TRAXON DW 40W Wall Washer Owner’s Manual
- September 28, 2024
- traxon
Table of Contents
DW 40W Wall Washer
“`html
Product Specifications
- Light Source: LED
- Color Range: White
- Beam Angles: Various
- Luminous Flux: 1640 lm
- Efficacy: 38.97 lm/W
- Lumen Maintenance: LM-80 compliant
- Size: Varies
- Weight: Varies
- Operating Temperature: Varies
- Input Voltage: 120-277VAC 50/60Hz
- Power Consumption: 40W
- Power Factor: 0.9
- Regulatory/Product Certifications: Varies
- Environment Humidity: Varies
Product Usage Instructions
Installation
-
Ensure proper power supply and DMX connections.
-
Use Cat5e UTP or higher cables for DMX communication.
-
Properly terminate each DMX512 link with a 120 Ohm
resistor. -
Follow the daisy chain topology for connecting fixtures.
Operation
- Power on the luminaire using the AC line switch.
- Control the luminaire via DMX512 protocol.
- Utilize RDM circuits for advanced control and monitoring.
Maintenance
-
Regularly clean the luminaire and lens cover to maintain
optimal performance. -
Check for any loose connections or damaged cables.
FAQ
Q: What is the maximum number of fixtures that can be connected
in a single DMX512 link?
A: No more than (32) fixtures can be connected on a single
DMX512 link, with a maximum total length of 300m from source to the
last fixture.
Q: What type of cables should be used for DMX
communication?
A: Use Cat5e UTP or higher (stranded type only) or other cable
types suitable for DMX communication. Consult the DMX standard for
additional guidance.
Q: How should I terminate the DMX512 link to prevent signal
reflections?
A: Properly terminate each DMX512 link with a 120 Ohm resistor
to prevent signal reflections and ensure smooth operation.
“`
ProPointTM DW 40W Wall Washer
The ProPoint DW 40W Wall Washer is an AC line powered, high brightness
luminaire. The luminaire is controllable via DMX512. The system is connected
using a daisy chain topology, allowing easy installation to form long run
lengths. Remote Device Management (RDM) circuits are built into each luminaire
that enables extensive control and monitoring of the entire installation.
Product Specifications Light Source Color Range
Beam Angles Luminous Flux Efficacy Lumen Maintenance Cover-Lens Housing
Adjustment Options Size Weight Regulatory/Product Certifications Operating
Temperature Minimum Starting Temperature Storage Temperature Environment
Humidity
20 LED DW (2200K-6500K) 15°, 25°, 35° 1640 41 lm/W L70 @ 25°C 81,000 hours (10mm) .39″ Glass Die Cast Aluminum 50° Forward, 80° Backward 222mm x 165mm x 254mm (8.8″x6.5″x10″) 3.8 kgs (8.4 lbs.) ETL, FCC, RoHS, ASTM B117-16, ANSI 3G, IK10 -30°C to +50°C (-22°F to +122°F) -20°C (-4°F) -40°C to +80°C (-40°F to +158°F) IP66 Outdoor, Coastal Rated 85%, non-condensing
Electrical Specifications Input Voltage1 Power Consumption Power Factor
120-277VAC 50/60Hz 40W 0.9
System Specifications Power Control Power Supply
AC Line DMX 512, RDM Enabled Integrated
1. Auto-switching. Single phase (line, neutral and ground).
LED CHARACTERISTICS: Because LEDs are semiconductor devices, their
performances are subject to inherent variability commonly found in
semiconductor industry. To improve consistency in performance across the same
product, LED manufacturers “sort” LEDs into bins according to different preset
parameters, such as forward driving voltage, illumination, etc. Whereas
binning is a sorting function, it is not a correction process. Inherent
variability in the manufacturing process always results in different binning
distributions according to different production lots. Traxon uses
automatically binned LEDs on its products, thereby minimizing output
variations within the model range.
As with all electronic devices, LED output degrades over time a term called
lumen depreciation. This also explains why it is nearly impossible to expect
photometric performances of two LED products with different service life spans
to be the same. The rate of LED degrade is a complicated function involving
many factors, such as operating efficiency, duration of continuous operation
and, more significantly, environmental conditions (ambient temperature for
example). If allowed, working under optimal operating temperature range and
with good ventilation, LED devices enjoy long service lives over conventional
light sources. When using/installing LED devices, care should be taken to
ensure that the devices will operate within the operating conditions specified
in respective product literature.
Lumen measurement complies with LM-79-08 standard. Lumen maintenance is
calculated based on LM-80 compliant measurement.
Product Specification
04/18 V1.0
1 of 5
ProPointTM DW 40W Wall Washer
Photometrics
Source Specifications
LED Source
White
Beam Angle
15°
Candela Distribution Cd: 0
25% 50%
75%
100%
0°
15°
30°
Light Output
90°
Color
Luminous
Temperature Flux (lm)
75°
DW (full on)
`
1640
Candela Distribution
@100%
13012
Efficacy lm/W
38.97
60°
45°
Illuminance at a Distance
Center Beam LUX
2m 2.5m
4m 6m 8m
3253 2082
813.1 361.4 203.3
For feet multiply by 3.28
Beam Width
.58m .72m
1.15m
1.73m
2.30m Vert.Spread: 16.4° Horiz.Spread: 16.4° For fc divide by 10.7
Product Specification
04/18 V1.0
2 of 5
ProPointTM DW 40W Wall Washer
— ProPoint fixtures ship with two cable whips: One cable whip for power input
consisting of two wires plus a ground and one cable whip for DMX512 RDM
input/output.
System Diagram
— No more than (32) fixtures on a single DMX512 link, max 300m total (source
to last fixture).
ProPoint Wall Washer
ProPoint Wall Washer
120-277VAC (2 Wire + Ground)
DMX512/RDM (1 x twisted pair + 1 shield/common)
fixture whip
Line voltage junction box (By others)
Data junction box (By others)
fixture whip
AC L AC N
From power source/ previous fixture
To next fixture
DMX IN
DMX OUT
DMX (+) DMX (-) DMX(Com)
Terminal Blocks (Wago 221-412 or equivalent)
DMX (+) DMX (-) DMX(Com)
From DMX transmitter/ previous fixture
To next fixture
ProPoint Wall Washer (Last fixture in line)
— Data cabling from DMX source to first fixture and between subsequent
ProPoint fixtures shall be Cat5e UTP or higher (stranded type only) or other
cable type suitable for DMX communication. Consult DMX standard for additional
guidance.
fixture whip
DMX IN
DMX OUT
DMX (+) DMX (-) DMX(Com)
DMX (+) DMX (-)
— Each DMX512 link must
be properly terminated to
120 Ohm
prevent signal reflections.
Resistor
From previous fixture
General Notes
— All data cabling must adhere to ANSI E1.11-2008 (R2013) Entertainment
Technology USITT DMX512-A, Asynchronous Serial Digital Data Transmission
Standard for Controlling Lighting Equipment and Accessories.
— Fixture is RDM capable.
— Fixtures allow a universal input of 120VAC to 277VAC.
— Data termination shall utilize cage clamp terminal blocks, or equivalent.
Wire nuts are not permissible and will void warranty.
— The method of line voltage termination, both for data and power, is at the
discretion of the installing contractor, and or engineer. Splicing and/or
joining of cables must adhere to all applicable electrical codes.
— Cables must be spliced/joined in a weatherproof enclosure/junction box,
which is to be properly rated and provided by others.
Product Specification
04/18 V1.0
3 of 5
ProPointTM DW 40W Wall Washer
Technical Specifications / Options
COLOR BEAM ANGLE
RGBW
RGBW
8°
15°
25°
35°
DW
Neutral White
2200K-6500K Dynamic White
15°
25°
35°
Static White
4000K
3000K
Neutral White Warm White
15°
25°
35°
ENVIRONMENT
CERTIFICATIONS TECHNICAL SPECIFICATIONS POWER CONSUMPTION IMPACT RATING
Suitable for Coastal
IP66
Environment
CE, cETLus, FCC, RoHS, ANSI 3G
LUMINOUS FLUX
EFFICACY
180W
IK09
7100
40lm/W
120W
IK09
4560
38lm/W
80W
IK09
2980
37lm/W
40W
IK10
1330
33lm/W
20W
IK10
725
36lm/W
INPUT VOLTAGE
120-277VAC 50/60Hz
OPERATING TEMPERATURE
-30°C to +50°C / -22°F to +122°F
POWER FACTOR
0.9
CONTROL
DMX512, RDM Enabled
Suitable for Coastal
IP66
Environment
CE, cETLus, FCC, RoHS, ANSI 3G
LUMINOUS FLUX
EFFICACY
7350
40lm/W
5250
43lm/W
3670
44lm/W
1640
41lm/W
825
41lm/W
120-277VAC 50/60Hz
-30°C to +50°C / -22°F to +122°F
0.9
DMX512, RDM Enabled
Suitable for Coastal
IP66
Environment
CE, cETLus, FCC, RoHS, ANSI 3G
LUMINOUS FLUX
EFFICACY
13380/12375 74lm/W – 68lm/W
9200/8650
76lm/W – 72lm/W
6075/5440
75lm/W – 68lm/W
2670/2540
66lm/W – 63lm/W
1340/1240
67lm/W – 62lm/W
120-277VAC 50/60Hz
-30°C to +50°C / -22°F to +122°F
0.9
DMX512, RDM Enabled
12.4″ 11.4″
180W and 120W
17.1″
11.4″
80W
10.2″
8.7″ 8.7″
13″
! !
8.8″ 6.5″
40W
6.5″
10″
20W
6.4″
5.4″ 7.8″ 5.4″
Product Specification
04/19 V1.0
4 of 5
ProPointTM DW 40W Wall Washer
Ordering
Model Number
PP
.
W4
.
9
ProPoint
Washer
Control 9: DMX
2
2
Channels 2: DW
CCT 2: DW
1
X
Cover Lens Clear
Optic 2: 15° 3: 25° 4: 35°
X
Finish 1: Gray 2: Black 3: White
Item Code AM208880055 AM226010055 AM226020055 AM226220055 AM226230055 AM226240055 AM201950055 AM226410055 AM226420055 AM225090055 AM201940055 AM225100055 AM225110055
Description ProPoint-S Wall Washer 40W 3000K 15° ProPoint-S Wall Washer 40W 3000K 25° ProPoint-S Wall Washer 40W 3000K 35° ProPoint-S Wall Washer 40W 4000K 15° ProPoint-S Wall Washer 40W 4000K 25° ProPoint-S Wall Washer 40W 4000K 35° ProPoint-S Wall Washer 40W DW 15° ProPoint-S Wall Washer 40W DW 25° ProPoint-S Wall Washer 40W DW 35° ProPoint-S Wall Washer 40W RGBW 8° ProPoint-S Wall Washer 40W RGBW 15° ProPoint-S Wall Washer 40W RGBW 25° ProPoint-S Wall Washer 40W RGBW 35°
Product Specification
04/18 V1.0
5 of 5
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>