IOGEAR GC72CC 2-Port 4K USB-C KVM Switch with DisplayPort output User Manual
- June 3, 2024
- Iogear
Table of Contents
GC72CC 2-Port 4K USB-C KVM Switch with DisplayPort output
User Manual
GC72CC 2-Port 4K USB-C KVM Switch with DisplayPort output
Quick Start Guide
2-Port 4K USB-C'” KVM Switch with DisplayPort Output
GC 572GC PART NO. Oi 70T
www.iogear.com
Package Contents
1 x GCS72CC
1 x Quick Start Guide
1 x Warranty Card
System Requirements
Console:
- DisplayPort monitor
- Standard wired USB keyboard
- Standard 3-button wired USB mouse
Computer:
- USB Type-C port
Operating Systems:
- Windowss 7, 8.1, 10, 11
- Mac OSs 9.0+
- Linue, UNIX0 and other USB supported systems
Overview
- Port LEDs
- USB port for keyboard and mouse
- DisplayPort for monitor
- KVM Cable — USB-C
- Remote port switch button
Hardware Installation
Step 1 Console section: Connect to keyboard, mouse, DisplayPort monitor
Step 2 Computer section: Connect to the USB Type-C computers with USB-C
cables
Limited Warranty
This product carries a limited or lifetime manufacturer’s warranty. For terms
and conditions visit https://www.iogearcom/support/warranty.
Register online at https://www.iogearcom/register
Important Product Information Product Model Serial Number
Contact
WE’RE HERE TO HELP YOU!
NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:
- Visit www.iogear.com for more product information
- Visit www.iogear.com/support for live help and product support
IOGEAR
iogear.custhelp.com
support@iogear.com
www.iogear.com
EMC Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital service, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. Any changes or modifications made to this equipment
may void the user’s authority to operate this equipment. This equipment
generates, uses, and can radiate radio frequency energy. If not installed and
used in accordance with the instructions. may cause harmful interference to
radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on. the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna
– Increase the separation between the equipment and receiver
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
– Consult the dealer or an experienced radio/TV technician for help
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CE Statement:
This device has been tested and found to comply with the following European
Union directives: Electromagnetic Capability (2014/30/EU) and Low Voltage
(2006/95/EC).
0 2022 IOGEAR 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>