PawHut D08-015 Stainless Steel Pet Feeder Instruction Manual
- September 3, 2024
- PawHut
Table of Contents
PawHut D08-015 Stainless Steel Pet Feeder
IMPORTANT , RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Tools Recommended
IF HAVE THIS ACCESSORY
- QUICKFIT : Tighten quickfit until the shoulder is flush with the panel. Do not overtighten or undertighten.
- CAM LOCK : When fitting the cam lock, ensure the starting position is correct before you insert the connecting quickfit.
- Quickfit head should be in the center of the cam lock when the two panels are joined.
- The Cam lock should be inserted before quickfit.
- Turn the cam lock clockwise to tighten.
PARTS
HARDWARE
INSTALLATION
If you have any questions, please contact our customer care center.
Our contact details are below :
001-877-644-9366
customerservice@aosom.com
Imported by Aosom LLC 27150 SW Kinsman Rd Wilsonville, OR 97070 USA ‘ MADE IN
CHINA
If you have any questions, please contact our ; customer care center.
Our contact details are below:
Nos coordonnées sont les suivantes:
416-792-6088
customerservice@aosom.ca
Imported by Aosom Canada Inc. 7270 Woodbine Avenue, Unit 307, Markham,
Ontario Canada L3R 4B9
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>