TRAXON V10 Linear Go Midi Installation Guide

June 15, 2024
traxon

TRAXON GO
Linear Go Midi
Mounting Guide

Dimensions (Without Glare Shield)

TRAXON V10 Linear Go Midi Dimensions (With Glare Shield)

TRAXON V10 Linear Go Midi - Dimensions

Mounting

  1. Fix the brackets and fixture fixing surfaceTRAXON V10 Linear Go Midi - surface
  2. Loosen the boltsTRAXON V10 Linear Go Midi - surface 1
  3. Adjust the fixture to desired angleTRAXON V10 Linear Go Midi - surface 2
  4. Fix the fixture with its desired angleTRAXON V10 Linear Go Midi - surface 3
  • THIS FIXTURE IS SUITABLE FOR OUTDOOR OR INDOOR USED.
  • THIS PRODUCT SHALL SELECT IEC/EN 61347-2-13 APPROVED LED DRIVER WITH SELV OUTPUT 24 VDC AS A POWER SUPPLY.

–CONNECT TO THE POWER SUPPLY IN ACCORDANCE WITH NATIONAL REGULATIONS.
–THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS LUMINAIRE CANNOT BE REPLACED; IF THE CORD IS DAMAGED, THE LUMINAIRE SHALL BE DESTROYED.
–THE LIGHT SOURCE OF THIS LUMINAIRE IS NOT REPLACEABLE; WHEN THE LIGHT SOURCE REACHES ITS END OF LIFE THE WHOLE LUMINAIRE SHALL BE REPLACED.
–INSTALLATION/MAINTENANCE ONLY BY SKILLED PERSONNEL.
–DURING OVERHAUL/MAINTENANCE ONLY USE ORIGINAL PARTS.
–IF ANY LUMINAIRE IS SUBSEQUENTLY MODIFIED, THE PERSON RESPONSIBLE FOR THE MODIFICATION SHALL BE CONSIDERED THE MANUFACTURER.
–THE MANUFACTURER BEARS NO LIABILITY FOR DAMAGE CAUSED BY INAPPROPRIATE USE OR APPLICATION.

www.traxon-ecue.com
Mounting Guide
©2023 TRAXON TECHNOLOGIES.
ALL RIGHTS RESERVED.
08/23 V1.0

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals