CONQUEST S12 Pro Rugged Phone User Manual

CONQUEST S12 Pro Rugged Phone

Button Description

1. Fn key (SOS botlon /PoC Walkie Talkie botlon)
2. PTT Walkie Talkie Key
3. Front Camera
4. interphone antenna interface
5. Return botlon
6. Home key
7. Type CUSS Interface
8. Menu button
9. Volume + key
10. Volume-key
11. ON/OFF
12. Selectable button
13. Short press to take photo
14. long press to turn On/Off the flashlight
15. Fingerprint recognition
16. SIM Card cover Screw
17. NFC botlon
18.  Charge Contact
19.  Flash Light
20. Rear Camera

Dual SIM Dual Standby Single -Pass Description

“dual card dual standby single pass· design, two cards inserted in the phone cannot be used Voice and data services simultaneously.
When one of the cards is talking,
The other card can nol answer the call, If someone dials another card
at this time, you may hear”The number you dialed is out of service. please redail later.” “Sorry! The subscriber you dialed can not be connected for the moment please redial later.· or other voice prompts
When one of the cards is using dala service, the other card had no dala
service act to use.
The above situation is the single-pass feature of the mobile phone,
which can significantly reduce the power consumption and Improve
the standby time between, and the operator network status has nothing to do.
Suggest that you oonsult the local operator, open “missed call reminder<“, “call reminder” “secretary services .. and other services to avoid missing calls in the above scenario without reminding problem,

ACCESSORIES IN PACKAGE

• S12 Pro phone
• Adapter
• USB cable …..
• Instruction manual
• Warranty card
• Ma gnelo-Absorption charge cable Intercom antenna
• Battery ………..
• Type-C to 3.5 headphone adapter …

Safety instructions

please read the instruction carefully before using the mobile phone to ensure you can use your phone safely and correctly.

1. Daily use
   • Do not cover objects or apply film on the light sensor to affect the mobile phone normal use. If you are using a screen protector.do not wrap the light sensor Parts, tt is recommended that you use a special screen protector with ani:lr the light sensor.
   • Please Use original or manufacturer-approved accessories, Unauthorized product alteration or repair their own may cause, you are unable to use this product and void the warranty.
   • Do not keep the magnetic stripe card with phone for a long time, otherwise, the magnetic stripe may be demagnetized.
   • Do not expose )00( phone to strong sunlight as it may cause excessive heat damage.
   • Do not connect with other unsuitable equipment.
   • Do not disassemble the phone.
   • Do not put your phone in a high temperature or throw it on fire to avoid an explosion.
2. Traffic safety
   • Please do not use mobile phones while driving, follow relevant traffic regulations.
   • Do not place your phone over the airbag of a car or Covered area.
   • Please do not use mobile phones on airplanes. If necessary,h.m off the phone. observe the relevant regulations of the airline, in areas and times where mobile phone use is prohibited.
3. Medical equipment
   • Rado waves from mobile phones may affect some medical devices, such as the heart , Pacemakers, cochlear implants, hearing aids,
     etc. Mobile phones and these medical devices should be kept more than 20 cm safe distance. If something abnormal happens, consult
     1Nith the manufacturer, Restrictions on the use of mobile phones.

USE MACHINE TIPS

Quick loading card

USE MACHINE TIPS

Quick loading card

WARNING

1. Please make sure the USS Jack/earphone Jack cover is well plugged in and SIM cards/SD card cover is screwed tightly before making waterproof testing.
2. The waterproof function may be affected after the drop devastatingly.
3. Prominent atmosphere pressure changing may cause the receiver/speaker/microphone unworking or noising, open the USB jack/earphone jack cover can restore the functions immediately.
4. Submerge the phone may affect the receiver/speaker/ microphone, swing the phone to dry the receiver/speaker/ microphone will recover the functions,

EASY TROUBLESHOOTING 

FCC RF Exposure Information and Statement

This device meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged. Device types: TD-LTE Smart Phone (FCC ID: 2AWTK-S12PRO) has also been tested against this SAR limit. SAR information on this and other pad can be viewed online at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested simulation typical 10mm to body. To maintain compliance with FCC RF exposure requirements, use accessories should maintain a separation distance between the user’s bodies mentioned above, the use of holsters and similar accessories should not contain metallic components in its assembly, the use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

CONQUEST

Documents / Resources

| CONQUEST S12 Pro Rugged Phone [pdf] User Manual
S12PRO, 2AWTK-S12PRO, 2AWTKS12PRO, S12 Pro Rugged Phone, S12 Pro, Rugged Phone
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>