TOURATECH BMW R1250GS 35mm Handlebar Raisers Offset Risers Instructions
- June 4, 2024
- Touratech
Table of Contents
NEW IDEAS FOR MOTORBIKES
© October 2021 by: Touratech GmbH, Germany
**BMW R1250GS 35mm Handlebar Raisers Offset Risers
**
We recommend having the accessory parts fitted by a specialist workshop.
| Caution
---|---
| Note
| Warning
| Liquid
| Torque
| Template
| 2 Persons
| Original motorcycle part
These instructions are written based
on our current state of knowledge. Information is provided without any
guarantee as to its accuracy. Subject to technical modifications.
The order of assembly steps must be followed.
Touratech accepts no liability for incorrectly fitted parts and resulting
material damage or personal injury!
Please observe applicable road vehicle (construction and use) regulations as
well as EC/ECE Directives and applicable laws in your country. If parts are
fitted which require inspection and/or approval after fitting, take your
vehicle to a testing station immediately and have the vehicle papers updated.
Check and if necessary tighten all bolted connections after 50 km.
Standard tightening torques in Nm for bolted connections with strength class
8.8.
For special tightening torques refer to your specialist workshop! Please take
into account that fitting panniers, crash bars, foot peg lowering kits (rider
and pillion), Kickstand enlargement plate, front spoilers and engine guards
may restrict the bike’s lean angle! \f modifications are made to the fairing,
stem, handlebar, fairing parts, etc., ensure that electrical wiring, brake
lines, accelerator, and clutch cables are refitted correctly. Check clearance,
on both sides with full steering lock .
Always disconnect the battery when working on the electrics! We recommend
cutting protective film to size and applying it to impact areas that are
likely to be chipped by stones. Work on the brake system and suspension should
always be carried out by a specialist workshop.
The maximum load on luggage racks is 5 kg! Luggage racks ZegaProTC is 10 kg!
If other original accessories or aftermarket accessories are used, ensure
clearance, and fitment, and do not come into contact with other parts! Apply
conventional lubricant to stainless steel bolts prior to assembly. POF fitting
instructions also can be downloaded from the Touratech webshop.
**Mounting instructions
**
R1250GS Adventure/ R1200GS ab 2013/ R1200GS Adventure ab 2014 inkl. ABE
| 
---|---
Documents / Resources
|
TOURATECH BMW R1250GS 35mm Handlebar Raisers Offset
Risers
[pdf] Instructions
BMW R1250GS, 35mm Handlebar Raisers Offset Risers, Handlebar Raisers Offset
Risers, Raisers Offset Risers, BMW R1250GS, Offset Risers
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>