traxon Allegro Dot XS PXL Distributor Pro 8 User Guide
- June 5, 2024
- traxon
Table of Contents
Allegro Dot XS PXL Distributor Pro 8
Mounting Guide
PXL Distributor Pro 8 (AM461810055)
Mounting
3PIN FIELD INSTALLABLE CONNECTOR PD8 IP67 (AM461770055) -Solder type field- installable connector
300V 20A
Outdoor power cable options (provided by others):
SJTW 16AWG x 3C
SJOW 16AWG x 3C
H05RN-F 3 x 1.0mm2
Wire# | Description |
---|---|
1 | Live |
2 | Neutral |
3 | Earth |
Mount on a smooth and rigid surface.
Do not submerge.
IMPORTANT:
for the last data injector in a chain, use an end cap to seal the D ATA OUT
connector.
Tightening torque: 0.9Nm.
-
CONNECT TO THE POWER SUPPLY IN ACCORDANCE WITH NATIONAL REGULATIONS.
-
IF THE EXTERNAL FLEXIBLE CABLE OF THIS LUMINAIRE IS DAMAGED,
IT SHALL BE EXCLUSIVELY REPLACED BY THE MANUFACTURER OR A SIMILAR QUALIFIED PERSON IN ORDER TO AVOID ANY HAZARD. -
INSTALLATION/MAINTENANCE ONLY BY SKILLED PERSONNEL.
-
DURING OVERHAUL/MAINTENANCE ONLY USE ORIGINAL PARTS.
-
IF ANY LUMINAIRE IS SUBSEQUENTLY MODIFIED, THE PERSON RESPONSIBLE FOR THE MODIFICATION SHALL BE CONSIDERED THE MANUFACTURER.
-
THE MANUFACTURER BEARS NO LIABILITY FOR DAMAGE CAUSED BY INAPPROPRIATE USE OR APPLICATION.
Our Brands
www.traxontechnologies.com | www.osram.us/traxon
©2022 TRAXON TECHNOLOGIES – AN OSRAM BUSINESS. ALL RIGHTS RESERVED. TRAXON™, AND TX CONNECT®, ARE TRADEMARKS OF TRAXON TECHNOLOGIES. U.S. PATENTS, E.U. PATENTS, JAPAN PATENTS, AND OTHER PATENTS PENDING. SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.