LUXPRO LP369 750 Lumen LED Lantern User Manual
- June 5, 2024
- LUXPRO
Table of Contents
LUXPRO LP369 750 Lumen LED Lantern
Features
- Rugged rubber design
- BROADBEAM surface LED technology
- Protective rubberized armor, rugged rubber ends
- Rubberized metal handle
- Variable on/off brightness dial
- O-ring sealed, weather-resistant
Operation Instructions
- On/Off: Turn variable dial clockwise. Audible click when turned on, or off.
- Adjusting brightness: Rotate variable dial clockwise to increase brightness, and counter-clockwise to decrease brightness.
- Battery indicator Lights: Located below the variable power dial. Green LED’s
- indicate battery level: 4 = full power, 3 = 75%, 2 = 50%, 1 = 25%. Replace batteries at this point to avoid complete loss of useability.
Usage and Maintenance
Battery Replacement: In a dry environment, unscrew the base by turning counter-clockwise. Remove batteries. Insert the new batteries into the slots following the +/- symbols. Carefully reinstall the base by pressing lightly while turning clockwise. Care Instructions: If you know it’s going to be a while between uses, we suggest removing batteries from your light and storing your gear in a dry, protected place.
Product Warranty
Limited 90-Day Warranty against manufacturer’s defects from time of purchase. For warranty claims contact LuxPro by calling 801-553-8886 or sending an email to info@simpleproducts.com.
ANSI/PLATO FL1 STANDARD
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>