CyberPower P203UC2BK HEX Surge Protector User Manual

: September 27, 2024
: CyberPower

Table of Contents

P203UC2BK HEX Surge Protector
Specifications
Product Usage Instructions
Surge Protector Instructions
- FAQ
Q: Can I use the USB ports as a USB hub?
Q: What is the total surge protection rating of this
Q: Is it safe to plug high-power devices into this surge
Q: What is the purpose of the braided power cord?

P203UC2BK HEX Surge Protector

Specifications

Model Number: P203UC2BK
Outlets: Standard Grounded Outlets (2), USB-A
Charging Ports (1), USB-C Charging Ports (2)
Surge Protection: 350 Joules
USB-A Charging Output: 5 V/2.4 A
USB-C Charging Output: 5V/3A
USB Output Total: 20W Shared
Electrical Rating: 125 V/13 A/1625 W/60
Hz
UL Clamping Voltage: UL 1449 4th/900 V
(L-N)

Product Usage Instructions

Surge Protector Instructions

Plug the surge protector into a standard grounded wall
receptacle by fully inserting the plug and ensure that there are no
exposed conductors.
Make sure the electronic equipment is turned off before
plugging into the surge protector outlets. Do not use extension
cords to connect equipment to the surge protector.

FAQ

Q: Can I use the USB ports as a USB hub?

A: No, the USB ports on this surge protector cannot be used as a
USB hub. They are designed for charging only and do not transfer
data.

Q: What is the total surge protection rating of this

device?

A: The surge protector offers a surge protection rating of 350
Joules to safeguard your connected devices.

Q: Is it safe to plug high-power devices into this surge

protector?

A: The surge protector has an electrical rating of
125V/13A/1625W/60Hz, ensuring it can safely handle common
electronic devices within its power limits.

Q: What is the purpose of the braided power cord?

A: The braided power cord provides durability and helps prevent
tangling or damage to the cord during use.

YOUR ULTIMATE ALLY IN POWER
2-OUTLET SURGE PROTECTOR (2 AC OUTLETS & 3 USB PORTS)
P203UC2BK
USER MANUAL
1

FEATURES
1 . Braided Power Cord
2 . Standard Grounded Outlets (2)
3 . USB-A Charging Ports (1), USB-C Charging Ports (2) Connect and charge up to three (3) USB devices using the surge protected USB charging ports. *USB ports cannot be used as a USB hub. This device does not transfer data.
SURGE PROTECTOR INSTRUCTIONS
1 . Plug the surge protector into a standard grounded wall receptacle by fully inserting the plug and ensure that there are no exposed conductors.
2 . Make sure the electronic equipment is turned o~ before plugging into the surge protector outlets. Do not use extension cords to connect equipment to the surge protector.

SPECIFICATIONS

Model Number:

P203UC2BK

Outlets:

Standard Grounded Outlets (2), USB-A Charging Ports (1), USB-C Charging Ports (2)

Surge Protection:

350 Joules

USB-A Charging Output: 5 V/2.4 A

USB-C Charging Output: 5V/3A

USB Output Total:

20W Shared

Electrical Rating:

125 V/13 A/1625 W/60 Hz

UL Clamping Voltage: UL 1449 4th/900 V (L-N)

i WARNING: This product can expose you to chemicals including Styrene,
which are known to the State of California to cause cancer, and Bisphenol A (BPA), which are known to the State of California to cause birth defects or other reproductive harm.
For more information, go to www.P65Warnings.ca.gov.

2
3
Cyber Power Systems (USA), Inc. 4241 12th Avenue East, Suite 400 | Shakopee, MN 55379
CyberPowerSystems.com

CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK: Use only in dry locations and only indoors. DO NOT plug into another relocatable power tap. DO NOT “daisy chain” surge protectors. DO NOT use with any aquarium equipment. DO NOT use if properly grounded outlets are not available. DO NOT install this device if there is less than 10 meters (30 feet) of wire between the electrical outlet and electrical service panel. DO NOT use for medical or life support equipment. This device features an internal protection that will disconnect the surge protective component at the end of its useful life, but it will maintain unprotected power to the load.
FOR MORE INFORMATION
Visit CyberPowerSystems.com for more information regarding: · Product information and certifications · Product warranty · Connected equipment guarantee

TECHNICAL SUPPORT
Visit: CyberPowerSystems.com/support Toll-Free: 1-877-297-6937 © 2024 Cyber Power Systems (USA), Inc. All rights reserved. All other trademarks are the property of their respective owners.

CONFORMANCE APPROVALS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and o~, the user is encouraged to try to correct the interference by one or more of the following measures:

· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit di~erent from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.