TRAXON AM461810055 Allegro Dot XS PXL Distributor Installation Guide
- June 17, 2024
- traxon
Table of Contents
TRAXON AM461810055 Allegro Dot XS PXL Distributor
Product Information
Specifications:
- Model: PXL Distributor Pro 8 (AM461810055)
- Dimensions:
- Width: 96.00mm (3.78 inches)
- Height: 108.00mm (4.25 inches)
- Depth: 235.00mm (9.25 inches)
FAQ
- Q: Can the product be submerged in water?
- A: No, the product should not be submerged. It should be mounted on a smooth and rigid surface.
- Q: What outdoor power cable options can be used with the product?
- A: Suitable outdoor power cable options include SJTW 16AWG x 3C, SJOW 16AWG x 3C, and H05RN-F 3 x 1.0mm2.
Product Usage Instructions
Mounting:
- Mount the product on a smooth and rigid surface. Make sure it is not submerged in water.
Installation:
- Follow the mounting guide provided in the manual.
- Use appropriate outdoor power cable options like SJTW 16AWG x 3C, SJOW 16AWG x 3C, or H05RN-F 3 x 1.0mm2.
Connection:
- Connect the product using the 3-pin field-installable connector PD8 IP67 (AM461770055).
- Refer to the wire descriptions for proper connection: Live (1), Neutral (2), Earth (3).
End Cap:
- For the last data injector in a chain, use an end cap to seal the DATA OUT connector with a tightening torque of 0.9Nm.
Dimension
PXL Distributor Pro 8 (AM461810055)
3PIN FIELD INSTALLABLE CONNECTOR PD8 IP67 (AM461770055)
- Solder type field-installable connector
Outdoor power cable options (provided by others):
- SJTW 16AWG x 3C
- SJOW 16AWG x 3C
- H05RN-F 3 x 1.0mm2
- Cable OD ɸ6.5 – 9.5mm
Wire# / Description
- 1 / Live
- 2 / Neutral
- 3 / Earth
Mounting
IMPORTANT:
- For the last data injector in a chain, use end cap to seal the D ATA OUT connector.
- Tightening torque: 0.9Nm
PRECAUTIONS
WARNING
- CONNECT TO THE POWER SUPPLY IN ACCORDANCE WITH NATIONAL REGULATIONS.
- IF THE EXTERNAL FLEXIBLE CABLE OF THIS LUMINAIRE IS DAMAGED, IT SHALL BE EXCLUSIVELY REPLACED BY THE MANUFACTURER OR A SIMILAR QUALIFIED PERSON IN ORDER TO AVOID ANY HAZARD.
- INSTALLATION/MAINTENANCE ONLY BY SKILLED PERSONNEL.
- DURING OVERHAUL/MAINTENANCE ONLY USE ORIGINAL PARTS.
- IF ANY LUMINAIRE IS SUBSEQUENTLY MODIFIED, THE PERSON RESPONSIBLE FOR THE MODIFICATION SHALL BE CONSIDERED THE MANUFACTURER.
- THE MANUFACTURER BEARS NO LIABILITY FOR DAMAGE CAUSED BY INAPPROPRIATE USE OR APPLICATION.
©2023 TRAXON TECHNOLOGIES. ALL RIGHTS RESERVED.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>