GardePro B180C Baby Monitor User Manual

GardePro B180C Baby Monitor

Product Information

Specifications

• Camera Model: B180C
• Doc Version: V3.1.0 en

Safety Instructions

• DANGER – Keep the adapter cord 3ft(1m) away from the baby to prevent the risk of entanglement and suffocation.
• NEVER place the camera or power supply inside a child’s cot/crib.
• SHOCKING WARNING – To prevent electric shock, NEVER use the camera or monitor near water, including near a bathtub, sink, laundry tub, wet basement, etc.
• Use only the AC adapters and cords provided in the box. Never use unofficial third-party power adapters or cords that are not specifically designed for the device, as they may cause damage.
• This product is not a toy. Do not allow children to play with it.

Product Introduction

The Camera (B180C)

The B180C camera is designed to monitor the baby and perform additional functions such as playing lullabies, detecting sound, motion, and environmental temperature.

Camera Interfaces and Descriptions

storage.
Speaker| Play sound.
Indicator light| Show the camera’s status: Green for power on, Flashing Green
for connecting / updating, and OFF for successful operation. It can
be turned off/on by the monitor.
Temperature sensor| Detect the environment temperature. Keep it away from back
cooling holes.
USB-C jack| Charge port, supports 5V/2A only.
Mounting hole| For mounting on the wall using the wall mounting
accessories.
PAIR| Press the button to add the camera to the monitor following the
instructions on the screen.

The Compatible Monitor (B180M)

The B180C camera must be connected to a compatible monitor to function properly. The B180M monitor is one of the compatible monitors.

Getting Started

What is Included

• 1 x Camera
• 1 x 5V/2A Power Adapter
• 1 x 9ft/3m USB cord (USB-A to USB-C)
• 1 x Wall Mount
• 1 x Instruction Manual

Product Introduction

Refer to the previous sections for detailed information about the camera and the compatible monitor.

Getting Started

Power the Camera

Connect the provided 5V/2A power adapter to the camera’s USB-C jack. Plug the adapter into a power outlet.

Pair and Connect

Follow the instructions on the monitor’s screen to pair and connect the camera to the monitor. Press the PAIR button on the camera to initiate the pairing process.

Remove the Camera

To remove the camera, disconnect the power adapter from the camera and unplug it from the power outlet.

Set the Camera

Place the camera in a suitable location to monitor the baby. Use the wall mount and mounting accessories, if desired.

Help for the Camera

Refer to the instruction manual for further assistance with using the camera and its features.

FAQ

• Q: Can I use a third-party power adapter with the camera?
  A: No, it is recommended to use only the AC adapters and cords provided in the box.

• Q: Can children play with the camera?
  A: No, this product is not a toy. Do not allow children to play with it.

• Q: How do I turn off the indicator light on the camera?
  A: The indicator light can be turned off/on by the monitor.

Camera Model# B180C
Doc V3.1.0 en

SAFETY INSTRUCTIONS

WARNING

• DANGER – Keep the adapter cord 3ft(1m) away from the baby to prevent the risk of entanglement and suffocation.
• NEVER place the camera or power supply inside a child’s cot/crib.
• SHOCKING WARNING – To prevent electric shock, NEVER use the camera or monitor near water, including near a bathtub, sink, laundry tub, wet basement, etc.
• Use only the AC adapters and cords provided in the box. Never use unofficial third-party power adapters or cords that are not specifically designed for the device, as they may cause damage.
• This product is not a toy. Do not allow children to play with it.

The Camera and its Compatible Monitor

• The camera CAN NOT WORK ALONE, it must connect to a COMPATIBLE MONITOR. The B180M monitor is one of its compatible monitors.
• If you purchase a camera SEPARATELY from us, you must follow the instructions in the manual to connect it to a compatible monitor.
• You must ensure that the devices can establish radio communication. The distance of communication between the camera and monitor may be impacted by their environmental conditions.

WHAT IS INCLUDED

1. 1 x Camera, 1 x 5V/2A Power Adapter, 1 x 9ft/3m USB cord (USB-A to USB-C) , and 1 x Wall Mount.
2. 1 x Instruction Manual

PRODUCT INTRODUCTION

THE CAMERA

The B180C camera can monitor the baby, play lullabies, detect sound, motion, and environmental temperature.

Table 1: Camera Interfaces and descriptions

storage.
| *Tilt up to the maximum position to find it.
---|---
4 Speaker| Play sound.

5 Indicator light

| Show the camera’s status: Green for power on, Flashing Green for connecting / updating, and OFF for successful operation.

• It can be turned off/on by the monitor.

6 Temperature sensor| Detect the environment temperature.

• Keep it away from back cooling holes.

7 USB-C jack| Charge port, supports 5V/2A only.
8 Mounting hole| For mounting on the wall using the wall mounting accessories.

9 PAIR

| Press the button to add the camera to the monitor following the instructions on the

screen.

THE COMPATIBLE MONITOR
The B180C MUST be connected to a compatible Monitor to function properly. The types of monitors may have some change with the time.
The B180M monitor is one of the compatible monitors.

GETTING STARTED

POWER THE CAMERA

1. Correctly insert the USB-A plug of the 9ft power cord into the jack of the 5V/2A power adapter. Make sure to insert the cord in the correct orientation to avoid damaging the cable or device.
2. Correctly insert the USB-C plug of the 9ft power cord into the USB type-C jack of camera.
3. Insert the power adapter into your power outlet and ensure that it is switched on. You will now see the green light of the camera flashing, indicating that it is powered well.

PAIR AND CONNECT

1. Make sure the monitor and camera are powered on.
2. On the Monitor: Press M button to enter menu > Navigate to camera management > Select “+” > OK to add a camera.
3. On the Camera: Press the “PAIR” button located under the camera within 30 seconds.

After seeing “Successfully paired” and waiting about 10 seconds you can find the live stream on the monitor.

REMOVE THE CAMERA
Remove the Camera on the Monitor following the guide.
Press M button on the monitor to enter Menu > Camera Management > press Left / Right to select a camera > press OK to remove camera > press OK to confirm.

SET THE CAMERA
Press M button on the monitor to enter Menu > Camera Settings set all about the camera, such as the smart detection, night vision, etc.

HELP FOR THE CAMERA
If you have any trouble in using the camera you can contact us from the monitor’s MENU > HELP > FAQ or CONTACT US.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>