TESLA 360 Pro Smart Camera User Manual

TESLA 360 Pro Smart Camera

Specifications

• Brand: Tesla
• Model: Smart Camera 360 Pro
• IR light
• Status light
• Microphone
• SD card slot (Max. 128GB)
• Reset button
• Speaker
• USB-C port
• Power Status light
• WiFi: 2.4GHz (not compatible with 5GHz)

Product Usage Instructions

Installation
Use the included mounting bracket to fix the camera to a clean surface or simply place it on a flat surface.

Connecting to WiFi

• Download the Tesla Smart App from the App Store or Android Market.
• Ensure your router is set to 2.4GHz WiFi and record the SSID and password before connecting.

Registration Process

• Open the Tesla Smart App and register by providing a valid mobile number or email address.
• Input the verification code received to log in to the app.

QR Code Configuration

• Customize Family settings in the app and add the camera as a device.
• Ensure the camera is connected to a 2.4GHz WiFi network by scanning the QR code in the app.

Settings

• In the Smart Camera interface, you can set common functions and customize camera settings.

FAQ

• Q: The device cannot be previewed properly?
  A: Check network connection, move camera closer to the router, or reset and re-add the device.

• Q: Why is it still in the list of devices after resetting?
  A: Resetting only clears network settings; remove and re-add the camera in the app to update configurations.

• Q: How to connect the camera to another router?
  A: Remove and reset the device in the app, then reconfigure it with the new router settings.

• Q: Why doesn’t the device identify the SD card?
  A: Ensure SD card is inserted correctly after power cut, format is FAT32, and internet connection is stable.

• Q: Why am I not receiving notifications on my phone?
  A: Ensure the app is running on your phone, notification settings are enabled, and relevant permissions are granted in your phone’s system settings.

TESLA
SMART CAMERA 360 PRO
USER MANUAL

IN THE BOX

• Tesla Smart Camera 360 Pro
• Power adapter
• USB-C cable
• Bracket
• Screws
• User manual

Blinking red light: awaiting WiFi connection (slow blinking) connecting to WiFi (fast blinking) Blue light solid on: camera running correctly
Microphone| Captures sound for your video
SD card slot| Supports local SD Card storage (Max.128GB)
Reset| Press and hold for 5 seconds to reset the camera (if you have modified settings, they will return to factory defaults)

INSTALL

1 Use the included mounting bracket to fix the camera to a clean surface.

2
Or, put the camera on a flat surface.

CONNECT

Download
Tesla Smart is available for both iOS and Android OS. Search the name ‚Tesla Smart‘ in App Store or Android Market, or scan the QR-Code to download the App.

SET UP ROUTER
The router supports the 2.4GHz WiFi (doesn‘t support the 5GHz), and is connected to the WiFi network.Please set the parameters of the router before connecting the WiFi network, and record the SSID and password of your WiFi. Please keep network available

REGISTRATION PROCESS

Step 1 Open the Tesla Smart App, click „Register“, read the „Privacy Policy“ and click „Agree“ .
Step 2 Input a legal and valid Mobile number or Email address and click „Continue“. Input Verification Code, then log in the app.

QR CODE CONFIGURATION

1. Open the Tesla Smart App, click „Create family“, and you can custo-mize the Family name and related settings.
2. Continue to click „Security & Sensor“ >> „Smart Camera“, and then choose“ Add Device“ or „+“, ready to add camera.
3. In „Add Device“ this interface,continue to click „next step“, and then you should input your WiFi‘s passwords. Note: 1) Camera only supports 2.4GHz WiFi network. 2) The number of bits in the ssid and passwords of the router should not exceed 24 digits.
4. In this interface, you should scan the QR code in your phone with the camera, when the camera comes out „dong dong dong“. And you can complete the configuration about 30s.
5. When connecting, you should make sure your router, mobile,and camera are as close as possible. When camera added successfully, click „ „ you could also DIY the camera‘s name.

SETTINGS

In „Smart Camera“ interface,click „ „,you can set the camera common functions.

FAQ

• Q: The device cannot be previewed properly?
  A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again.

• Q: Why is it still in the list of devices after reseting?
  A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.

• Q: How to cut the camera network to another router?
  A: First remove and reset the device on the App and then configure the device again by the App.

• Q: Why doesn‘t the device identify the SD card?
  A: It is recommended to plug in SD card after power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can’t be identified when the internet environment is not good.

• Q: Why I can’t get the notifications with my cell phone App?
  A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened;Message notification and authority confirmation in the mobile phone system have been opened.

FUNCTIONS

• Pan/Tilt
  Rotate your camera by sliding on your smartphone, providing you with 360 degrees of vision.

• Video flip
  Flip your video stream up or down for maximum flexibility.

• Motion detection
  Built-in motion sensors detect movement, and the camera will send you push notifications and app alerts.

• Record
  Support 24H continuous recording with high capacity SD storage or Cloud storage.

• Day & Night
  Never miss a moment, even in complete darkness, with powerful night-vision technology.

TECHNICAL SPECIFICATION

INFORMATION ABOUT DISPOSAL  AND RECYCLING
This product is marked with the symbol for separate collection. The product must be disposed of in accordance with the regulations for disposal of electrical and electronic equipment (Directive 2012/19/EU on waste electrical and electronic equipment). Disposal together with regular municipal waste is prohibited. Dispose of all electrical and electronic products in accordance with all local and European regulations at the designated collection points which hold the appropriate authorisation and certification in line with the local and legislative regulations. Correct disposal and recycling help to minimise impacts on the environment and human health. Further information regarding disposal can be obtained from the vendor, authorised service centre or local authorities.

EU DECLARATION OF CONFORMITY
Hereby, TESLA Solar s.r.o. declares that the radio equipment type TSL-CAM- SPEED17S is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: tsl.sh/doc

• Connectivity: Wi-Fi 2,4 GHz IEEE 802.11b/g/n
• Frequency band: 2.412 – 2.472 GHz
• Max. radio-frequency power (EIRP): < 20 dBm

Manufacturer

• TESLA Solar s.r.o.
• Rubeska 215/1
• 19000 Prague
• Czech Republic
• www.teslasmart.com

TESLA
SMART CAMERA 360 PRO

References

• Sign in to your account
• TESLA | Smart home in your hands

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>