HOMCOM IN221000249V03_UK Adjustable PU Leather Recliner Swivel Executive Reclining Installation Guide

HOMCOM IN221000249V03_UK Adjustable PU Leather Recliner Swivel Executive

Reclining

Product Specifications :

• Model: IN221000249V03
• Languages: UK, DE, FR, ES, PT, IT
• Components: Steering Axle, Brake

Product Usage Instructions

1. Assembly:
   Insert the casing into the steering axle as per the following steps:

2. Identify the casing and steering axle components.

3. Align the casing with the steering axle.

4. Insert the casing securely into the steering axle.

5. Brake Usage:
   To utilize the brake for slowing down or stopping, follow these steps:

6. Locate the brake mechanism on the product.

7. Pull the brake handle to engage the braking system.

8. Release the brake handle to disengage the brake.

Frequently Asked Questions (FAQ):

• Q: How do I assemble the product?
  A: Follow the assembly instructions provided in the manual. Ensure proper alignment and secure insertion of components.

• Q: How does the brake function?
  A: Pull the brake handle to slow down or stop the product. Release the handle to disengage the brake mechanism.

IN221000249V03_UK_DE_FR_ES_PT_IT

CHILDREN’S Pedal GO KART

• Assembly video please scan the QR code.
• The chain maintain video please scan the QR code.

WARNING: Certification Age: 5+ years old; Max weight: 50 kg.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

ASSEMBLY INSTRUCTION

PARTS

Note:
All screws, nuts and small plastic parts are pre-installed in the corresponding position, please follow the steps to remove before you install the product.

Assembly tools required :

WARNING :

1. CHOKING HAZARD—SmaII parts. Not for children under 3 years.
2. 0nIy allowed for adults to install, keep children away.
3.  To be used under the direct supervision of an adult.
4. Just only allow one child to use.
5. Please use on a flat and clean surface. Never use near steps, sloped driveways, hills roadways, alleys, swimming pool areas, road, on grass or wet surfaces or other bodies of water.
6. Before driving toy car each time, adult should inspect screws of every parts, please tighten the screw cap if any looseness. secure all fasteners before every ride.
7. Always wear shoes and suitable protective equipment. always wear a local standard approved helmet while riding, with the chinstrap securely fastened.
8. Do not ride the product at dusk, at night or at times of limited visibility.
9. Always comply with local laws and regulations.

MAINTENANCE & CARE

• A. Keep all instructions and parts relating to this product for future reference.
• B. Regularly check for damage and that all screws are securely tightened.
• C. Check that the seat is securely fastened.
• D. Lubricate the chain as often as required.
• E. Regularly check tyre pressures.

Attach the Steering connection plate

Turn the body over and remove the connecting pieces.

1. Place the connector on the steering bracket. Pay attention to the plane and convex surfaces of the connecting pieces in this step, with the plane facing upwards. The convex surface is used to limit the steering Angle of the steering bracket.
2. Secure with M5*12mm & M5 nut the Steering connection plate.

Attach the Rear Wheels

1. Slide the drive bracket into the rear axle.
2. attach the drive bracket to the rear axle using M5*25 screws and M5 nuts.
3. Slide the rear wheel into the rear axle so that it is connected to the drive bracket.
4. Slide a 10 washer onto the rear axle.
5.  Tighten the lock MIO nut to the end of the rear axle using a wrench.
6. Slide the rear wheel into the rear axle .
7. Slide a 10 washer onto the rear axle.
8. Tighten the lock MIO nut to the end of the rear axle using a wrench.

Attach the Front Wheels & Steering Axle

1. Slide a 12 washer onto the front axle.

2. Slide the wheel into the front axle.

3. Slide a 10 washer onto the front axle.

4. Tighten the lock MIO nut to the end of the front axle using a wrench.
   Repeat for the other front wheel.
   Turn the go cart on its side.

5. 1nsert the Steering Axle through the steering Axle Support, make sure the other hook to the opening hole on the Front Axle.

Attach the Steering Wheel & Front Cover

1. Insert the casing into the steering Axle.

2. Insert the Steering Wheel to the end of the Steering Axle, align the holes of the
   Steering Wheel and Steering Axle,

3. Secure with M539 screw & M5 nut the Steering Wheel.
   Remove M414 screw from the body.

4. Align the Front Cover and Body and insert bottom into the body opening slot,

5. Secure with M4*14 screw the Front Cover.

Attach the Seat

Remove M5*55mm & M5 nut from the Body.

1. Align and assemble the Seat to the Body
2. Secure with M5*55mm & M5 nut the Seat.

Use your New bicycle

1. Brake:Pull the brake to slow or stop.
2. Pedals: To move the vehicle forward and reverse.
3. Steering wheel: Controls the direction of the vehicle.

Chain Adjustment

The chain must be at the correct tightness. If too tight, the bicycle will be difficult to pedal. If too loose, the chain can come off the sprockets.

Adjust the tightness of the chain as follows:

• Turn the product downside up. Remove the ten screws on the bottom of the product with a screwdriver.
• Press the two buckles on the side of the product, Lift up the chain cover.
• Loosen the four fixed screws and adjust the screws according to the tightness of the chain.

If you have any questions, please contact our customer care center.

Our contact details are below:
0044-800-240-4004
enquiries@mhstar.co.uk

IMPORTER ADDRESS:
MH STAR I-JK LTD Unit 27, Perivale Park, Horsenden lane South Perivale, UB6 IRH
MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>