TRAXON AA766150055 Allegro Media Tube Lite User Guide
- May 15, 2024
- traxon
Table of Contents
AA766150055 Allegro Media Tube Lite
User Guide Allegro Media Tube® Lite Mounting Guide
AA766150055 Allegro Media Tube Lite
Dimensions (Direct View) NOTE: Please see CAD files for additional dimensional data.
Dimensions (Diffused View)
NOTE: Please see CAD files for additional dimensional data.
Tube-to-tube Clearance
To maintain consistent LED pitch and to allow for thermal expansion, a minimum of 4mm / 0.16″ is required between luminaire’s. Tube-to-tube Connection
If you do not hear “click”, rotate
the spring loaded connector manually to ensure that the connectors are
properly mated.
Mounting
System Diagram
Wiring diagram shows only typical connections. Max. number of fixtures is based on minimal interconnection lengths. Actual number of fixtures is dependent on cable interconnections. Number of fixtures will reduce if longer cable lengths are used. Consult with your regional sales office to confirm maximums.
–CONNECT TO THE POWER SUPPLY IN ACCORDANCE WITH NATIONAL REGULATIONS.
–IF THE EXTERNAL FLEXIBLE CABLE OF THIS LUMINAIRE IS DAMAGED, IT SHALL BE
EXCLUSIVELY REPLACED BY THE MANUFACTURER OR A SIMILAR QUALIFIED PERSON IN
ORDER TO AVOID ANY HAZARD.
–INSTALLATION/MAINTENANCE ONLY BY SKILLED PERSONNEL.
–DURING OVERHAUL/MAINTENANCE ONLY USE ORIGINAL PARTS.
–IF ANY LUMINAIRE IS SUBSEQUENTLY MODIFIED, THE PERSON RESPONSIBLE FOR THE
MODIFICATION SHALL BE CONSIDERED THE MANUFACTURER.
–THE MANUFACTURER BEARS NO LIABILITY FOR DAMAGE CAUSED BY INAPPROPRIATE USE OR
APPLICATION.
www.traxon-ecue.com
©2023 TRAXON TECHNOLOGIES.
ALL RIGHTS RESERVED.
Mounting Guide