MARMITEK Connect DA21 Digital To Analogue Audio Convertor User Manual

June 3, 2024
MARMITEK

Connect DA21 Digital To Analogue Audio Convertor
User Manual

Safety instructions

Please read these instructions thoroughly before you use the device and keep them for future reference.

  • To prevent short circuits, this product should only be used inside and only in dry spaces. Do not expose the components to rain or moisture. Do not use the product close to a bath, swimming pool, etc.
  • Do not expose the components of your systems to extremely high temperatures or bright light sources.
  • In case of improper usage or if you have altered and repaired the product yourself, all guarantees expire. Marmitek does not accept responsibility in the case of improper usage of the product or when the product is used for purposes other than specified. Marmitek does not accept responsibility for additional damage other than covered by the legal product responsibility.
  • This product is not a toy. Keep out of reach of children.
  • Do not open the product (battery panel excepted): the device may contain live parts. The product should only be repaired or serviced by a qualified expert.
  • Keep batteries out of the reach of children. Dispose of batteries as chemical waste. Never use old and new batteries or different types of batteries together. Remove the batteries when you are not using the system for a longer period of time. Check the polarity (+/-) of the batteries when inserting them into the product. Wrong positioning can cause an explosion.
  • Only connect the adapter to the mains after checking whether the mains voltage is the same as the values on the identification tags. Never connect an adapter or power cord when it is damaged. In that case, contact your supplier.

Introduction

Congratulations on the purchase of your Marmitek Connect DA21™! This converter changes a digital Toslink or Coaxial signal into a left/right stereo signal. Easily and quickly connect your Audio Source to your Audio Amplifier.
Marmitek products are manufactured with the utmost care and are exceptionally high quality. Please read this manual carefully and follow the instructions in order to get the best from this product.

Set contents

  • 1x Connect DA21™ audio converter
  • 1x RCA audio cable
  • 1x Power adapter
  • 1x Instructions

Advantages

  • Convert your digital audio signals (Toslink or Coaxial) to a left/right stereo audio signal.
  • Perfect if your Audio Amplifier has too few or no digital audio inputs.
  • With an improved 192kHz sample rate for the best sound reproduction.
  • Supports uncompressed digital stereo signals.
  • Supports 16 or 24bit; 8, 32, 44.1, 48, 96, 176.4 and 192kHz sample frequencies.

Installation

Note:

  • We recommend that you switch off your equipment before connecting cables in order to prevent any of the devices from being damaged.
  • At all times, avoid bending the optical (Toslink) cable as it is very delicate.

MARMITEK Connect DA21 Digital To Analogue Audio Convertor - Fig
1

  1. Connect the Audio Source to one of the digital audio inputs [1] on the Connect DA21™ using the optical or coaxial audio cable.
  2. Connect the Audio Amplifier to the stereo audio outputs [2] on the Connect DA21™ using the (supplied) RCA stereo audio cable.
  3. Connect the power adapter [3] and plug it into the electrical socket.
  4. Use the switch [4] to select which digital audio input (Coaxial or Optical) is connected to the Connect DA21™.
  5. Switch your device on and check that the audio connection works.

Usage

If the audio connection does not work (properly), consult the instructions for the Audio Source and/or the Audio Amplifier for the correct settings.

Frequently asked questions (FAQs)

Please go to www.marmitek.com if you have any questions.

Technical specifications

Inputs and outputs

Audio input| 1x optical (Toslink), 1x coaxial (RCA)
Audio output| 1x left/right stereo (RCA)
Supported Audio Format| 2CH, LPCM
Housing
Dimensions (H x W x D)| 80 x 51 x 23mm
Weight| 45 g
Power
External Power adapter| 100-240VAC @ 50-60Hz
Input| 5VDC @ 500mA

Notification

10.1 Declaration of Conformity
Hereby, Marmitek BV, declares that this Connect DA21™ is in compliance with the essential requirements and other relevant provisions of the following Directives:
Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonization of the laws of the Member States relating to electromagnetic compatibility (recast)
Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonization of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits.
Directive (EU) 2017/2102 of the European Parliament and of the Council of 15 November 2017 amending Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Commission Regulation (EU) 2019/1782 of 1 October 2019 laying down Ecodesign requirements for external power supplies pursuant to Directive 2009/125/EC of the European Parliament and of the Council and repealing Commission Regulation (EC) No 278/2009.
You can read the full Declaration of Conformity at http://www.marmitek.com
10.2 Recycling
Environmental Information for Customers in the European Union and other European countries with separate collection systems.
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product.
10.3 Copyrights
Marmitek is a trademark of Germatron B.V. Connect DA21™ is a trademark of Marmitek B.V. All rights reserved. Every effort has been made to ensure that the information in this manual is accurate. Marmitek is not responsible for printing or clerical errors. Copyright and all other proprietary rights in the content (including but not limited to model numbers, software, audio, video, text, and photographs) rests with Marmitek B.V. Any use of the Content, but without limitation, distribution, reproduction, modification, display or transmission without the prior written consent of Marmitek is strictly prohibited. All copyright and other proprietary notices shall be retained on all reproductions. Other company and product names mentioned herein may be trademarks of their respective companies. Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Marmitek assumes no responsibility with regard to the performance or use of these products.

20522/20200318
Connect DA21™
All rights reserved © MARMITEK
Marmitek BV
PO Box 4257
5604 EG Eindhoven
The Netherlands
marmitek.com
Stay connected

Documents / Resources

| MARMITEK Connect DA21 Digital To Analogue Audio Convertor [pdf] User Manual
Connect DA21 Digital To Analogue Audio Convertor, Connect DA21, Digital To Analogue Audio Convertor, Analogue Audio Convertor, Audio Convertor, Convertor
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals