IOGEAR GCS92HU 2-Port USB 4K Cable KVM Switch User Guide
- June 4, 2024
- Iogear
Table of Contents
IOGEAR GCS92HU 2-Port USB 4K Cable KVM Switch
Package Contents
- 1 x GCS92HU
- 1x Quick Start Guide
- 1 x Warranty Card
System Requirements
Console
- HDMI monitor
- Standard wired USB keyboard
- Standard 3-button wired USB mouse
- Speakers and microphones (optional)
Computer:
- HDMI output port
- USB Type-A port
- Audio ports (optional)
Operating Systems:
- Windows® 7, 8.1,10+
- Mac Os 9+
- Linux, UNIX, and other USB supported systems
Overview
- Port LEDs
- USB port for keyboard and mouse
- HDMI port for monitor
- 3.5mm audio input port
- 3.5mm audio output port
- Micro USB power port**
- Remote port switch button
- KVM Cables – HDMI
- KVM Cables – USB
- KVM Cables – Speaker
- KVM Cables – Microphone
The USB-A ports on the KVM can also be used for peripheral sharing. To utilize
this feature, plug the peripherals, your keyboard, and mouse into a USB hub,
then plug the hub in the USB-A slots on the KVM. (Optional) lf the USB
peripherals used in the setup require more power, attach a power source (i.e.
PC, USB hub, or DC 5V USB power adapter) to the power port on the KVM using a
USB Micro-B cable.
Note: USB Micro-B cable not included. Please contact your IOGEAR dealer
for more information.
Hardware Installation
-
Step 1
Console section: Connecting to microphone, speakers, keyboard, mouse, HDMI monitor -
Step 2
Computer section: 2 HDMI computers (with the HDMI, USB,and audio cables connected)
Limited Warranty
This product carries a 3 Year Limited or Lifetime Warranty. For the terms and
conditions of this warranty, please go to
https://www.iogear.com/support/warranty Register online at
https://www.iogear.com/register
Important Product Information
- Product Model.
- Serial Number
Contact
WE’RE HERE TO HELP YOU!
NEED ASSISTANCE
- Visit www.iogear.com for more product information
- Visit www.iogear.com/support for live help and product support
IOGEAR
iogear.custhelp.com
support@iogear.com
www.iogear.com
EMC Information
FEDERAL COMMUNICATIONS COMMISSION STATEMENT:
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
Warning: Operation of this equipment in a residential environment could
cause radio interference. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
CE Statement
This device has been tested and found to comply with the following European
Union directives: Electromagnetic Capability (2014/30/EU) and Low Voltage
(2006/95/EC).
WARNING: This product may expose you to chemicals including Cadmium which
is known to the State of California to cause cancer, birth defects or other
reproductive harm. For more information, go to
www.P65Warnings.ca.gov
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>