TRKD WB200 Smart Health Wristband User Manual
- June 4, 2024
- TRKD
Table of Contents
WB200 Smart Health Wristband
User Manual
IN THE BOX
WB200 Health Watch x 1
Health Watch Charger x 1
USB Wall Adapter x 1
Blood Pressure Cuff x 1
MT100 Mini Tablet x 1
Tablet Stand x 1
Customer Service844-447-1087
WB200 Health Watch Components
Health Watch – Battery Charging
| |
---|---|---
Align the metal pins on the charger to the main console rear pin holes.|
Secure the console while the battery is being charged.| When charging is
complete, the current
time mode will be displayed.
Note: When the battery is low, a blank screen or depleted battery icon will show on the display. Please charge your wristband immediately. 30 mins for full charge lasts typically 3.5 days.
Display Mode
PTT – Systolic & Diastolic Measurement
Step 1:
Tap the touchpad four times to locate the Systolic & Diastolic option on the
LED display.
Step 2:
Hold the touchpad down with your index finger for four seconds until finger
pointing on the LED display begins. Lift your finger and gently rest it over
the front light sensor located right above the touchpad with no pressure
applied for roughly 30-45 seconds. You will see a green and red light which
indicates the health watch is processing. Do not lift your finger off the
sensor until the health watch vibrates and results appear.
Note: If the LED Display shows an error, please repeat the steps above again. This means your health watch needs additional calibration. After the health watch is calibrated, future results will appear after one measurement.
SpO2 Measurement
Step 1:
Tap the touchpad five times to locate the SpO2 option on the LED display.
Step 2:
Hold the touchpad down with your index finger for four seconds until finger
pointing on the LED display begins. Lift your finger and gently rest it over
the front light sensor located right above the touchpad with no pressure
applied for roughly 30-45 seconds. You will see a green and red light which
indicates the health watch is processing. Do not lift your finger off the
sensor until the health watch vibrates and results appear.
HRV Measurement
Step 1:
Tap the touchpad six times to locate the HRV option on the LED display.
Step 2:
Press the touchpad for four seconds with the index finger only until the 0%
icon shows on LED Display flashing. While the LED display shows 0%, remove the
finger from the health watch, sit back, peacefully breathe, and remain
motionless in a comfortable position until 100% complete. Takes approximately
2 minutes. The health watch vibrates when complete and results appear.
Bluetooth (BT) No Connection
BT may lose connection due to interference from devices around even your Mini tablet. Health watch and Mini tablet BT range are 15 ~ 20 feet.
In case the BT connection does not reconnect automatically, please close and open the APP to restore the connection.
Restart your mini tablet as needed if relaunching the APP failed to sync with the health watch. In the LED Display for status, a “checkmark” represents BT is connected and an “X” represents no connection.
Disclaimer
All measurements are estimates and are for reference ONLY. Please consult a
doctor as needed.
The device complies with Part 15 of the FCC Rules.
TRKD Home Care App Manual
The App receives data from WB200 daily.
Dashboard| Displays all latest data. Tap each subsection to see the
detail of the data received.
---|---
Today’s Steps| These are the steps equivalent or movements you have
during the day. Your latest heart rate was received.
Heart Rate| Tap further to see your heart rate history. Heart rate data
is the heart rate average every five minutes.
HRV| Heart rate variability, is a measure of the variation in time
between each heartbeat, usually during sleep.
Sp02| Blood oxygen level.
PTT| Pulse Transmit Time Index – Systolic & Diastolic
BP Cuff| Blood pressure is measured with a Blood Pressure Cuff device.
Heart Rate| Heart rate measured with Blood Pressure Cuff device.
Total Active Minutes| Total active minutes today.
Notification| Notifications received from the TRKD team or generated by
alerts.
Federal Communications Commission (FCC) Statement
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not
be co-located or operating in conjunction with any other antenna or
transmitter.
To display the FCC ID- Long tap on the touch button on the Vital Summary page to display FCC ID.
Documents / Resources
| TRKD
WB200 Smart Health
Wristband
[pdf] User Manual
WB200, RPW-WB200, RPWWB200, WB200 Smart Health Wristband, Smart Health
Wristband
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>