NEXIGO LT21 Nebula Night Light User Manual
- June 3, 2024
- NEXIGO
Table of Contents
LT21 Nebula Night Light
User Manual
User Manual
LT21 Nebula Night Light
Register to get an EXTRA ONE year warranty.
Only valid if registering within 14 days of product delivery.
nexigo.com/warranty
Welcome to the NexiGo Family!
Thank you for choosing the NexiGo Nebula Night Light! You are now part of an
exclusive club: the NexiGo family! It’s our job to make sure you enjoy your
membership. If you have any problems please contact us at
cs@nexigo.com at any time for further assistance. This
product is covered by our industry leading 1-year manufacturers warranty. Make
sure to register your purchase at
nexigo.com/warranty for a FREE additional 1-year
warranty!
From all of us here at NexiGo, we want to welcome you again to the family. We
thank you deeply for your trust and for your business. We know you’ll love it
here. We look forward to serving you again in the near future.
Yours Sincerely
The NexiGo Team
Contact Information
Website: www.nexigo.com
Manufacturer: Nexight INC
Email: cs@nexigo.com
Tel: +1(458) 215-6088
Address: 11075 SW 11th St, Beaverton, OR, 97005, US
Product Diagram
What’s in the Box?
1 x Baby Night Light
1 x Carabiner
1 x Metal Plate with Tape
1 x USB Charging Cable
1 x User Manual
Specifications
| Product Name | NexiGo Nebula Night Light |
|---|---|
| Model | LT21 |
| Luminous Flux | 180 Lumens (Max) |
| Power Consumption | 2W |
| Power Input | DC 5V/1A |
| Color Temperature | 3000K/6500K & RGB |
| Battery Capacity | 2200mAh |
| Charging Time | 3.5 Hours |
| Working Time | S Hours (Brightest Setting), 118 Hours |
(Dimmest Setting), 400 Hours (Night Light Mode)
Dimensions| 3.74 x 3.74 x 3.54 Inches
Usage Instructions:
Power On/Off:
Press and hold the Multi-Function Button on the bottom of the unit for 1.5
seconds to power on/off the light. When the light is switched on, the
Indicator Light displays steady blue (or slowly flashes red when the battery
is below 20%).
Turn On/Off: After the light is powered on, double-tapping the Touch
Control Point to turn on/off the light.
Switch Light Mode: Press the Multi-Function Button to change the Light
Mode of the lamp. The four possible modes are White Light Warm, White Light
Cool, Cycling RGB and Rainbow RGB.
Night Light Mode:
Turn On: First, double tap the Touch Control Point to turn the light off. When
the light is off but powered on, press and hold the Touch Control Point to
turn on the night light. Turn Off: Double tap the Touch Control Point to turn
off the night light.
Adjust the Light Brightness:
(Available in White Light Warm, White Light Cool and Night Light Mode)
Press and hold the Touch Control Point to adjust the brightness. When you
press and hold the Touch Control Point, the light will alternate between
increasing brightness or dimming. Once it reaches maximum brightness or
minimum dimness it will remain at that setting.
Pressing and holding the Touch Control Point again will cause it to reverse.
Note: The Indicator Light will flash green once when the brightness reaches
the maximum or minimum level.
Adjust the RGB Light Changing Speed: (Available in Cycling RGB and
Rainbow RGB Mode) Tap the Touch Control Point to pause RGB/rainbow colors,
taping again to continue the RGB light cycling. Press and hold the Touch
Control Point to increase or decrease the speed that the lamp will cycle
through the colors.
Note: The Indicator Light will flash green once when the speed reaches
the maximum or minimum level
Low Battery Alert: The Indicator Light will slowly flash red when the
battery is below 20%. Please charge the light by connecting it to a power
source (Laptop, computer, etc. / Output: DC 5V/1A) using the provided USB
charging cable.
Micro USB Charging: The Indicator Light will flash red while the light is
charging and turn blue when the light is fully charged. For safety reasons,
please unplug the adapter after the light is fully charged.
Using the Magnetic Light Mounts: The light can directly attach to many
metal surfaces via the magnetic base. For convenient mounting on other
surfaces, a Metal Plate with Tape is included.
- Clean the surface (such as a wall) where you want to place the light. (Sticker may remove paint. Use with care.)
- Peel the backing from the tape side of the metal plate and apply the metal plate to the surface where you want to place the light.
- Press and hold firmly for 30 seconds to secure the metal plate to whatever you are mounting it to.
- After the metal plate is attached, please wait about an hour to make sure the metal plate is firmly attached.
- Place the light’s magnetic base against the metal plate so that it magnetically attaches.
Light Memory Function: T he light will retain brightness and color
settings between uses.
Notes:
- ONLY use a DC SV/1A adapter with the provided USB cable to charge the unit. Using any other power adapter or cable may cause damage to the product.
- When this unit is not in use or when fully charged, it is recommended that you unplug it from the power source.
- Please use a lint-free dry cloth to clean the product. Do not clean the product with water or alcohol. Ensure the unit is unplugged and powered off before cleaning.
- Do not charge the light using a frayed or damaged USB cable.
- Do not touch the device, power adaptor, or USB cable with wet hands. Keep this product dry.
- Do not attempt to repair, disassemble, or modify the light under any circumstance.
- Do not place the light near the fire, heat sources, or direct sunlight.
- Ensure that this product has enough ventilation for general use.
- Only use on a flat, horizontal surface.
- To ensure the longevity and lifespan of the unit, protect it from dust and do not place other objects on it.
facebook.com/nexigol
Get in touch with FREE online services 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>