The Retro Web Standard Microsystem ETHERNET 3016 Network Interface Card Instructions
- August 6, 2024
- The Retro Web
Table of Contents
Standard Microsystem ETHERNET 3016 Network Interface Card
Specifications
- NIC Type: Ethernet 3016
- Transfer Rate: 10Mbps
- Data Bus: 16-bit ISA
- Topology: Linear Bus
- Wiring Type: RG-58A/U 50ohm coaxial
- Boot ROM: Available
Product Usage Instructions
Jumper Settings:
Refer to the jumper settings on SW1 and SW2 for configuring the NIC:
- SW1/1: On, On, Off, On, Off, On, Off, On, Off, Off, On, Off, On, Off, On, Off
- SW1/2: On, On, On, Off, Off, On, On, Off, Off, On, Off, Off, v On, On, Off, Off
Boot ROM Address:
Configure the Boot ROM address using SW2/1 – SW2/8: SW2/1: On, On, Off, On,
Off, Off, On, Off
Data Bus Size:
Set the data bus size using jumper settings JP1A-D: JP1A: Open, Closed
Pulse Transformer T1:
Ensure to check if Pulse Transformer T1 is installed as per JP5 setting.
JP5: Closed (installed), Open (not installed)
FAQ :
Q: How do I know if the Boot ROM is enabled?
A: Check the jumper settings on SW1/8. If it is set to ‘On’, the Boot ROM
is enabled.
THE NETWORK INTERFACE CARD TECHNICAL GUIDE
STANDARD MICROSYSTEMS CORPORATION E T H E R N E T 3 0 1 6
- NIC Type Ethernet
- Transfer Rate 10Mbps
- Data Bus 16-bit ISA
- Topology Linear Bus
- Wiring Type RG-58A/U 50ohm coaxial
- AUI transceiver via DB-15 port
- Boot ROM Available
| I/O BASE ADDRESS|
---|---|---
Address| SW1/1| SW1/2| SW1/3| SW1/4| SW1/5| SW1/6| SW1/7
í300h| On| On| On| Off| Off| On| On
200h| On| On| On| On| Off| On| On
220h| Off| On| On| On| Off| On| On
240h| On| Off| On| On| Off| On| On
260h| Off| Off| On| On| Off| On| On
280h| On| On| Off| On| Off| On| On
2A0h| Off| On| Off| On| Off| On| On
2C0h| On| Off| Off| On| Off| On| On
2E0h| Off| Off| Off| On| Off| On| On
320h| Off| On| On| Off| Off| On| On
340h| On| Off| On| Off| Off| On| On
360h| Off| Off| On| Off| Off| On| On
380h| On| On| Off| Off| Off| On| On
3A0h| Off| On| Off| Off| Off| On| On
3C0h| On| Off| Off| Off| Off| On| On
3E0h| Off| Off| Off| Off| Off| On| On
| BOOT ROM|
---|---|---
Setting
SW1/8
íDisabled| Off
Enabled| On
| BOOT ROM ADDRESS|
---|---|---
Address| SW2/1| SW2/2| SW2/3| SW2/4| SW2/5| SW2/6
íD0000h| On| On| Off| On| Off| Off
C0000h| On| On| On| On| Off| Off
C4000h| Off| On| On| On| Off| Off
C8000h| On| Off| On| On| Off| Off
CC000h| Off| Off| On| On| Off| Off
D4000h| Off| On| Off| On| Off| Off
D8000h| On| Off| Off| On| Off| Off
DC000h| Off| Off| Off| On| Off| Off
E0000h| On| On| On| Off| Off| Off
E4000h| Off| On| On| Off| Off| Off
E8000h| On| Off| On| Off| Off| Off
EC000h| Off| Off| On| Off| Off| Off
| DATA BUS SIZE|
---|---|---
Size| JP1A| JP1B| JP1C| JP1D| JP5| SW2/7| SW2/8
16-bit| Open| Open| Closed| Closed| Closed| Off| On
8-bit| Closed| Closed| Open| Open| Open| On| On
| CABLE TYPE|
---|---|---
Type JP2 JP4
Pulse Transformer T1
íRG-58A/U 50ohm coaxial| Open| Open| installed
AUI transceiver via DB-15 port| Open| Closed| not installed
| INTERRUPT REQUEST|
---|---|---
IRQ| JP7A| JP7B| JP7C| JP7D| JP7E| JP7F
í3| Closed| Open| Open| Open| Open| Open
4| Open| Closed| Open| Open| Open| Open
5| Open| Open| Closed| Open| Open| Open
7| Open| Open| Open| Closed| Open| Open
9| Open| Open| Open| Open| Closed| Open
10| Open| Open| Open| Open| Open| Closed