iGaur YNS3 Sky Wireless Music Lamp User Manual

iGaur YNS3 Sky Wireless Music Lamp

Model :YN-S3
Product Manuals

Product Appearance

1. Leather handle strap
2. Sound box cavity
3. Charging base
4. Atmosphere lamp
5. atmosphere light touch board
6. USB input outlet
7. Type-C input port

Packing List

• charger xl
• Instruction manual lx
• l Type-C xl
• Adapter xl

Indicator Light Function

Insert the Type-C charging cable When charging , the red light in the middle is steady on. When fully charged, the red light is off

How To Use Charging

When charging wirelessly, be sure to plug the Type-C cable into this product to use it

Key Function

• Switch on-off/play/pause/hands-free call
  Long press for 5 seconds to power on or off, in the playing state, short press to pause the song, short press again to play the song. When a call comes, short press to answer the call, long press for 2 seconds to reject the call

• Bluetooth Switch
  Press to tum Bluetooth on or off. Long press the Bluetooth key of any speaker for seconds to enter or close the TWS box mode, which can realize the interconnection of two speakers and achieve the left and right stereo channel surround effect

• Volume up/next song
  When the volume increases to the maximum, the ‘Dong Dong” tone will sound Press and hold to play the next song V

• Volume down/last song
  When in play status, short press in sequence to lower the volume, long press will play the previous song

How To Pair Your Speakers

1. Long press the on key for 5 seconds to start up, and there will be a prompt sound, and the blue light will be steady on
2. Sh01t press the Bluetooth to turn on. The blue light in the middle flashes quickly.the Bluetooth is searching in
3. Atthis time, open your phoneS Bluetooth function, in the Bluetooth device, search for Bluetooth speakers appear [iGaur S3] words
4. CIickon [iGaur S3] to automatically enter the pairing. After the pairing connection is successful, there will be a prompt tone and the blue light will flash slowly.

How To Pair The TWS

1. Long press the Bluetooth key of any speaker for 3 seconds to enter the TWS box matching mode, wait for about 5 seconds, the Wvo speakers interconnect, the host blue light flash quickly, the secondary blue light flash slovvly, the host is paired with the mobile phone Bluetooth, Bluetooth is connected, the main and secondary blue lights flash SIOL’Iy at the same time, to achieve the left and right stereo channel surround effect
2. Long press the Bluetooth key of any speaker again for 3 seconds to turn off the TWS box mode and play music separately.

Use Method Of Atmosphere Lamp

1. touch the f irst time, the brightness is ofthe highest bnghtness
2. touch the second time the brightness is 70% of the hlghest brightness
3. .touch the third time, for the highest brightness
4. .touch the fourth time, turn off the light
5. Long press for 5 seconds to enter the stepless dimming mode.

Product Parameters

• Prcxiuct Model : YN-S3
• Power input: 9V=3A 12V=3A
• Lamp power: IW
• USB wired output : 2A
• Speaker Power: 20W
• Battery capacity: 7.4V, 2000mAh

( Note: Model YN-S3A has no built-in Li-battery)
Implementation standard. OBIT 13837-20120B 17625.1-20120B 8898-201 Itrrttt

Cautions

• This product requiresanadapterwith9V -3Aor12V -3Aorabove. Donotuse9V 2A and below adapters to charge the product, low power input will cause the device to not work properly
• Be sure to use the fast charging cable configured with the product or a Type-C cable that rneets the fast charging standard.
• Please use a power adapter that has been certified by CCC and complies with the relevant standards.
• If you want to dean this product, please disconnect the power
• The working temperature range of the product is 20-450
• Product built-in lithium battery, can not be replaced, do not discard or put in the fire, so as not to cause danger.

FCC

device complies with pan 15 of the FCC Rules. Operation is subject to the following two conditions: (I) This may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: “Illis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to pan 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. “Illis equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance With the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference Will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

RF warningforP01table device:
The deGce has been evaluated to meet general RF requirement “Ihe device can be used in portable exposure

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>