IOGEAR HVER™ PRO X RGB Optical Mechanical Keyboard User Guide
- June 6, 2024
- Iogear
Table of Contents
Quick Start Guide
HVER™ PRO X
RGB Optical Mechanical Keyboard
GKB730
PART NO. Q1506
Welcome to Kaliber Gaming
Congratulations! You are now officially a new owner of Kaliber Gaming’s HVER™ PRO X RGB Optical Mechanical Keyboard. Designed for gamers, HVER PRO X offers an array of functions that will increase your gaming skills. You can customize your HVER PRO by choosing from the assortment of pre-programmed color patterns, or download the HVER PRO X user interface software and fine-tune the multi-zone RGB backlighting to match your PC, mouse, and other devices. The HVER PRO X software also allows you to create custom macros and change the bindings of up to 65 different keys, then store them along with your favorite RGB backlight setting to one of three programmable user profile slots. Make sure to read through the full list of features, and take your time following through the operational guidelines in order to get the maximum enjoyment out of your new HVER PRO X!
Package Contents
1 x HVER™ PRO X
1 x Quick Start Guide
1 x Warranty Card
Requirements
- Windows® 7, Windows® 8, Windows® 8.1, Windows® 10
- USB 2.0 port
Hardware Installation
Simply connect the USB plug of HVER PRO X to an available USB port on your computer. Your operating system will automatically install the device.
Software Installation
The HVER PRO X user interface software allows creating custom macro functions
and specialized hotkeys, as well as fine-tuning the RGB backlighting.
The HVER PRO X user interface software is a free download available on the
IOGEAR website location below: https://www.iogear.com/product/GKB730-BN/
Operation
Keyboard – Front View
- Num Lock LED – turns on when Num Lock key is pressed
- Caps Lock LED – turns on when Caps Lock key is pressed
- Scroll Lock LED – turns on when Scroll Lock key is pressed
- Windows Lock LED – turns on when Fn + is pressed to indicate the
Windows key is disabled
Windows Key Lockout
The Windows key lockout prevents the Windows menu from popping up and
interfering with your game if accidentally pressed while gaming.
Press Fn + key to lock out the Windows menu function. The Windows Lock LED
will light up to confirm the Windows key is locked out Press Fn + again to
unlock the Windows key.
Anti-Ghosting / NKRO
As gaming has exploded in popularity, the term Anti-Ghosting has evolved from
its original meaning to now describe a non-mechanical keyboard’s ability to
accurately detect individual keystrokes when certain combinations of buttons
are pressed. Mechanical keyboards do not suffer this problem, and may instead
have a limit to the total number of buttons that can be pressed
simultaneously.
This limit is expressed as N-Key Rollover (NKRO) where N equals the number of
keys that can be pressed simultaneously. HVER PRO has no limit and features
full NKRO, meaning every keystroke will be detected no matter how many keys
are simultaneously pressed. Now you can play with confidence knowing your
keyboard won’t hold you back!
LED Backlight Functions
The HVER PRO X has 8 built-in backlight modes with 47 different color/pattern
combinations, plus 3 DYI per-key user-programmable lighting modes. The
backlighting can be further customized by issuing the downloadable HVER PRO X
user software. Press Fn + PrtSc to cycle through the 8 different color modes:
Sparkle, Monochrome, Fixed Single-Color, Breathing, Follow, Rainbow Ripple,
Explode, and Wave.
Backlight Color Adjustments
Press Fn + Home or Fn + End to cycle up or down through the 9 color options
available within each backlighting mode: Rainbow, White, Purple, Blue, Cyan,
Green, Yellow, Orange and Red. Note: Sparkle and Monochrome backlight modes do
not have color options available.
Backlight Pattern Adjustments
Press Fn + PgUp to increase brightness
Press Fn + PgDn to decrease brightness
Press Fn + ◄ to shift light flow direction left
Press Fn + ► to shift light flow direction right
Press Fn + + to increase light speed
Press Fn + – to decrease light speed
DIY Custom Lighting
The HVER PRO X has three DIY lighting modes that can be programmed without
using the HVER PRO X user software.
To set the DIY lighting mode:
- Press Fn + F9, Fn + F10 or Fn + F11 to select a DIY backlighting mode.
- Press Fn + Pause to start DIY programming. The 4 status LEDs will begin flashing.
- Press the keys you want to light. Each press will cycle the key color as follows: Off, Red, Green, Blue, Yellow, Purple, Cyan, White.
- Press Fn + Pause to exit and save the setting. The 4 status LEDs will stop flashing.
Note: Change the FN key color last. When changing the Fn key color, cycle to the color you want but do not release the key. Continue holding down the key and press Pause to save, then you can release the key.
Hotkeys
There are 9 hotkeys offering quick access to the most commonly used functions. Press the F key to activate the desired function.
| Windows Hotkeys | Function |
|---|---|
| Fn + F1 | |
| Fn + F2 | |
| Fn + F3 | |
| Fn + F4 | |
| Fn + F5 | |
| Fn + F6 | |
| Fn + F7 | |
| Fn + F8 | |
| Fn + F12 |
HVER PRO X User Software
The following features require installation of the HVER PRO X user interface
software, available as a free download from the IOGEAR website.
Macro Keys
The HVER PRO X keys can be programmed to execute a series of keystrokes with
only a single press. These are great gaming tools for casting spells, etc.
but they can also be used to simplify your life outside of gaming. You can use
programmable buttons for simple text shortcuts like entering passwords or
email addresses, accessing special menus, and executing multi-key commands
when using powerful programs like Photoshop and Solidworks. To create and
store Macro Key functions you will need to download the HVER PRO X user
interface software from the IOGEAR website.
User Profiles
The HVER PRO X can store up to three custom user profiles, each with
differently programmed macro keys and LED backlighting. To create and store
custom user profiles you will need to download the HVER PRO X user interface
software from the IOGEAR website.
Keyboard – Rear View
Foldout Leg (see Foldout Leg Keycap Removal Tool)
Foldout Legs
For greater comfort during long gaming sessions, you can adjust the typing
angle of your HVER PRO X by folding the legs in or out on the back of the
keyboard.
Keycap Removal Tool
The HVER PRO X includes a tool that assists in removing the keycaps for
cleaning, or when exchanging them for a custom set. To remove a keycap, center
the tool over the keycap and press downward until it snaps over the cap. Lift
up with even pressure until the keycap is removed.
Compliance Information
FCC Statement
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential setting. This product generates, uses, and can radiate radio
frequency energy and, if not installed and used as directed, it may cause
harmful interference to radio communications.
CE Compliance
This device has been tested and found to comply with the following European
Union directives: Electromagnetic Capability (2004/108/EC), Low Voltage
(2006/95/EC) and R&TTED (1999/5/EC).
Limited Warranty
WE’RE HERE TO HELP YOU!
NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:
- Visit www.iogear.com for more product information
- Visit www.iogear.com/support for live help and product support
Warranty Information
This product carries a 2 Year Limited Warranty. For the terms and conditions
of
this warranty, please go to https://www.iogear.com/support/warranty
Register online at https://www.iogear.com/register
Important Product Information
Product Model
Serial Number
Contact
IOGEAR
https://iogear.custhelp.com
[email protected]
www.iogear.com
References
- IOGEAR :: HDMI Switch, PC to TV, Wireless Audio Video, KVM Switch, KVM, USB Switch, Video Splitter, Video Switch, KVM DVI, LCD KVM, Rackmount KVM
- Support Home Page
- Support Home Page
- IOGEAR - GKB730-BN - HVER PRO X RGB Optical-Mechanical Keyboard (Brown Switch)
- IOGEAR - GKB730-BN - HVER PRO X RGB Optical-Mechanical Keyboard (Brown Switch)
- Product Registration - IOGEAR
- Warranty - IOGEAR