MARMITEK WHE4 4K Wireless HDMI Extender User Guide

MARMITEK WHE4 4K Wireless HDMI Extender

Specifications

• Model: Marmitek WHE4TM
• Signal: 4K HDMI
• Resolution: 4K60 Ultra HD
• Transmission: Wireless up to 50 meters
• Includes: 1x 4K transmitter, 1x 4K receiver, 1x IR emitter, 1xmicro-USB cable, 2x 4K HDMI cable, 2x power adapter, 2x power USB cable, 1x user guide

Package content

• 1x 4K transmitter
• 1x 4K receiver
• 1x IR emitter
• 1x micro-USB cable
• 2x 4K HDMI cable
• 2x power adapter
• 2x power USB cable 1x user guide

Safety instructions

Please read these instructions thoroughly before you use the device and keep them for future reference.

• Only for indoor use.
• Do not use the product in a damp environment or near water.
• Do not expose the product to extremely high or low temperatures, strong light sources or direct sunlight.
• This product is not a toy. Keep out of reach of children.
• Connect the adapter to the mains only after you have verified that the line voltage corresponds to the value specified on the type plates.
• Never connect a power adapter if it’s damaged. In such cases, please contact your supplier.
• Disconnect the AC/DC power adapter from the mains when this device is not in use for a prolonged time.
• Never open the product: the device may contain parts with deadly voltage.
• Repairs or services should only be performed by qualified personnel.
• Improper use, self-installed modifications, or repairs will void any and all warranties.
• Marmitek does not accept any product responsibility for incorrect use of the product or use other than for which the product is intended.

Marmitek does not accept liability for any consequential damage other than the legal product responsibility

Getting started

Installation tips

• First, turn off all devices (TV and HDMI sources) before connecting them to the Marmitek WHE4™. If a device cannot be turned off, please remove its plug from the wall socket.
• For the best picture and sound quality, only use Premium High-Speed HDMI® certified cables.

Connecting the 4K transmitter
The transmitter sends the video signal wirelessly to the receiver in another room. Therefore, place the transmitter near your HDMI source device (TV decoder, Blu-ray player, Desktop PC, etc)

1. Use the HDMI cable to connect the HDMI source to the HDMI port marked “HDMI IN”(1) on the 4K transmitter.
2. Optional: To continue watching TV in this room as well, use an HDMI cable (not supplied) to connect a TV to the HDMI port marked “HDMI OUT”(2).
3. Connect the power adapter to the connector marked “POWER”(5) and insert the plug into the wall socket.

Connecting the 4K receiver
Place the receiver in the room where you want to connect the second TV or projector.

1. Use the HDMI cable to connect your TV or projector to the HDMI port marked “HDMI OUT”(2) on the 4K receiver.
2. Connect the power adapter to the connector marked “POWER”(5) and insert the plug into the wall socket.

Connecting infrared return
The Marmitek WHE4™ has a built-in “infrared return feature” that enables continued operation of the connected HDMI source from another room. For example, operate your HDMI source downstairs from your bedroom (location of second TV).

Placement of IR receiver
The IR receiver receives the commands sent by your (infrared) remote control and sends these to the IR emitter, enabling you to operate your connected HDMI source.

• The IR receiver is located behind the front panel of the 4K receiver. Make sure to place the 4K receiver in line of sight with the remote control (max. 10 meters) for proper reception.
• Please experiment with the correct placement before the final placement of the 4K receiver.

Placement of IR emitter
The IR emitter receives the commands sent by the IR receiver and forwards them to your connected HDMI source.

• Connect the IR emitter cable to the 4K transmitter’s connector marked “IR”(4).
• Make sure that the led of the IR emitter cable is attached exactly to the HDMI source’s infrared sensor (with some equipment, this needs to be done very precisely). The exact position can be found more easily by shining a torch on the front panel, searching for the IR sensor window.
• Please experiment with the correct placement before the final attachment of the IR led.

Please note! The adhesive strip may cause discoloration on certain surfaces, or leave adhesive residues after removal.

Testing the IR return function
Once you have connected the IR emitter cable according to the above description, it is recommended to test the function first.

• Aim your remote control towards the IR receiver on the 4K receiver and send a command.
• The IR Receiver will now send this command to the 4K transmitter.
• The HDMI source should now execute the function associated with the command sent by your remote control.

Connecting the USB extension
In addition to the infrared return feature, the Marmitek WHE4™ also features a built-in USB extension function. This helps you to continue to operate connected HDMI sources, such as a Media Center PC or laptop, from another room, using a mouse and/or keyboard.

To the 4K transmitter
Using the included Micro USB cable, connect your PC or laptop to the Micro USB socket marked “PC”(3) on the 4K transmitter.

To the 4K receiver
Connect your mouse and/or keyboard to the connectors marked with the keyboard and mouse symbol(7) on the 4K receiver. You can also use a wireless Bluetooth® mouse and keyboard, in that case insert the Bluetooth® receiver in one of the USB ports of the 4K receiver.

Testing the USB Extension Function
Once you have connected the Micro USB cable and your mouse/keyboard according to the above description, it is recommended to test the feature first.

• Take your mouse/keyboard and use one of the functions.
• The 4K receiver will now send this function to the 4K transmitter.
• The Media Center PC or laptop should now execute the function of your mouse/keyboard.

Use

4K transmitter and receiver

1. Turn ON the second TV or projector and select the correct HDMI input to which the 4K receiver is connected.
2. Turn ON the HDMI source.
3. Use the switch at the back to turn ON the 4K transmitter and receiver.
4. During system startup (30 sec.) a startup screen will appear on the 4K receiver and the status LED on both the 4K transmitter and 4K receiver will flash until the signal connection between the two has been established.
5. When the connection is established and the HDMI source is properly connected, a video signal will appear on the (second) TV.
6. With proper operation, the LED on the top of the 4K transmitter and receiver will be solid blue.
7. If no video signal appears, check the lights according to the overview in section 2.3.

Please note : To be able to watch TV locally (via the HDMI output of the transmitter), the 4K transmitter should always be switched on.

4K transmitter only
When you do not want to watch video on the second TV or projector, you can turn off the 4K receiver and keep watching video over your transmitter. While watching video over your 4K transmitter only, you can also view your 4K video in HDR.

Status of the lights
The LED in the top plate will indicate the status of the 4K transmitter and receiver:

4K transmitter

Red (blinking)| Starting up
Blue (blinking)| Waiting for connection
Blue| Connected
Purple| No supported video signal
4K Receiver

Red (blinking)| Starting up
Blue (blinking)| Waiting for connection
Blue| Connected

FAQs

Frequently asked questions
Tip: Testing over a long distance is difficult. First, place the 4K transmitter and receiver in the same room (minimum 2 meters apart) to test if everything works, and only then place the 4K receiver in another room.
No (or poor) image and sound on TV or projector

• Ensure that the ON/OFF switches at the back of the transmitter and receiver are in the ”ON” position.
• Ensure that all HDMI cables are connected properly or replace them.
• Ensure that the HDMI source is turned ON and the correct HDMI input is selected on the TV.
• Ensure that the HDMI source is set to the correct video resolution. If necessary, consult the user manual of your HDMI source.
• Disconnect the power adapters from the wall socket and reconnect them to reboot the Marmitek WHE4.

No or bad connection between the 4K transmitter and 4K receiver

• Move the 4K transmitter and/or the 4K receiver from the immediate vicinity of the connected HDMI sources and Wi-Fi equipment. These may affect the range.
• Slightly adjusting the position of the 4K transmitter and/or 4K receiver may already help out.
• Too much distance between the 4K transmitter and the 4K receiver. Try using shorter distances.

I do have a picture, but no (or bad) sound
The Marmitek WHE4 supports up to 2CH PCM stereo.

• Check the audio setting in the settings menu of the connected HDMI source and manually set it to 2CH PCM stereo when the automatic setting does not work.

The IR return function is not working

• Ensure that the IR LED is properly plugged in.
• Experiment with the location of the IR receiver and IR-led cable.
• The IR receiver has a reception sensitivity of max. 10 metres.
• The range is also dependent on the remote control used.

Do you have any questions that are not answered here? Then please visit www.marmitek.com

Product details

Technical specifications

• Connections transmitter
  • Input 1x HDMI (female)
  • Output 1x HDMI (female)
  • 1x IR 3,5mm Jack( female)
  • 1x micro-USB(female)
• Connections receiver
  • Input 2x USB-A (female)
  • Output 1x HDMI (female)
• Video
  • Supported resolutions, Max. 4K60 (3840 x 2160@60 Hz)
  • HDMI standards HDMI 2.0, HDR (TX only), EDID and HDCP 2.2
• Audio
  • Supported audio 2CH PCM audio, 16bits – 44.1KHz
• Technology
  • Operational frequency 5 GHz
  • Range Up to 150 meters clear field and up to 50 meters through floors and walls
  • Latency (lag ) <100ms
• Infrared return function
  • Frequency range 30 ~ 60kHz

Housing and environment

• Dimensions 155 x 77 x 22 mm
• Weight 320 g
• Ambient temperature 0 ~ 40° C
• Humidity 10% ~ 80%

Power supply

• External power adapter 100-240VAC @50-60Hz, 5VDC @ 2A
• Power consumption(max) 7W

Specifications may change without prior notice.

Declaration of Conformity
Hereby, Marmitek BV, declares that this Marmitek WHE4™ complies with the essential requirements and other relevant provisions of the following Directives:

Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonization of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC.
Directive 2011/65/EU of the European Parliament and of the Council of 15 November 2017 amending Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
Commission Regulation (EU) 2019/1782 of 1 October 2019 laying down eco-design requirements for external power supplies according to Directive 2009/125/EC of the European Parliament and of the Council and repealing Commission Regulation (EC) No 278/2009.

You can read the full Declaration of Conformity at
http://www.marmitek.com

References

• Marmitek | Al 25 jaar specialist in slimme oplossingen

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>