HOMCOM 700-159V80GY Electric Faux Leather Recliner Instruction Manual

October 30, 2023
HOMCOM

HOMCOM 700-159V80GY Electric Faux Leather Recliner

HOMCOM 700-159V80GY Electric Faux Leather Recliner

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

Only for domestic use

Instructions for use:

  • Put the chair stably on a flat floor.
  • Building the chairs in good condition.
  • Stay away from open flames.
  • Avoid the overload at the chair.

Precautions before assembly:

  • Prepare a clean and dry mounting area.
  • Verify that the product is not damaged.
  • Check that none of the pieces are missing.

Maintenance:

  • Clean with a soft fabric.
  • Regularly remove leaves and/ or water collected on the canvas.
  • Check the seating regularly.

Storage conditions:

  • The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.

Beware of crushing and cutting hazards during assembly.
The manufacturer declines all responsibility in case of damages due to a bad installation or withering.
If the seating is fitted with powered seat height adjustments, only trained personnel may replace or repair those components.

PARTS

Parts

HARDWARE

ASSEMBLY INSTRUCTIONS

Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions

Assembly Instructions

Input voltage 200-240 V
Input AC frequency 50-60 Hz
Output voltage 12 V
Output current 0.6 A
Output power 7.2 W
Average active efficiency 85 %
Efficiency at low load (10 %) 72.73 %
No-load power consumption 0.104 W

FUNCTIONAL DESCRIPTION OF MASSAGER

Functional Description Of Massager

Graphic presentation of Controller
  1. POWER: turn on/off selection key
  2. INTENSITY: high/low selection key.
  3. MODE: working mode selection key
  4. BACK: back massage function selection key
  5. LUMBAR: lumbar massage function selection key
  6. THIGH: thigh massage function selection key
  7. LEG: leg massage function selection key
Operating Instructions
  1. Insert the power into the DC socket
  2. Press the POWER key to start the unit
  3. Press the MODE key to select different working modes(PULSE,PRESS,WAVE, AUTO,NORMAL)
  4. Press the INTENSITY key to switch the intensity of vibration.
  5. Press the BACK, LUMBAR ,LEG and THIGH key to massage the different places of the body

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals