UGREEN CM309 Car Bluetooth Audio Receiver User Manual

: June 6, 2024
: UGREEN

UGREEN CM309 Car Bluetooth Audio Receiver User Manual

Preface

Thank you for purchasing the UGREEN products. For optimum operation, please read this manual carefully before use.

Features

Bluetooth 5.0: provides stable audio transmit performance.
Multifunction: connects to USB port or AUX jack, uses in your car or pairs with the speaker,
Dual Link Connectivity: driver-free, it can pair with two devices simultaneously.
Convenience: plug and play, auto-reconnection when power on

USB 2,0 Plug 8Mic
LED Indicator Light
3.5 mm Audio ln1erface

How it Works

Bluetooth Pairing

For the first use, please insert this unit into USB port and AUX jack in the car after starting the car, this unit will power on automatically, and enter pairing state.
Open the Bluetooth settings, search “Ugreen-70601” and click, then you will hear the sound “Connected”.
For subsequence use, this unit will auto-paired with your car audio after starting your car and opening the Bluetooth setting on your phone.

Tips

In pairing state, please follow the steps below if failed to paired within 5min: After starting your car, unplug this uni1 from your car ports and plug it again. Then res1art the Bluetooth settings on your phone to pair with this unit.
Please keep this unit into the transmit range of 10m/32ft.

Disconnect

For phone: in paired state, turn off the Bluetooth of your phone, or exceed the transmit range.
For car: close your car.

Dual Link Connectivity ( connect two mobile phones simultaneously)

Paired with phone A, then turn off A’s Bluetooth.
Paired with phone B.
Open A’s Bluetooth, and it will reconnect to this unit automatically.
Connected phone A & B simultaneously.

Reconnection

After power on this unit, it will connect to the last Bluetooth device automatically.

Indicator Lights Status

When wor~ng, the status of LED indicator light are as tonows.

Indicator Lights Status

When wor~ng, the status of LED indicator light are as tonows.

Notes

Compliant with BOB and SRRC Certifications.
Please unplug this unit in time.
DO NOT place this unit in direct sunlight.
DO NOT expose to liquids, moisture or extreme temperatures.
DO NOT clean this unit wi1h strong chemicals or detergents.
Please store this unit in dry, clean and equable environments if you will not use this unit for a long time.
Keep out of reach of children.

Warnings

DO NOT dismantle, impact or crush.
DO NOT use around magrets or with strong magnetic fields.

Package Contents

1 x Bluetooth Car Receiver Aux
1 x User Manual
1 x Warranty Card
1 x Certificate

Please contact us directly if you have any questions.
Thanks for your support!

FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

English: “

This device complies with Industry Canada licence-exempt RSS standard(
s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.”