TRAXON 5 Pin Male Connector User Guide
- June 1, 2024
- traxon
Table of Contents
TRAXON 5 Pin Male Connector
Specifications
- 5-pin Male connector: XB.AC.2302000 (AA438580235)
- 5-pin Female connector: XB.AC.2303000 (AA438570235)
- Field Installable AC Connector Plug and Socket
- IP66 Rated for protection against dust and water
- Compatible cable types: SJTW 3 x AWG#14 (UL) or H07RN-F 3 x 2.5mm (CE)
- Maximum number of fixtures per daisy chain based on voltage and wattage
Product Usage Instructions
- Ensure the cable A assembly matches the specifications provided in the manual for proper connection.
- For UL Cable (SJTW): Use 3 x AWG#14 and connect at the inside screw point of view.
- For CE Cable (H07RN-F): Use 3 x 2.5mm and connect at the inside screw point of view.
Connector Assembly
- Use the 5-pin Male connector for input and the 5-pin Female connector for output.
- Ensure the locking clip is present when making a connection to secure the assembly.
Interconnection Cable
- If using Cable B (optional), ensure it is compatible with the connector assembly and has an outer diameter of 10-14mm.
- Proper filled-type cable should be used to maintain the IP rating with the connector assembly.
Fixture Installation
- Use Traxon accessory parts for installation compatibility to avoid voiding the warranty.
- For the final fixture in the chain, use the end cap XB.AC.2304000.
Maximum Number of Fixtures
- Refer to the provided table to determine the maximum number of fixtures per daisy chain based on voltage and wattage.
- The actual number of fixtures may vary depending on cable interconnection lengths. Consult the regional sales office for confirmation.
FAQ
- Q: What type of cable should be used for UL and CE applications?
- A: For UL applications, use SJTW 3 x AWG#14 cable, and for CE applications, use H07RN-F 3 x 2.5mm cable.
- Q: What should be done to ensure proper connection using the connectors?
- A: Ensure the locking clip is present when making a connection with the 5-pin Male and Female connectors to secure the assembly.
Cable Connection
- Max. number of fixtures is based on minimal interconnection lengths between AC Mains-to-fixture and Fixture-to-Fixture
- Actual number of fixtures is dependent on cable interconnection lengths.
- Number of fixtures will reduce if longer cable lengths are used.
- Please consult the regional sales office to confirm maximums.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>