available at www.marmitek.com/en /declarations-of-conformity/ 
More detailed user guide and instructions are available on our website at www.marmitek.com

20752/20210623 | Push LE™
all rights reserved © MARMITEK
stay connected
marmitek.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals