PDI-254I Backer Plates Instruction Manual

September 29, 2024
PDi

PDI-254I Backer Plates

“`html

Specifications

  • Model Number: PDI-254I & PDI-255E Backer
    Plates PD196-094R6

  • Installation Instructions Page: 1 of 3

  • Stud Centers: 16 (PDI-254I & PDI-255E), 24
    (PDI-255E-24), 16 for AV Kit (PDI-255EAV)

Product Information

This document provides the information to install the different
configurations of the PDi Internal and External Backer Plates. The
Internal Backer Plates are identified with the PDI-254I base part
number, and the External Backer Plates are identified with the
PDI-255E base part number. Each version will have an additional
suffix that will differentiate it from the other configurations.
The plates are marked with an arrow and TOP to indicate proper
mounting orientation.

Safety Instructions

  1. Always wear safety glasses/goggles to prevent injury from
    debris.

  2. Follow the installation/removal instructions for your existing
    products.

Installation Instructions

Internal Backer Plates (PDI-254I)

The 254I plates are for internal mounting, behind the drywall.
They are uncoated. Align the plates with the wall studs, as shown,
to use the slots in the four corners to mount the plate. See the
Mounting Options for information regarding the suggested fasteners
to use to mount the plate.

External Backer Plates (PDI-255E)

The 255E plates are external for mounting on top of the drywall.
They have a powder coated finish on the visible side. Align the
plates with the wall studs, as shown, to use the slots in the four
corners to mount the plate. See the Mounting Options for
information regarding the suggested fasteners to use to mount the
plate.

Mounting Options

For wood studs, the suggested mounting anchors are steel lag
screws for wood, meeting ASME B18.2.1 specifications and coated for
corrosion resistance.

For metal studs, use Hilti Toggler anchors sized for 1/4-20
fasteners with a minimum SAE grade 5 rated bolt. Install per
manufacturer’s instructions.

Warranty Information

PDi Communication Systems Inc., standard warranty information
can be found at pdiarm.com. For authorized servicing and
warranty-related inquiries, contact PDi COMMUNICATION SYSTEMS, INC.
at 40 Greenwood Ln, Springboro, Ohio 45066 or call 800-628-9870 and
ask for the PDi ProServices team.

FAQ

Q: What should I do if I encounter difficulties in aligning the

backer plates with the wall studs?

A: If you face alignment issues, consider
adjusting the position of the backer plates and double-checking the
stud locations. It may also be helpful to use a stud finder tool
for accurate placement.

“`

MODEL NUMBER:

Document Number:

PDI-254I & PDI-255E Backer Plates PD196-094R6

Installation Instructions

Page 1 of 3

INTRODUCTION This document provides the information to install the different configurations of the PDi Internal and External Backer Plates. The Internal Backer Plates are identified with the PDI-254I base part number, and the External Backer Plates are identified with the PDI-255E base part number. Each version will have an additional suffix that will differentiate it from the other configurations. The plates are marked with an arrow and “TOP” to indicate proper mounting orientation.

The standard design for the backer plates is for 16inch spacing for the wall studs. For 24inch spacing, the part
number will include “-24″ as a suffix to the base part number. The standard backer plate designs that these instructions are intended for are listed in the table below.

PDI Base Part No.
PDI-254I PDI-255E PDI-255E-24 PDI-255EAV

Description
Internal Backer Plate External Backer Plate External Backer Plate, 24″ Centers External Backer Plate, 16″ for AV Kit

Stud Centers
16″ 16″ 24″ 16”

SAFETY 1. Always wear safety glasses/goggles to prevent injury from debris. 2. Follow the installation/removal instructions for your existing products.
INSTALLATION The 254I plates are for internal mounting, behind the drywall. They are uncoated. Align the plates with the wall studs, as shown, to use the slots in the four corners to mount the plate. See the Mounting Options for information regarding the suggested fasteners to use to mount the plate.
The 255E plates are external for mounting on top of the drywall. They have a powder coated finish on the visible side. Align the plates with the wall studs, as shown, to use the slots in the four corners to mount the plate. See the Mounting Options for information regarding the suggested fasteners to use to mount the plate.

PDi Communication Systems, Inc. 40 Greenwood Ln Springboro, Ohio 45066 USA www.pdiarm.com and www.mymedTV.com Phone 800.628.9870

MODEL NUMBER:

Document Number:

PDI-254I & PDI-255E Backer Plates PD196-094R6

Installation Instructions

Page 2 of 3

BACKER PLATE INFORMATION

PDi Communication Systems, Inc. 40 Greenwood Ln Springboro, Ohio 45066 USA www.pdiarm.com and www.mymedTV.com Phone 800.628.9870

MODEL NUMBER:

Document Number:

PDI-254I & PDI-255E Backer Plates PD196-094R6

Installation Instructions

Page 3 of 3

MOUNTING OPTIONS For wood studs, the suggested mounting anchors are steel lag screws for wood, and should meet ASME B18.2.1 specifications. The bolts should be coated for corrosion resistance.
For metal studs, the suggested mounting anchors are Hilti Toggler anchors, like the one shown below. The anchor should be sized for 1/4-20 fastener, with a minimum SAE grade 5 rated bolt. Install per manufacturer’s instructions.

Toggler Anchor
Installation Note: The head of the mounting bolts or the inserts on the back of the external plates will seem to prevent the plate from flush mounting on or behind the drywall sheets. The drywall can be drilled or compressed to ensure flush mounting.
WARRANTY PDi Communication Systems Inc., (“PDi”) standard warranty information is found at pdiarm.com. For information regarding authorized servicing and all other information pertaining to this warranty, please contact PDi COMMUNICATION SYSTEMS, INC. at 40 Greenwood Ln, Springboro, Ohio 45066 or phone 800-628-9870 and ask for the PDi ProServices team.

PDi Communication Systems, Inc. 40 Greenwood Ln Springboro, Ohio 45066 USA www.pdiarm.com and www.mymedTV.com Phone 800.628.9870

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals