Coolado ePump X Cordless High Pressure Smart Tire Pump User Manual

: September 4, 2024
: coolado

Table of Contents

BOX CONTENTS
PRODUCT DESCRIPTION
INFLATING / DEFLATING FUNCTION
OTHER APPLICATIONS
SWITCHING ON/OFF
CHARGING
LED LIGHT INDICATOR
BASIC PARAMETERS
SAFETY INSTRUCTIONS
WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

E·PUMP X USER MANUAL
CORDLESS HIGH-PRESSURE SMART TIRE PUMP

Thank you for purchasing the Coolado ePump X!
Discover the endless usages of this little device and share your experience on our website: www.coolado.com

http://l.ead.me/bamMpw

BOX CONTENTS

ePump X|
---|---
2 Nozzles| The 2 Nozzles that can be used on both the inﬂating as well as on the deﬂating ports.
USB-C cable|

PRODUCT DESCRIPTION

Fully charge the Coolado ePump X before the ﬁrst use

Deﬂating port
Inﬂating port
On/Off button
LED battery status indicator
Micro-USB port for charging

INFLATING / DEFLATING FUNCTION

According to the usage scenario, it can be used directly or with a nozzle atached to the pomp!
Inﬂation

Choose the appropriate nozzle and connect it to the inﬂating port
Switch on the Coolado ePump X and start inﬂating.

Deﬂation

Choose the appropriate nozzle and connect it to the deﬂating port
Switch on the Coolado ePump X and start deﬂating.

OTHER APPLICATIONS

You can also use the Coolado ePump X
– to ignite your BBQ
– as an air dryer (without heat)

SWITCHING ON/OFF

Long press the power button to turn the pump on and off
In the startup state when power is on, press the power button one by one to cycle through the 3 air speed modes – slow/faster/fastest – by pressing the button brieﬂy each time.
CAUTION: Blocking air ports can lead to engine rupture.

CHARGING

The Coolado ePump X comes with a standard micro USB-C cable. In order to save the environment, we don’t supply a charger. A 5V mobile phone charger could be used (after checking the voltage)

Connect the Micro USB-C cable to the USB port of the ePump X.
Connect the USB cable to the charger.
Plug the charger into the wall socket.
The ePump X will show a ﬂashing red light when it is charging.
When the ePump X is fully charged the light will turn green.

CAUTION:

Each ePump X has a built-in non-removable lithium battery.
Do not throw it into ﬁre or dispose of it carelessly.
Overheating, shock and water ingress may cause the lithium battery to catch ﬁre, spontaneous combustion or explosion.
The ePump X should be stored in a cool, clean and dry place. The storage temperature of the product should not be lower than -10°C or higher than 45°C. Heat or cold will shorten the life of the product and damage the built-in battery.
The ePump X battery must be recharged within seven days if it is dead. It may become damaged if not used for a long time. It is recommended that you charge the ePump X immediately after purchase and then charge it at least once every six months, even when not in use.

LED LIGHT INDICATOR

Turbine Fan Status	Indicator Light Status
At Work	Sufﬁcient Battery
Low Battery	Indicator Light On Red

During
Charging| Charging| Indicator Light On/Red Light Flashing
Fully Charged| Indicator Light On Green

BASIC PARAMETERS

Product Name: ePump X
Motor: Brushless
Battery capacity: 1100mAh
Rated Power: 120W
Working Voltage: DC 11.1V-12.8V
INPUT: 5V – 2A
Interface Type: Type-C
Net weight of product: approximately 0.25kg
Product Size: 42 14072mm
Charging Duration: 3:30 Hours

SAFETY INSTRUCTIONS

To avoid accidental injuries such as electric shock and ﬁre caused by improper use, please read this instruction carefully before using the product.
USAGE RESTRICTIONS

This product contains a built-in rechargeable battery. Do not put it into ﬁre or heat it, and do not charge it under high temperature conditions
Avoid direct sunlight when using, placing, and inside the vehicle, as it may cause overheating, ignition, or explosion.
It is recommended to use it in an environment between 0 °C and 40 °C.
Do not allow children to come into contact, play, use, or maintain this product.
Do not use this product with wet hands to prevent injury.
Do not use it to absorb any liquids (such as water, cola, etc.) and hard or sharp objects (such as glass, nails, etc.).
Do not use it to absorb any burning or smoking objects (such as unlit cigarette butts).
Flammability may cause the product to catch ﬁre.
Please use this product according to the instructions in the manual. Any losses caused by improper use shall be borne by the user.

BATTERY AND CHARGING

Do not disassemble, repair, or modify the battery without authorization.
Do not charge near heat sources or damp areas (such as radiators or bathrooms).
Do not use a damp cloth or wet hands to wipe and clean products during charging.
If the charging wire is damaged or broken, please stop using it immediately.
If you do not use this product for a long time, please fully charge it, unplug the charging cable, and place it in a cool and dry place, at least every 6 months

WARRANTY

The Coolado warranty is in accordance with the EU law and regulations The Coolado ePump X has a limited warranty of 24 months after the date of purchase.
Damages to the Coolado caused by abuse, abnormal operation, water damage, non- advised power supply, are not included in the warranty. The liability of Coolado will ALWAYS be limited to the value of the ePump X and coolado is not liable for damages to persons and/or property.