NEO TOOLS 200W Double Floodlight LED SMD Instruction Manual

NEO TOOLS 200W Double Floodlight LED SMD

TRANSLATION OF ORIGINAL INSTRUCTION

Double floodlight LED SMD 100 W 8500 lm on stand
99-096

CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.

DETAILED SAFETY REGULATIONS

• Make sure the electricity is switched off before installation.
• Please read all the following instructions before installing the unit.
• If the safety shield is damaged, it must be immediately replaced with tempered glass.
• Do not use if cord is cut or damaged.
• Make sure the mains voltage in your location matches with the voltage of the device.
• Any replacement or repair should be carried out by qualified person.
• Use only when ambient temperature is between – 25°C and 50°C.
• The device heats during operation. Do not mount directly on flammable surfaces.
• The device should be placed at least 1 m from other objects.
• Do not open or dismantle the device by yourself.

SYMBOLS EXPLANATION

FIGURES EXPLANATION

Fig. B

1. Lamp
2. Lamp frame
3. Locking nuts
4. Tripod
5. Lamp locking screw

DESCRIPTION

Double LED lamp on stand equipped with SMD lamps, with power of 2 x 100W and luminous flux o 2 x 8500 lm, designed for outdoor use.

OPERATING

1. Spread the tripod’s legs to the maximum position.
2. Lock legs’ position using the locking knob (fig. B-4)
3. Unscrew the locks (fig. B-3) to slide the tubes to desired height. Screw the locks to lock the stand in desired position.
4. Attach the horizontal bar to the stand with screw.
5. Attach lamp frames to the horizontal bar with screws.
6. To adjust the floodlight angle, loosen the screws located on either side of the bracket, until the desired angle is achieved, then re-tighten.
7. Connect the lamp to the power source.

TECHNICAL DATA

Double floodlight 99- 096

Parameter| Value
Rated voltage| 230V AC 50Hz
Power| 2 x 100W
Diode count| 2 x 120
Lighting technology used| LED
Correlated column| 6500K
Useful luminous flux| 2 x 8500 lm
Waterproof class| IP65
Protection class| I
Mass| 5,4 kg
Maximum internal wire temperature| 91°C
Maximum enclosure temperature| 87,1°C

ENVIRONMENT PROTECTION

Do not dispose of electrically powered products with household wastes, they should be utilized in proper plants. Obtain information on waste utilization from your seller or local authorities. Used-up electric and electronic equipment contains substances active in natural environment. Unrecycled equipment constitutes a potential risk for environment and human health.

“Grupa Topex Spółka z ograniczoną odpowiedzialnością” Spółka komandytowa with seat
in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not limited to, text, photographies, schemes, drawings and layout of the instruction, belong to Grupa Topex exclusively and are protected by laws accordingly to Copyright and Related Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments). Copying, processing, publishing, modifications for commercial purposes of the entire Instruction or its parts without written permission of Grupa Topex are strictly forbidden and may cause civil and legal liability.

EU Declaration of Conformity

Manufacturer: Grupa Topex Sp. Z o.o. Sp.k., ul. Pograniczna 2/4 02-285 Warszawa

Product: Double floodlight
Model: 99-096
Commercial name: NEO TOOLS
Serial number: 00001 ÷ 99999

• This declaration of conformity is issued under the sole responsibility of the manufacturer.
• The product listed above is in conformity with the following EU Directives: Low Voltage Directive 2014/35/EU

EMC Directive 2014/30/EU

• RoHS Directive 2011/65/EU as amended by Directive 2015/863/EU And fulfils the requirements of the following Standards:
• EN 60598-1:2015+A1:2018; EN 60598-2-5:2015; EN 60598-2-4:2018; EN 62493:2015;
• EN IEC 55015:2019+A11:2020; EN IEC 61000-3-2:2019+A1:2021; EN 61000-3-3:2013+A1:2019; EN 61547:2009;
• EN 62321-2:2014; EN 62321-3-1:2014; EN 62321-4:2014/A1:2017; EN 62321-5:2014; EN 62321-6:2015;
• EN 62321-7-1:2015; EN 62321-7-2:2017; EN 62321-8:2017
• This declaration relates exclusively to the machinery in the state in which it was placed on the market and excludes components that are added and/or operations carried out subsequently by the final user.
• Name and address of the person residing or established in the EU and authorized to compile the technical file:
  Signed for and on behalf of: Grupa Topex Sp. Z o.o. Sp.k.
  Ul. Pograniczna 2/4
  02-285 Warszawa

Paweł Kowalski
GRUPA TOPEX Quality Agent Warsaw, 2022-06-13

Product information sheet

Supplier’s name or trade mark:| Grupa Topex Sp. z o.o. Sp.k.
Supplier’s address:| ul. Pograniczna 2/4, 02-285 Warsaw
Model identifier:| 99-096
Type of light source:| LED
Lighting technology used:| LED| Non directional or directional:| DLS
Mains or non-mains:| MLS| Connected light source (CLS):| both
Colour-tuneable light source:| No| Envelope:| Non-clear
High luminance light source:| No|  |
Anti-glare shield:| No| Dimmable:| no
Product parameters
Parameter| Value| Parameter| Value
General product parameters:
Energy consumption in on-mode (kWh/1000h)| 2×100| Energy efficiency class| F
Useful luminous flux (ϕuse), indicating if it refers to the flux in a sphere (360°), in a wide cone (120°) or in a narrow cone (90°).| 2×8500| Correlated colour temperature, rounded to the nearest 100K, or the range of correlated colour temperatures, rounded to the

nearest 100 K, that can be set.

| 6500
On – mode power (Pon), expressed in W| 2×100| Standby power (Psb), expressed in W and rounded to the second

decimal

| N/A
Networked standby power (Pnet) for CLS, expressed in W and

rounded to the second decimal

| N/A| Colour rendering index, rounded

to the nearest integer, or the range of CRI values that can be set

| 80
Outer   dimensions

without             separate control gear, lighting control  parts  an

nonlighting control parts, if any (millimeter)

| Height| See user manual| Spectral power distribution in the range 250 nm to 800 nm, at full- load|
Width| See user manual
Depth| See user manual
Claim of equivalent power| N/A| If yes, equivalent power (W)| N/A
 |  | Chromaticity coordinates (x and y)| x=0,313, y=0,337
Parameters for directional light sources:
Peak luminous intensity (cd)| 3750| Beam angle in degrees, or the range of beam angles that can be

set

| 110
Parameters for LED and OLED light sources:
R9 colour rendering index value| 1| Survival factor| 1
The lumen maintenance factor| 0,958|  |
Parameters for LED and OLED mains light sources:
Displacement factor (cos φ1)| 0,9| Colour consistency in McAdam ellipses| 6
Claims that an LED light source replaces a fluorescent light source without integrated ballast of a

particular wattage.

| N/A| If yes then replacement claim (W)| N/A
Flicker metric (Pst LM)| 1.0| Stroboscopic effect metric (SVM)| N/A

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>