roborock WD3D2A Flexi Wet and Dry Vacuum Cleaner User Manual

roborock WD3D2A Flexi Wet and Dry Vacuum Cleaner

Specifications

• Product Name: Roborock Flexi Wet and Dry Vacuum Cleaner
• User Manual Language: English

Product Information

The Roborock Flexi Wet and Dry Vacuum Cleaner is a versatile appliance designed for efficient cleaning of both wet and dry surfaces. It comes with advanced features to make cleaning tasks easier and more convenient.

Safety Information
It is important to follow all safety instructions provided in the user manual to prevent electric shock, fire, and injury. Always read the instructions carefully before using the appliance.

Product Installation
Follow the installation guide provided in the user manual to properly set up the vacuum cleaner for use. Ensure that all components are securely connected before operating the appliance.

Connecting to the App
The Roborock Flexi can be connected to a dedicated mobile app for remote control and monitoring. Follow the instructions in the manual to pair the device with the app for added convenience.

FAQ
Q: Can children use the Roborock Flexi Wet and Dry Vacuum Cleaner?
A: This product can be used by children aged 8 years and above under supervision.

Roborock Flexi
Wet and Dry Vacuum Cleaner User Manual
Read this user manual with diagrams carefully before using this product and store it properly for future reference.

Safety Information

IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the following:

• READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE).
•  Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

WARNING
To reduce the risk of fire, electric shock or injury:

• Do not use outdoors or on wet surfaces when charging. Store indoors. Use indoor only.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children, pets or plants.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Use the maintenance brush carefully to avoid injury. Keep out of reach of children.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle power cord, including power cord plug, and power cord terminals with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow. ? Do not immerse. Use only on carpet moistened by cleaning process.
• Brush may start unexpectedly. To reduce the risk of injury from moving parts, keep the power off before cleaning or servicing.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Prevent unintentional starting. Ensure the switch is in the off-position before picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents.
• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Use appliances only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
• When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
• Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
• Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C (265 °F) may cause explosion.
• Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire. ? Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
• Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care.
• Always turn off this appliance before connecting or disconnecting motorized nozzle.
• Do not use without filters in place.
• Do not use a flammable or combustible liquid to clean a floor.
• Please do not use the product when the temperature is higher than 40°C (104°F) or lower than 4°C (39°F) , or there is any liquid or sticky
• Turn off all controls before unplugging.
• When self-cleaning and drying, the temperature of accessible surfaces of the charging dock, roller and vacuum cleaner will be high.
• Please do not touch the surfaces which are prone to getting hot during use. Only touch after the surfaces have cooled down.
• This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be made by children without supervision.
• Do not vacuum cords or other cables to avoid danger.
• Only use the product in accordance with the User Manual. Any loss or damage caused by improper use will be borne by the user.
• If the dock is placed in an area susceptible to thunderstorms or with unstable voltage, take protection measures.
•  Connect to a properly grounded outlet only. See Grounding Instructions.

GROUNDING INSTRUCTIONS

This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug.
The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING – Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with  a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided  with the appliance – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
This appliance is for use on a nominal 120-V circuit and has a grounding attachment plug that looks like the plug illustrated in sketch A in Grounding methods. Make sure that the appliance is connected to an outlet having the same configuration as the plug.
No adaptor should be used with this appliance.

Grounding methods

SAVE THESE INSTRUCTIONS

Household use only.

Battery and Charging

• Please keep the power cord and docking station away from heat (such as heating plates).
• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when removing the battery.
• The battery is to be disposed of safely. Please do not discard waste batteries. Leave them to a professional recycling organization.
• Do not wipe or clean the power cord or docking station charging contacts with a piece of wet cloth or wet hands. least every three months to avoid the battery being over discharged.
• Do not discard waste batteries. Leave them with a professional recycling organization.

113 °F)
Long Storage(6 months)| -20°C ~ 20°C (-4 ~ 68 °F)

International Symbols Explanation

ON-OFF (push-push) symbol [symbol IEC 60417-5010 (2009-02)] ALTERNATING CURRENT symbol [symbol IEC 60417-5032 (2009-02)] DIRECT CURRENT symbol [symbol IEC 60417-5031 (2009-02)] PROTECTIVE EARTH (Protective Ground) symbol [symbol IEC 60417-5019 (2009-02)]

FCC Statement

Compliance Information

Product Name| Wet and Dry Vacuum Cleaner and Accessories
Product Model| Wet and Dry Vacuum Cleaner Model: WD3D2A Dock Charger Model: MDS10LRR
Compliance Statement| This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including inter-ference that may cause undesired operation.

Correspondence of the responsible party in USA
Company| Roborock Technology Co.
Address| ROOM 1227, 12TH FLOOR, 1000 N. WEST STREET, WILMINGTON, DE 19801
Email| support@roborock.com

Warning

Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

IC Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

•  This device may not cause interference, and
• This device must accept any interference, including interference that may cause undesired operation of the device.

MPE Requirements
To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended.

CAN ICES-3 (B)/NMB-3(B)

Product Introduction

Vacuum Cleaner

1. A1–1—Handle
2. A1–2—Handle Release
3. A1–3—Dirty Tank Release
4. A1–4—Dirty Tank
5. A1–5—LED Display
6. A1–6—Clean Tank Release
7. A1–7—Clean Tank
8. A1–8—Cleaning Head
9. A1–9—Roller Cover Release
10. A1–10—Roller Cover
11. A1–11—Roller

A2 Screen Functions

1. A2–1—Dirt Level
2. A2–2—ECO Mode
3. A2–3—Charging
4. A2–4—Battery Level
5. A2–5—AUTO Mode
6. A2–6—MAX Mode
7. A2–7—WiFi
   • Off: WiFi disabled
   • Flashing slowly: Waiting for connection
   • Flashing quickly: Connecting
   •  Steady on: WiFi connected
8. A2–8—Error
9. A2–9—Drying

A3 Charging Dock

1. A3–1—Charging Contacts

• A4 Power Cord
• A5 Filter
• A6 Maintenance Brush

Product Installation

Installing and Removing  the Handle

1. Insert the handle into the vacuum cleaner until it clicks in place. The screen should face forward.
2. To remove the handle, hold the handle firmly and pull it out while inserting a hard object into the hole on the back of the vacuum body to press the release button.

B2 Connecting the Charging Dock

1. B2–1— Place the charging dock upside down, connect the power cord into the bottom of the charging dock, and store the extra cord inside the power cord storage slot as required.
   Note: Power cord can exit from either side.

2. B2–2—  Place the charging dock on a flat, hard surface and then plug it into the socket.
   Note: Do not place the charging dock in humid locations or near any heat sources, such as bathrooms, kitchens, or radiators.

3. B2–3— The maintenance brush can be placed in the groove behind the charging dock.

Connecting to the App

1.  Download the App
   Search “Roborock” in the App Store or Google Play or scan the QR code to download and install the app.

2. Reset WiFi

   • Keep the machine upright and press to light up the screen and enter standby mode.
   • Press hold and until you hear the “Resetting WiFi” voice alert. The reset is complete when the WiFi indicator flashes slowly. The vacuum cleaner will then wait for a connection.
     Note: If the mobile phone fails to connect to the vacuum cleaner because your router configuration has changed or you forget your password or for any other reasons, reset the WiFi, and add your device again.

3. Add the Device
   Open the Roborock app, tap “Scan to Connect” or “Search for Device” on the home page, and add the device as instructed in the app.

Notes :

• The actual process may vary due to ongoing app updates. Follow the instructions provided in the app. Only 2.4 GHz WiFi is supported.
• If the vacuum cleaner waits more than half an hour for a connection, WiFi will be automatically disabled. If you want to reconnect, reset the WiFi before proceeding.

Instructions for Use

Filling the Clean Tank

1. Hold the upper part of handle firmly, and pull out the clean tank.
2. Open the plug, fill it with tap water, and then close it tightly. The water
3. level should not exceed the MAX line, then close the plug tightly.
   Tilt the clean tank, install the bottom in place, and then gently push it inward until it clicks in place.

Notes

•  To avoid deforming the clean tank, only use cold water.
• To prevent any potential damage to the clean tank, do not use any disinfectant and only use detergent recommended by Roborock.

Locking and Unlocking

• Tap one side of the cleaning head and push the handle to lock the cleaning head or pull the handle to unlock the cleaning head.
• Locked
• Unlocked

Starting the Vacuum Cleaner

Unlock the cleaning head and press the  button to start the vacuum cleaner.

Notes:

•  The cleaning head does not work when locked. Unlock  it first.
• Press the button to start or stop drying while the  vacuum cleaner is charging.

Low-Profile Cleaning

1. When lowering the handle during operation, the vacuum cleaner can be positioned flat to clean low-lying areas. Please be aware that when the vacuum cleaner is in this flat position, the usable volume of the dirty tank is reduced. Therefore, we recommend cleaning the  dirty tank before tackling low-lying.
2. When the vacuum cleaner is laid flat for cleaning, it will automatically adjust its operating mode.

The vacuum cleaner can only be laid flat when  the Self-Clean button faces up.

Switching Modes

Press the button to switch to AUTO, MAX, or ECO mode. The screen will display the icon for the current mode.

Note:
When the vacuum cleaner is laid flat for cleaning or when there is a significant amount of water on the floor, it will automatically adjust its operating mode to prevent sewage from entering, and there will be no response when switching between modes.

Standby and Power Off

1. When the vacuum cleaner is operating, press the button to pause it and enter standby mode.
2. In standby mode, you can lock the cleaning head and place the vacuum cleaner upright on the floor.
3. Lock the cleaning head and press and hold the button for 2 seconds to turn off the vacuum cleaner. If the vacuum cleaner is left idle for 5 minutes in standby mode, it will automatically turn off.

Note:
You can modify the settings in the app to enable automatically resume operation after unlocking the cleaning head.

Adding and Emptying Water
When the dirty tank is full or the clean tank is empty during use, the vacuum cleaner will provide audio and visual alerts. Add water into the clean tank or empty the dirty tank before continuing.

C7 Emptying the Dirty Tank

1. C7–1— Hold the body of the dirty tank with one hand, push the dirty tank release with another hand, and then remove the tank.
2. C7–2— Gently lift out the handle of the  cover to remove it, and then pour  out the dirty water.
3. C7–3— Reinstall the cover, tilt the dirty tank, install the bottom in place, and then gently push the tank inward until it clicks in place.

C8 Charging and Self-Cleaning

1. Lock the cleaning head, and place the vacuum cleaner onto the charging dock. The voice alert “Start Charging” indicates that the vacuum cleaner is charging.
2. Press the button on the top of the handle to start self-cleaning using hot water. Press and hold the button for 2 seconds to switch to DEEP self-cleaning mode using hot water. Alternatively, set the self-cleaning type to self-cleaning using water at room temperature or self-cleaning using warm water in the app. After self-cleaning finishes, empty the dirty tank to prevent odors.

Notes:

• The product is equipped with a built-in high- performance lithium-ion rechargeable battery pack. To maintain battery performance, keep the product charged for normal use.
• Self-cleaning can only be used when the vacuum cleaner is charging and the battery level is > 20%. Do not lift the vacuum cleaner during the self-cleaning process.
• Always place the vacuum cleaner on the charging dock after use to prevent water stains.

Drying
Drying starts automatically after self-cleaning is completed. To manually start or stop drying, press the button on the docked vacuum cleaner.

Note: You can use the Roborock app to stop the automatic drying that initiates after the self-cleaning process.

Voice Alert Settings
Connect to the app to adjust the volume of voice alerts.

Routine Maintenance

To maintain optimal performance of the product, refer to the following table for routine maintenance.

Note
The frequency of replacement may vary with the actual situation. If abnormal wear occurs, replace the parts immediately.

Product Maintenance
If this product is left unused for a prolonged period of time, fully charge it and unplug it before storing it in a cool and dry place. Do not place the product in humid locations or under direct sunlight. Charge it at least once every 3 months to avoid overdischarge.

Cleaning the Vacuum Cleaner

Wipe and clean the vacuum cleaner with a soft and dry cloth. Before cleaning, remove the vacuum cleaner from the charging dock and switch it off.

Cleaning the Dirty Tank and Filter

1. D1-1-Take out the dirty tank, pull out the cover, and take out the filter from the cover. Remove any trash attached to the filter using the provided maintenance brush. If the filter is dirty, rinse it with cold water and then shake off the residual water.
2. D1-2-Dry all parts thoroughly before installing them back in place. Notes:

• Use a second filter if necessary.
• Do not touch the filter with your hands, brushes, or sharp objects to avoid damage to the filter.

Cleaning the Roller and Roller Cover

1. D2-1-Press the release buttons on both sides of the cover simultaneously and lift the cover upwards to detach it.
2. D2-2-Press the buttons on one side of the roller and pull the roller out from the side. Remove any dirt attached to the roller using the provided maintenance brush, and rinse it with dean water. Notes:
   • Use the maintenance brush carefully to avoid injury.
   • Betore vou dean the ro er, make sure that the vacuum cleaner Is switched off or in upright and
3. D2-3-Rinse the detached roller cover with clean water.
4. D2-4-Reinstall the roller and roller cover in the correct order.

 Cleaning the Cleaning

Head and Dirty Water Pipe

1.  Switch off the vacuum cleaner and stabilize the body. Remove the dirty tank, roller cover, and roller
2.  Clean the roller slot and dirty water pipe with the provided maintenance brush.
3. Reinstall the roller, roller cover, and dirty tank in place. Note: Do not wash the cleaning head directly with water

Cleaning the Charging
Dock Unplug the charging dock and use a soft dry cloth to clean the surface and charging contacts of the charging dock. Note: Do not rinse the charging dock directly with water.

Basic Parameters

Vacuum Cleaner

Dock Charger

Common Issues

Environmental Protection Description

Removing the Battery

• The following information applies only when disposing of the vacuum cleaner and should not be followed for day-to-day operations.
  The chemical substances contained in the built-in lithium-ion battery of this product can cause environmental pollution. Remove the battery before disposing of this product and hand it to a professional battery recycling facility for centralized disposal.

How to remove the battery

1. Remove the handle and remove the clean tank and dirty tank at the same time.
2. Unscrew 1 screw below the top rear cover and remove the top rear cover.
3. Unscrew the 6 screws on the bottom rear cover, and then unscrew the 6 screws on the front cover.
4.  Disconnect the contacts on the motherboard and remove the battery.

Notes

• Before removing the battery, make sure it is fully drained. Do not attempt to remove the battery if the vacuum cleaner is connected to the dock.
• When unpluging the circuit board cord, avoid positive electrodes touching with negative ones to prevent causing short circuits.
• Remove the entire battery pack. Avoid damaging the battery pack casing to avoid short-circuits or leakage of hazardous substances.
• In the event of accidental contact with battery fluid, rinse thoroughly with water and seek immediate medical care.

Holiday Energy Saving Function
In holiday mode the device will switch to Low Power mode to minimize power consumption. This includes dimming of the LED indicator, and the stopping of all non-charging related functions including cleaning, remote control over WiFi, and more.
To activate holiday mode, firstly, remove the wet and dry vacuum cleaner from the charging dock and turn it off. Secondly, press and hold the Change Mode button and at the same time, put the vacuum back to the dock and wait 10 seconds until hear “ticktack” then release the button. The wet and dry vacuum cleaner, main unit and charging dock will enter holiday mode.

To deactivate holiday mode, you need two steps:

1. Remove the wet and dry vacuum cleaner from the charging dock and press and hold the Power button for 10 seconds.
2. Unplug the power cord and reconnect.

Wet and Dry Vacuum Cleaner

• Manufacturer: Shenzhen Roborock Innovation Technology Co., Ltd.
• Product Model: WD3D2A
• Address of Manufacturer: Room 1802, Building D1, Nanshan Zhiyuan, No.1001
• Xueyuan Avenue, Changyuan Community, Taoyuan Street, Nanshan District, Shenzhen, P.R. China
• For more product information, visit our website: www.roborock.com
• For after-sales support, contact our support team at: support@roborock.com (United States/Canada/Non-Europe)
• 1-855-960-4321 (United States only)
• 1-833-421-1915 (Canada only)

References

• Roborock US Official Store | Intelligent Robot Vacuum Cleaner and Mop

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>