Retro Web B62 Main Board User Manual
- June 3, 2024
- Retro Web
Table of Contents
Retro Web B62 Main Board
B62 MAIN BOARD
User Manual
B62 Main Board
This user’ s manual describes the jumper setting of B62 Main Board. For
detailed technical information, please refer to CDs attached with PC system
unit.
All other registered and unregistered trademarks are trademarks of their
respective holders
Jumpers Location Diagram for “B62 V1.X ” main board
Memory configuration for “B62 V1.X” main board
| Capacity | DIMM 1 | DIMM 2 |
|---|---|---|
| 16MB | 16MB | none |
| 16MB | none | 16MB |
| 32MB | 16MB | 16MB |
| 32MB | 32MB | none |
| 32MB | none | 32MB |
| 80MB | 16MB | 64MB |
| 80MB | 64MB | 16MB |
| 64MB | 64MB | none |
| 64MB | none | 64MB |
| 128MB | 64MB | 64MB |
| 128MB | 128MB | None |
| **128MB | None | 128MB |
| **256MB | 128MB | 128MB |
IMPORTANT
Net PC NC3 and NC4 series support low profile SDRAM DIMM module provided by
Flytech (FT-100). NC2 series supports both Flytech low profile SDRAM (FT-100)
and standard SDRAM module. In case NC2 series bundled with one CD-ROM and one
FDD and one HDD, please use Flytech low profile SDRAM module (FT-100) due to
height limitation. The model no. “FT-100” is low profile SDRAM DIMM module
produced by Flytech. It meets PC-100 compliant.
- VGA Memory Configuration.
| Capacity | U12 | U13 | Video DRAM Type |
|---|---|---|---|
| 4MB | close | close | 512KB X 32 SOP package |
Jumper Setting
- CPU type selection :
CPU| Freq.| Ratio| Externa l
Clock| JP10 1-2| JP10 3-4| JP10 5-6| JP10 7-8|
JP10 9-10
---|---|---|---|---|---|---|---|---
Intel Celeron| 300MHz| 4.5x| 66MHz| Open| Close| Open| Close| Close
Intel Celeron| 333MHz| 5.0x| 66MHz| Open| Open| Close| Close| Close
Intel Celeron| 366MHz| 5.5x| 66MHz| Open| Open| Open| Close| Close
Intel Celeron| 400Mhz| 6.0x| 66MHz| Close| Close| Close| Open| Close
Intel Celeron| 433Mhz| 6.5x| 66MHz| Close| Close| Open| Open| Close
Intel Celeron| 466MHz| 7.0x| 66MHz| Close| Open| Close| Open| Close
Intel Celeron| 500Mhz| 7.5x| 66MHz| Close| Open| Open| Open| Close
(Remark: All Intel CPU will defect jumper setting automatically)
- M-System Disk On Chip: JP14, JP15
| JP14 | JP15 | USER ADDRESS |
|---|---|---|
| 1-2 | 1-2 | 0C800-0C9FF |
| 1-2 | 3-4 | 0CC00-0CDFF |
| 3-4 | 1-2 | 0D000-0D1FF |
| 3-4 | 3-4 | 0D400-0D5FF |
| 5-6 | 1-2 | 0D800-0D9FF |
| 6-5 | 3-4 | 0DC00-0DDFF |
- CMOS Operation mode: J11
| Function | J11 |
|---|---|
| CMOS Normal | 2-3 |
| CMOS Reset | 1-2 |
- ATX / AT power mode: JP11, J12
| Function | JP11 | J12 |
|---|---|---|
| Use FT-8005C AT external power supply (default) | Close | 2-3 |
| --- | --- | --- |
| Use FT-8006 ATX external power supply | Open | 1-2 |
Printed in Taiwan 2000
Documents / Resources
|
Retro Web B62 Main
Board
[pdf] User Manual
482B6203, B62 Main Board, B62, Main Board
---|---