roborock Q340RR01 Vacuum Cleaner Instruction Manual
- June 5, 2024
- Roborock
Table of Contents
Q340RR01 Vacuum Cleaner
Instruction Manual
Read this safety guideline and certification document carefully before using this product and store it properly for future reference.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE). Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
WARNING
To reduce the risk of fire, electric shock, or injury:
- Do not use outdoors or on wet surfaces.
- The user must read the instruction manual.
- Risk of Injury. Brush May Start Unexpectedly. Disconnect the main Brush Before Cleaning or Servicing.
- Do not allow it to be used as a toy. Close attention is necessary when used by or near children, pets or plants.
- Use only as described in this manual. Use only the manufacturer’s recommended attachments.
- Do not use a damaged cord or plug. If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
- Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.
- Do not run appliance over cord. Keep cord away from heated surfaces.
- Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
- Do not handle chargers, including charger plug, and charger terminals with wet hands.
- Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
- Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
- Do not use it to pick up flammable or combustible liquids, such as gasoline, or use it in areas where they may be present.
- Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
- Do not use without a dust bag.
- Prevent unintentional starting. Ensure the switch is in the off-position before connecting to the battery pack, picking up, or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliance that has the switch on invites accidents.
- Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
- Use appliances only with specifically designated battery packs. The use of any other battery packs may create a risk of injury and fire.
- Turn off the appliance before making any adjustments, changing accessories, or storing the appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally.
- When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts the eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
- Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
- Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C (266°F) may cause an explosion.
- Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
- Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
- Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care.
- Do not use the product when the temperature is higher than 40°C (104°F) or lower than 4°C (39°F), or if there is any liquid or a sticky substance on the floor.
SAVE THESE INSTRUCTIONS
Household use only.
Laser Safety
Class 1 laser product. Complies with 21 CFR 1040.10 and 1040.11 except for
conformance with IEC 60825-1 Ed. 3., as described in Laser Notice 56, dated
May 8, 2019.
FCC/IC Statement
Warning
Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
MPE Requirements
To satisfy FCC/IC RF exposure requirements, a separation distance of 20 cm or
more should be maintained between the antenna of this device and persons
during device operation. To ensure compliance, operations at closer to this
distance are not recommended.
CAN ICES-3 (B)/NMB-3(B)
Battery and Charging
Battery pack charging temperature | 4°C – 40°C (39°F – 104°F) |
---|---|
Battery pack using temperature | 4°C – 40°C (39°F – 104°F) |
Battery pack storage temperature | Long Storage (3 months) |
– 113°F)
Long Storage (6 months)| -20°C – 20°C (-4°F – 68°F)
Holiday Energy Saving Function
When the robot is docked, press and hold “Dock” for 10 seconds or until you
hear an alert sound. This will activate Holiday mode.
In this mode, the robot will switch to Low Power mode to minimize power
consumption. This includes a dimming of the LED indicator, and the stopping of
all non-charging-related functions including cleaning, remote control over
WiFi, and more.
To deactivate Holiday mode, press and hold “Dock” for 10 seconds until the LED
indicator brightens.
4.03.0438V1.0
Documents / Resources
|
roborock Q340RR01 Vacuum
Cleaner
[pdf] Instruction Manual
Q340RR01, 2AN2O-Q340RR01, 2AN2OQ340RR01, Q340RR01 Vacuum Cleaner, Q340RR01,
Vacuum Cleaner
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>