Inwa MZ-518 Mini Retro Speaker User Manual

Inwa MZ-518 Mini Retro Speaker User Manual

Thank you for purchasing this product.
Before using this product, please read all safety information and operating instructions.

Safety Instructions

• Read all instructions and save them for future reference.
• Please follow all instructions for product operation.
• Do not use near heat sources. Avoid radiators, stoves, and other devices that generate heat. Avoid long-term exposure to sunlight and high temperature.
• This speaker has 2 modes: Bluetooth mode and audio mode.
• Note: If the speaker is not connected for 3 minutes after turning on the power, the speaker will power off.To restart the speaker, press power on/off.

Packing list

• Speaker * 1

• USB data cable * 1 (0.6m/23.62in)

• 3.5mm audio cable * 1 (1m/39.37in)

Product Size

Product Parameter

Play time

|

8hr-12hr

---|---

Frequency response

| 20HZ-20KHZ
Bluetooth range|

15m

Rated voltage

| 3.7V
Rated power|

5W

Battery capacity

| 1500mAh
Bluetooth version|

5.0

Net weight

| 260g(With battery)
Product size|

128×60×94mm

Product Description

1. Power on/off/play/pause/volume up/down:
   Long press the button to turn on/off the speaker;
   Short press the button to play/pause music in Bluetooth mode;
   Turn the button clockwise to increase the volume, or turn the button counterclockwise to decrease the volume

2. Next: Switch to the next song (only available for Bluetooth Mode).

3. **Mode/pairing:
   Short press this button to change the music mode;
   In Bluetooth mode, press and hold the button for 2 seconds to disconnect from the current device and enter the state of waiting for pairing.
   **

4. Previous: Switch to the previous song (only available for Bluetooth Mode).

5. Power indicator: If Bluetooth is connected successfully, it will be on for a long time, the Bluetooth playing status will be slow flashing, the status of linking back and pairing will be fast flashing, and the status of aux will be slow flashing.

6. AUX input

7. Power interface: DC 5V 1A

Instructions

• Step 1
  Press and hold the power button for 2 seconds, and you will hear a boot tone.
  After turning on, the power indicator flashes quickly, indicating that the speaker has entered Bluetooth pairing mode.
  Note: When the speaker is connected with line in cable, the speaker will automatically enter AUX mode after powering ON. Press Mode button shortly to enter Bluetooth Mode.
  

• Step 2
  Press the mode/pairing button for 2 seconds to disconnect the current connection, and then enter the pairing mode again, the indicator light will also flash.
  

• Step 3
  Search for the Bluetooth device “A SPEAKER05” on the phone, and then tap the device to pair the speaker with the phone.
  

• Step 4
  After the pairing is complete, there will be a beep and the power indicator (blue light) will be on.

• Step 5
  When playing music, the power indicator (blue light) flashes slowly.

Automatically Connect Back

After turning on the speaker, it will automatically reconnect to the last paired device. If the speaker is not connected after turning on the power, the speaker will automatically turn off after 3 minutes.

AUX Mode

1. Insert the 3.5mm audio cable into AUX mode, or short press the mode/pairing button to switch AUX mode.
   

2. In AUX mode, the power indicator (blue light) flashes slowly
   

Indicator Light Description

1. Connection indicator:
   If the speaker is ready to pair, the power indicator (blue light) flashes quickly.
   
   BT mode:
   The speaker is ready to connect.
   If the speaker is playing music, the power indicator (blue light) flashes slowly.
   

2. Charging indicator:
   If the battery is low, the power indicator (red light) flashes slowly, and the speaker will also sound an alarm.
   
   Alert when battery is low

The red power indicator will stay on during the charging process, and will go out automatically when fully charged.

• Charging
  

• finished charging
  

Solutions To Common Problems

1. Check whether the product is in search state or restart.
2. There are too many Bluetooth devices around, which makes it difficult to search. Turn off other Bluetooth devices.

Low or distorted sound|

1. Check the volume of Bluetooth device and adjust the volume to a proper position.
2. Please charge if the battery voltage is low.

Music breaks| Whether it is beyond the effective connection distance of the audio, or there is an obstacle between the speaker and the Bluetooth device.
Bluetooth status indicator is not on|

1. The battery is low. Please fill it up and try again.
2. There are too many Bluetooth devices around, which makes it difficult to search. Turn off other Bluetooth devices.
3. Check whether the product is in search state or restart.

Tips:
In order to help prolong the service life of the speaker and your physical and mental health, please do not listen in a long-term high-volume environment to avoid damage to your hearing.

Warranty Card

Model: ____
Date of purchase:
Distributor: ____
Name: _
TEL: __
E-mail: ____
ADD: _

Warranty Records

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>