SinoGNSS E300 RTK Aerial Mapping Drone Instructions
- October 30, 2023
- SinoGNSS
Table of Contents
SinoGNSS E300 RTK Aerial Mapping Drone
Product Information
The E300 RTK Drone is a quadcopter with 4 propellers that operates in RTK/PPK work mode. It has automatic take-off and landing features and a maximum flight time of 60 minutes without payload or 50 minutes with a 1kg payload. The drone has a measurement radius of 10km and can reach a maximum flight altitude of 1000m. It comes with a professional payload that has a detachable design and multiple options for various purposes. The drone is equipped with high- precision GNSS modules that provide centimeter accuracy without GCPs and intelligent recognition algorithms that ensure the consistency of image resolution. The drone also has redundancy design on key modules to ensure safety and a smart battery design that prolongs battery life.
Camera Options
The E300 RTK Drone has two camera options, the C20 basic camera and the C50
optional camera. The C20 camera has a pixel count, weight, and CMOS size of
23.5mm, 15.6mm, and minimal trigger time, respectively. It has a focal length
of lens, power supply, attitude accuracy, and communication features. The C50
camera has a pixel count, weight, and CMOS size of 145mm, 145mm, and minimal
trigger time, respectively. It has a focal length of lens, power supply,
trigger configuration, storage, and communication features.
C20 BASIC CAMERA
C50
OPTIONAL CAMERA
General Specifications
- Drone Type: Quadcopter with 4 propellers
- Work Mode: RTK/PPK
- Take-off & Landing: Automatic
- Max Flight Time: 60 min (without payload) or 50 min (with 1kg payload)
- Measurement Radius: 10 km
- Assembly Time: Start < 1 min / Finish < 1 min
Size: 520 × 520 × 240 mm
Weight: 7kg
Flight Specifications
- Max Level Flight Speed: 20 m/s
- Max Climb Speed: 6 m/s
- Max Cruise Speed: 15 m/s
- Max Flight Altitude: 1000 m
- Wind Resistance: 17.1 m/sec (level 7)
GNSS Specifications
- GPS: L1 C/A, L2C, L2P, L5
- BeiDou: B1, B2, B3
- BeiDou Global: B1C, B2a
- GLONASS: L1 C/A, L1P, L2 C/A, L2P
- Galileo: E1/E5-a/E5-b/AltBOC/E6
- QZSS: L1C, L2, L5, L1C/A
- RTK Accuracy: 8 mm + 1 ppm Horizontal, 15 mm + 1 ppm Vertical
- PPK Accuracy: 8 mm + 1 ppm Horizontal, 15 mm + 1 ppm Vertical
Physical Specifications
- Size: 520 mm
- Weight without Payload: 1.8 kg
- Payload: Up to 3 kg
- Max Take-off Weight: 7 kg
- Size of Box: 520 mm
Product Usage Instructions
Before using the E300 RTK Drone, ensure that the drone is fully charged and
the camera is properly attached. Follow these steps to use the drone:
- Turn on the drone by pressing the power button.
- Connect the remote control to the drone.
- Calibrate the compass and IMU before take-off.
- Choose the camera option (C20 or C50) depending on your needs.
- Select the work mode (RTK or PPK) and set up the GNSS specifications accordingly.
- Plan your route using the flight control software, either by generating automatic routes, editing manual routes, or importing KML files.
- Attach any necessary payloads to the drone.
- Take off and navigate the drone to your desired location using the remote control.
- Once in position, activate the camera and take photos or videos as needed.
- Landing the drone is automatic, but make sure to monitor the drone’s descent and ensure a safe landing.
- After use, clean and store the drone in its transport case.
PRODUCT COMPONENTS
FEATURES
PROFESSIONAL PAYLOAD
Detachable design and multiple payload options for your various purposes.
INTELLIGENT ROUTE PLANNING
Support automatic route generation, manual route editing or KML file import.
SAFETY & EFFICIENCY
Redundancy design on the key modules ensure the safety. 60min long working
time for higher efficiency.
FREE
OF GCPS
Embedded with high precision GNSS module, providing centimeter accuracy
without GCPs.
TERRAIN AWARENESS
Based on intelligent recognition algorithms, ensuring the consistency of image
resolution.
SMART
BATTERY DESIGN
Automatic control of dynamic battery charging and discharging, voltage load
balancing and prolonging battery life.
FLIGHT CONTROL SOFTWARE
Partnered flight control software equipped with clear interface, easy workflow, powerful fight control capability, which can completely satisfy the the requirements of high-efficiency, high-quality and high-precision aerial survey operations.
- Clear interface and operation guidance of flight route planning, making it convenient and fast to plan a flight task.
- Perform automated flight missions after connecting the drone, human operation during the whole flight only includes execute, pause and end the task.
- Support manual control of the flight attitude via computer keyboard. Click the “Pause” button to enter the manual control mode in special circumstances.
- Wait for the next instruction at a safe altitude when returning from the flight mission and landing, the flight can only be continued under safe conditions.
ComNav Technology Ltd.
Building 2, No. 618 Chengliu Middle Road,201801 Shanghai, China
Tel : +86 21 64056796
Fax: +86 21 54309582
Email: sales@comnavtech.com
www.comnavtech.com
2021, ComNav Technology Ltd. All rights reserved. SinoGNSS is the official
trade mark of ComNav Technology Ltd., registered in People’s Republic of
China, EU, USA and Canada. All other trademarks are the property of their
respective owners. (August, 2021).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>