MARMITEK Push LE WHT/BLK Smart Zigbee Switch User Guide
- June 3, 2024
- MARMITEK
Table of Contents
Push LE WHT/BLK Smart Zigbee Switch
User Guide
Package content
1x smart switch
1x CR2430 battery
1x 3M adhesive tape
1x quick guide
This product requires a Zigbee gateway (sold separately).
Marmitek Smart me app
http://www.marmitek.com/media/qr/Smart_me_ug_store_aa_01.html
Multi language user guide
http://www.marmitek.com/media/qr/ple_ug_ma_aa_01.html
Safety Instructions
Please read these instructions thoroughly before you use the device and keep
them for future reference.
Only for indoor use.
- Do not expose the product to extremely high or low temperatures, strong light sources or direct sunlight.
- This product is not a toy. Keep out of reach of children.
- Dispose of batteries as chemical waste. Remove the batteries when you are not using the system for a longer period of time. Check the polarity (+/-) of the batteries when inserting them in the product. Wrong positioning can cause an explosion.
- Repairs or service should only be performed by qualified personnel.
Requirements
This product requires a Smart me Zigbee Gateway (sold separately) that is connected to the Internet. Follow the instructions for the Smart me Gateway to add it.
Installation of the Smart me app
Download and install the Marmitek Smart me app from the Apple app store or the
Google Play store.
Launch the Smart me app after installation is completed.
Follow the instructions and register for a new account.
Installation of the Push LE
- Open the Push LE housing by sliding the front to the left and pull the plastic battery strip to activate the battery.
- The indicator light should start flashing rapidly. If the light does not blink, press push button 1 for 10 seconds until it starts to blink.
- Launch the Smart me app from your smart phone ortablet.
- Select the Smart me Zigbee Gateway.
- Click on the + (at the bottom of the screen) to add a new product, confirm that the indicator light is flashing quickly and follow the instructions.
- Press Help button during installation for more information or when installation fails.
Notes for using the product
- After the installation is completed you can configure the Push LE by using the app.
- Check our website www.marmitek.com for more details and how to use the Smart me products.
Technical specifications
Triggered action | One click, double click, long press 5s |
---|---|
Battery life | 50.000 clicks – 2 years @ 30 per day |
Wireless technology | Zigbee 3.0 |
Operating range | up to 30 meters in open area |
Power | Battery CR2430 |
Standby current | 20μA |
Dimensions (h x w x d) | 86 x 86 x 13 mm |
IP code | 20 (not dust proof, not waterproof) |
Declaration of Conformity
Hereby, Marmitek BV, declares that the Push LE is in compliance with the
essential requirements of the 2014/53/EU Directives.
Full Declaration of Conformity is available at www.marmitek.com/en
/declarations-of-conformity/
More detailed user guide and instructions are available on our website at
www.marmitek.com
20752/20210623 | Push LE™
all rights reserved © MARMITEK
stay connected
marmitek.com
References
- Marmitek | Specialist for 25 years | Wireless HDMI & audio and Smart Home
- Marmitek | Al 25 jaar specialist in slimme oplossingen
- Declarations of Conformity | Marmitek
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>