IOGEAR GCS1212TAA4 PP4.0 Secure KVM Remote Port Selector User Guide
- June 4, 2024
- Iogear
Table of Contents
IOGEAR GCS1212TAA4 PP4.0 Secure KVM Remote Port Selector
Package Content
- 1 xGXRMSW01
- 1 x Quick Start Guide
- 1 x Warranty Card
System Requirements
IOGEAR PP4.0 Secure KVM
- GCS1212TM4, GCS1214TM4, GCS1218TM4,
- GCS1222TM4, GCS1224TM4, GCS1228TM4,
- GCS1312TM4, GCS1314TM4, GCS1322TM4,
- GCS1324TM4, GCS1412TM4, GCS1414TM4,
- GCS1418TM4, GCS1422TM4, GCS1424TM4,
- GCS1428TM4, GCS1212TM4C, GCS1214TM4C,
- GCS1218TM4C, GCS1222TM4C, GCS1224TM4C
- GCS1228TM4C, GCS1312TM4C, GCS1314TM4C,
- GCS1322TM4C, GCS1324TM4C, GCS1412TM4C,
- GCS1414TM4C, GCS1418TM4C, GCS1422TM4C,
- GCS1424TM4C, GCS1428TM4C
Overview
Hardware Installation
Connect the cable on the GXRMSW01 to IOGEAR PP4.0 Secure KVM RPS port.
Notes:
- Connect GXRMSW01 before IOGEAR PP4.0 Secure KVM is power on
- Any connection of GXRMSW01 after IOGEAR Secure KVM is powered on will not be detected by the KVM
- When attached to a 2-Port Secure KVM Switch, only pushbuttons numbered 1 and 2 will be detected and functional
When attached to a 4-Port I Secure KVM Switch, only pushbuttons numbered 1, 2, 3 and 4 will be detected and functional
When attached to an 8- Port Secure KVM Switch, eight pushbuttons will be detected and functional
Warning – If a mechanical intrusion is detected by the RPS (connected with the switch and aligned), this will permanently disable both the RPS itself and the switch and all LEDs (on RPS) and the front panel LEDs except the Power LED (on switch) will flash continuously.
Limited Warranty
This product carries a 3-year limited or lifetime warranty. For the terms and
conditions of this warranty, please go to
https://www.iogear.com/support/warranty
Register online at https://www.iogear.com/register
Important Product Information
Product Model———
Serial Number ____ _
Contact
WE’RE HERE TO HELP YOU!
NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:
- Visit www.iogear.com for more product information
- Visit www.iogear.com/support for live help and product support
IOGEAR
iogear.custhelp.com
support@iogear.com
www.iogear.com
EMC Information
FEDERAL COMMUNICATIONS COMMISSION STATEMENT:
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at their own expense.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Warning: Operation of this equipment in a residential environment could cause radio interference.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference and
- this device must accept any interference received, including interference that may cause undesired operation.
CE Statement
This device has been tested and found to comply with the following European
Union directives: Electromagnetic Capability (2014/30/EU) and Low Voltage
(2006/95/EC).
WARNING: This product may expose you to chemicals including Cadmium which
is known to the State of California to cause cancer, birth defects or other
reproductive harm. For more information, go to
www.P65Warnings.ca.gov
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>