HOMCOM 344-006YL 360 Degree Rotating Seesaw for Kids User Guide
- October 30, 2023
- HOMCOM
Table of Contents
HOMCOM 344-006YL 360 Degree Rotating Seesaw for Kids
Product Information
The product is identified by the code IN221100681V01_GL or INffc014V01_GL_344-006. It comes with a user manual that contains important information and instructions for usage in multiple languages including English, French, Spanish, German, and Italian. The product has 13 numbered sections with labels ranging from A5 to 07.
Product Usage Instructions
- Before using the product, read the user manual carefully and retain it for future reference.
- Identify the correct section of the manual based on the labelprovided on the product.
- Refer to the appropriate language section based on your preference and understanding.
- Follow the instructions provided in the section carefully.
- If you encounter any issues while using the product, refer to the troubleshooting section of the manual.
- For further assistance, contact customer support.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
Dear customer,
Thank you for purchasing this product. So that your appliance serves you well,
please read all the instructions in this user’s manual. If you have any
questions, please contact our customer care center,Our contact details are
below:
Country
US
Phone
001-877-644-9366
Email [email protected]
360 Deg Rotating Seesaw
Thank vou for purchasing the 360 Deg Rotating Seesaw (SEESAW002) The outdoor play centre you have chosen adheres to European standards and has been certified by an independent laboratory.
Advice for assembly
- Respect exactly the assembly instructions. This product must be assembled by an adult.
- Keep the instruction sheet especially for the identification Of the component by the after sales service
- Before commencing, check that none of the parts are missing. You can retain excess parts as spares for future use when necessary.
Advice for safety
- This product must not be used by children under 36 months (the small parts could be swallowed). It is only for children from 3 to 7 with a 35 kg maxmum weight. It must be used under adult supervision.
- This product is only for private use at home and must never be used in parks and public gardens, in schools, camp sites. hotels, public leisure areas, etc.
- The SeeSaw should be set up on a flat surface and 2 metres away from all other things, structures or obstacles (walls, fences, Vees,washing lines or electric cables etc.. ) that could cause injury during use,
- The product must not be set up on hard surfaces (concrete, tarmac, etc.).
- The play centre must be embedded firmly into the ground, respecting the assembly ins- tructions. Only use this product when the concrete is dry.
- The anchorage must be checked regularly, in addition to the hooks and fixtures. DO not throw packaging in nature and do not leave with the range of children.
Maintenance
The metal parts do not need any particular care. However, in certain regions (ie seaside areas), certain coatings could be prone to damage. In this case. it is advised to use a rust prevention treatment.
- All parts that are under constant friction can be oiled regularly whith a suitable lubricant.
- The ground on which the game is placed should be controlled ularl . All elements such as stones or other objects that could cause injury in the case of fiall, sXould be removed.
- It is advised to remove the apparatus during the winter period, when not in use, to avoid anv deterioration due to bad weather conditions.
Practical adviæ
-
Certain safety checks should be carried out regularly on the swing set.
-
This Chek should includes, if necessary, removing any sharp edges, replacing missing screw covers,
-
tightening the nuts and bolts etc, to avoid any danger through normal wear and tear or any upturning of the swing set. Fixina into the around See overleaf
IMPÖRTANT ! hr safety reasons, the game must be embedded into the ground -
Place the game in the desired gxysition, mark a square 350 x 350 mm around each (the feet must be in the centre of the squa ) and dig a hole 350 mm deeD.Fill those holes whith a minimum of 300 mm of concrete. o not exceed the ground levél. Fit the embedding pieæ into the centre of the concrete so that fixtures for screwing the posts into place rise out of the concrete.When the concrete is dry. screw the PCEts to the embedding pieces
IMPORTANT ! Wait until the concrete is set using play centre and check anchorages
PARTS
HARDWARE
STEPS
US
Imported by Aosom LLC 27150 SW Kinsman Rd Wilsonville, OR 97070USA
MADE IN CHINA
UK
IMPORTER ADDRESS: MH STAR I-JK LTD Unit 27, Perivale Park, Horsenden lane
South Perivale, UB6 7RH
MADE IN CHINA