Chargeknight HZPY0018 Smart USB Charging Station User Manual

Chargeknight HZPY0018 Smart USB Charging Station User Manual

Smart USB Charging Station User Manual

1. USB Charging Port (6 ports)
2. 4.9tvl.Sm Power Cord
3. ON/OFF

How to Use

Step 1: Plug the power cord tail into the smart USS charging station, and keep it connected.

Step 2: Plug the power cord head into the power strip or wall socket.
Tip : If the indicator is not lighting, please check whether all the power connections are good or not.

Step 3 : Connect the devices to the charging station by USB cables until the devices are charged. Leave the devices between 2 baffles.

Step 4: Unplug the charging station from the power strip or wall socket after all the devices are fully charged.

Attentions

1. Please read the user manual before using.
2. The original charging cables or JZBRAIN offered cables are strongly recommended in case your devices are damaged by the poor cables.
3. Do not open or fix the charging station.
4. Do not use the charging station when the short circuit occurs.
5. Keep the charging station away from children, fire. liquid, heat dust and wet.
6. Do not drop or beat.

Warranty

This charging station is offered 12-month warranty but not valid in the cases as below:

1. Dropped by carelessness.
2. The liquid flooded into the charging station.
3. Damaged by outside heating source.
4. Dust stacked.
5. The appearance was damaged by anthropic factor.
6. Damaged by natural disaster, such as flood, fire, lightening, earthquake and so on.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>