roborock 6970995784602 S7 MaxV Plus Robot Vacuum Cleaner User Manual

: June 4, 2024
: Roborock

Table of Contents

roborock 6970995784602 S7 MaxV Plus Robot Vacuum Cleaner
Safety Information
Product Overview
Installation
Connecting to the App
Instructions
App Features
Routine Maintenance
Read User Manual Online (PDF format)
Download This Manual (PDF format)

roborock 6970995784602 S7 MaxV Plus Robot Vacuum Cleaner

Safety Information

For use only with roborock CDZ11RR, CDZ12RR, AED01LRR, AED02LRR, EWFD01LRR or EWFD02LRR charger.
Place the cords from other appliances out of the area to be cleaned.
Do not operate the vacuum in a room where an infant or child is sleeping.
Do not operate the vacuum in an area where there are lit candles or fragile objects on the floor to be cleaned.
Do not operate the vacuum in a room that has lit candles on furniture that the vacuum may accidentally hit or bump into.
Do not allow children to sit on the vacuum.

Battery and Charging

Keep the charging dock away from heat (such as radiators).
Do not wipe the charging contacts with wet cloth or wet hands.
Turn the robot off and use original packaging for shipment.
If placing the robot into storage, charge it fully and turn it off before placing it in a cool dry place. Recharge it at least
every three months to prevent the battery over discharging.
Do not use the product when the temperature is higher than 40°C (104°F) or lower than 4°C (39°F), or there is any liquid or sticky substance on the floor.

International Symbols Explanation

ALTERNATING CURRENT symbol [symbol IEC 60417-5032 (2009-02)]
DIRECT CURRENT symbol [symbol IEC 60417-5031 (2009-02)]

FCC/IC Statement

Compliance Information

Product Name| Robotic Vacuum Cleaner with Charging Dock
Product Model| Robotic Vacuum Cleaner Model: S270RR Dock Charger Model: CDZ11RR or CDZ12RR Auto-Empty Dock Model: AED01LRR, AED02LRR Empty Wash Fill Dock: EWFD01LRR, EWFD02LRR
Compliance Statement| This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Correspondence of the responsible party in USA
Company| Roborock Technology Co.
Address| 108 West 13th Street, Wilmington, Delaware 19801.
Email| support@roborock.com

Product Overview

Robot (Top View)
Power/Clean
- Press and hold to turn the robot on or off
- Press to start cleaning
  Power Indicator
- White: Battery level 20%
- Red: Battery level < 20%
- Pulsing: Charging or starting up
- Flashing red: Error
  Spot Clean/Child Lock
- Press to Spot clean
- Press and hold for 3 seconds to turn on/off the child lock
  Dock
- Press to return to dock
- Press any button to stop the robot during cleaning or docking.
  Note : Press any button to stop the robot during cleaning or docking.
- A1-1—Vertical Bumper
- A1-2—Microphone
- For use with Video Calls
  Note: Only available in the Roborock app.
- A1-3—Status Indicator Light
  White : Vacuuming
  Blue: Vacuuming and Mopping
  Orange: Alert
  Green: Docking/Recharging
- A1-4: Wall Sensor
- A1-5: Bumper
- A1-6: Charging Contacts
- A1-7 : ReactiveAI Obstacle Recognition
- A1-8: LED Fill Light
Robot (Bottom View)
A2-1 : Cliff Sensors
A2-2: Carpet Sensor
A2-3 : Omni-Directional Wheel
A2-4: Charging Contacts
A2-5 : Side Brush
A2-6: Main Wheel
A2-7 : Main Brush
A2-8: Main Brush Cover Latches
Robot (Upper Cover Open)
A3-1 —WiFi Indicator Light
- Off: WiFi disabled
- Flashing slowly: Waiting for connection
- Flashing quickly : Connecting
- Steady : WiFi connected
  A3-2: Reset Button
  A3-3: Air Inlet
  Note: Remove this piece if using the Roborock Auto-Empty Dock or Empty Wash Fill Dock. Available for purchase separately. Visit www.roborock.com for details.
  A3-4: LiDAR Sensor
  A3-5: Mop Wash Sensor
  A3-6 : Water Tank Latch
  A3-7: Positioning Button
  A3-8 : Water Tank
  A3-9 : VibraRise Module
  A3-10: Air Outlet
Dustbin
A4-1 : Filter Cover
A4-2 : Dustbin Latch
A4-3 : Cover Latch
A4-4 : Air Inlet
A4-5 : Washable Filter
Charging Dock
A5-1:** Power Indicator
A5-2 : Dock Location Beacon
A5-3 : Charging Contacts
A5-4 : Power Socket
A5-5 :** Electrode Brushes
Power Cable
Electric Water Tank
A7-1 : Stopper
A7-2 : Water Filter
A7-3 : Water Tank Latch
A7-4: Self-Filling Port
VibraRise Mop Bracket
A8-1 : Vibration Module
A8-2 : Mop Cloth Attachment Slot
A8-3 : Mop Bracket Latch
VibraRise Mop Cloth
A9-1: Hook and loop pads
Moisture-proof Mat

Installation

Important Information

Tidy cables and loose items from the ground and move any unstable, fragile, precious, or dangerous items to prevent personal injury or property damage due to items becoming tangled in, struck by, or knocked over by the robot.
When using the robot in a raised area, always use a secure physical barrier to prevent accidental falls that may result in personal injury or property damage.
Note : When using the robot for the first time, follow it throughout its whole cleaning route and watch for potential problems. The robot will be able to clean by itself in future uses.

Position the charging dock
Keep the Charging Dock on a level surface, flat against a wall. Connect the power cable to the Charging Dock and tidy cables from the floor. To ensure a better user experience of the mobile app, place the Charging Dock in an area with good WiFi coverage.

B1-1 More than 0.5m (1.6ft)
B1-2 More than 1.5m (4.9ft)
Notes:

Allow at least 0.5 m (1.6 ft) of clearance on each side, and more than 1.5 m (4.9 ft) in front of the Charging Dock.
If the power cable hangs vertical to the ground, it may be caught by the robot, causing the Charging Dock to be
disconnected.
The Charging Dock indicator is on when the Charging Dock is electrified, and off when the robot is charging.
Do not place the Charging Dock in places that are directly exposed to sunlight, or block the Location Beacon.
Otherwise the robot may not be able to automatically return to the Charging Dock.

Secure the charging dock with the adhesive tape
Wipe the floor of the area where the charging dock will be placed with a dry cloth, then secure the dock in place using double sided tape at the bottom of the dock.
Notes :

Use of the double-sided tape to secure the charging dock is optional.
When necessary, remove the double-sided adhesive tape slowly to reduce residue glue.

Attach the Moisture Proof Mat
After fixing the Charging Dock in place, use a dry cloth to clean the area where the Moisture-Proof Mat will be located. Slot the mat onto the dock as shown. The teeth will click in place to attach.

Notes :

Always place the Moisture-Proof Mat on wooden floors.
The Moisture-Proof mat attaches best to smooth surfaces.

Power on and charge the robot
Press and hold the button to power on the robot. When the power light goes on, place it on the dock to charge. To maintain the performance of the high- performance lithium-ion rechargeable battery pack, keep the robot charged.

Note :The robot may not turn on when the battery is low. In this case, place the robot directly onto the dock to charge.

Mopping

Note : To prevent excessive dirt buildup during first-time use, floors should be vacuumed at least three times before mopping.

B4-1—Remove the water tank
Press the water tank latch and slide the tank backwards.

B4-2—Fill the water tank
Remove the water tank stopper, fill the tank with water, and close it tightly.

Notes :

To prevent corrosion or damage, only use the Roborock branded floor cleaner in the water tank.
Do not use hot water as this may cause the tank to deform.

B4-3—Reinstall the water tank
Slide the water tank into the robot until you hear it lock with a click.

B4-4—Install the VibraRise mop cloth
Dampen the mop cloth and wring it until it stops dripping. Insert it into the bottom along the attachment slot and stick it firmly in place.

B4-5—Install the mop bracket
Slide the bracket forwards under the water tank. A click indicates that it is locked in place.

B4-6—Remove the mop bracket
When the robot returns to the dock after cleaning, press the latches on both sides, and slide the mop bracket backwards to remove it.

Notes :

Wash the VibraRise mop cloth after each use, and regularly empty the water tank of unused water.
Remove the mop bracket when not mopping. The water tank can stay in place.

B4-7— WARNING
Risk of injury. Do not place your finger between VibraRise mop bracket and water tank.

Connecting to the App

This robot supports both Roborock and Mi Home apps. Choose the one that best meets your needs.

Download App
Option 1: Search for “Roborock” in the App Store or Google Play or scan the QR code to download and install the app. Option 2: Search for “Mi Home” in the App Store or Google Play or scan the QR code to download and install the app.
Reset WiFi
- Open the top cover and find the WiFi indicator.
- Press and hold the and buttons until you hear the “Resetting WiFi” voice alert. The reset is complete when the WiFi indicator flashes slowly. The robot will then wait for a connection.
  Notes :
- If you cannot connect to the robot due to your router configuration, a forgotten password, or any other reason, reset the WiFi and add your robot as a new device.
- After resetting the WiFi, the robot will activate its WiFi hotspot and camera for network configuration. The camera is used for QR Code scanning purposes in the Roborock app. Information obtained by the camera will neither be saved onboard nor transmitted to a server. Once connected successfully or if a QR code is not scanned within 5 minutes, the camera will automatically turn off.
Add device
Open the Roborock App, tap the “Search for device” button, or open Mi Home app, tap “+” in the top right corner and add the device as instructed in the app.
Notes:
- The actual process may vary due to ongoing app updates. Follow the instructions provided in the app.
- Only 2.4 GHz WiFi is supported.
- If the robot waits more than 1 hour for a connection, WiFi will be automatically disabled. If you want to reconnect, reset the WiFi before proceeding.

Instructions

On/Off
Press and hold the button to turn on the robot. The power indicator will turn on and the robot will enter standby mode. Press and hold the button to turn off the robot and complete the cleaning cycle.
Note : The robot cannot be turned off when it is being charged.

Starting Cleaning
Press the button to start cleaning. The robot will plan its cleaning route according to its scan of the room. It splits a room into zones, first draws out zone edges, and then fills the zone in a zigzag pattern. In so doing, the robot cleans all zones one by one, efficiently cleaning the house.

Notes :

To allow the robot to automatically vacuum and return to the dock, start the robot from the dock. Do not move the dock during cleaning.
Cleaning cannot start if the battery level is too low. Allow the robot to charge before starting cleanup.
If cleaning is completed in less than 10 minutes, the area will be cleaned twice.
If the battery runs low during the cleaning cycle, the robot will automatically return to the dock. After charging, the robot will resume where it left off.
When the mop bracket is attached, the robot will retract it when cleaning the carpet. You can also set the carpet as a no-go zone in the app to avoid it.
Before starting each mopping task, make sure that the VibraRise mop has been properly installed.

Spot Cleaning
Press the button to start spot cleaning. Cleaning range: The robot cleans a 1.5 m (4.9 ft) x 1.5 m (4.9 ft) square area centered on itself.
Note : After spot cleaning, the robot will automatically return to the starting point and enter Standby mode.

Pause
When the robot is running, press any button to pause it, press the button to resume cleaning, press the button to send it back to the dock.
Note : Placing a paused robot on the dock manually will end the current cleanup.

Refilling the Water Tank or Cleaning the VibraRise Mop Cloth
To add water or clean the VibraRise mop cloth, press any button to stop the robot and remove the mopping module. After adding water or cleaning the VibraRise mop cloth, reinstall the mopping module and press the button to continue.

Sleep
If the robot is paused for over 10 minutes, it will go to sleep, and the power indicator will flash every few seconds. Press any button to wake the robot up.
Notes :

The robot will not go to sleep when it is charging.
The robot will automatically shut down if left in sleep mode for more than 12 hours.

DND Mode
The default Do Not Disturb (DND) period is from 22:00 to 08:00. You can use the app to disable the DND mode or modify the DND period. When DND mode is activated, the robot will not automatically resume cleanup, the power indicator light will dim, and the volume of the voice prompts will lower.

Child Lock
Press and hold the button to enable/ disable the child lock. You can also set it in the app. Once enabled, the robot will not react to button presses when it is stationary. When the robot is cleaning or docking, press any button to stop it.

Charging
After cleaning, the robot will automatically return to the dock to charge. In Pause mode, press the button to send the robot back to the dock. The power indicator will pulse as the robot charges.
Note : If the robot fails to find the dock, it will automatically return to its starting location. Place the robot on the dock manually to recharge.

Error
If an error occurs, the power indicator will flash red and a voice alert will sound. See “Errors” for solutions.
Notes :

The robot will go to sleep automatically if left in a malfunctioning state for over 10 minutes.
Placing a malfunctioning robot on the dock manually will end the current cleanup.

System Reset
If the robot does not respond when a button is pressed or cannot be turned off, reset the system. Press the Reset button,
and the robot will reset automatically.
Note : After resetting the system, scheduled cleaning, WiFi, etc. will be restored to factory settings.

Restore Factory Settings
If the robot does not function properly after a system reset, switch it on. Press and hold the button and at the same time press Reset button until you hear the “Restoring factory settings” voice prompt. The robot will then be restored to factory settings.

App Features

Cleaning Map

Multi-map management
Real-time vacuum and mop route
Carpet display
Map zoning
Map editing

Custom Cleaning Modes

Scheduled
Selective Room
Zone
No-Go Zones, No-Mop Zones, and
Invisible Wall
Custom
Carpet Boost

Cleaning Mode Switch

Suction Power Levels
Mop Intensity Levels

Robot Information

Cleaning History
Battery Level
Care & Maintenance

More Features

Firmware Update
Video Call
Note: Only available in the Roborock app.
Volume Adjustment
Language Selection
Do Not Disturb Mode
Voice Assistant Support
Note : Functions and details of the app may vary slightly due to the continuous app development and updates.

Routine Maintenance

Main Brush
Clean every 2 weeks and replace every 6-12 months.

C1-1: Main Brush Cover
C1-2: Latches
C1-3: Main Brush
C1-4: Main Brush Caps
C1-5: Main Brush Bearing
C1-6: Turn over the robot and press the latches to remove the main brush cover.
C1-7: Pull out the main brush and remove the main brush bearing.
C1-8: Rotate the main brush caps in the indicated unlock direction to remove the caps.
C1-9 : After removing the tangled hair or dirt at both ends of the main brush, reinstall it, press on the main brush cover to lock it in place.

Notes :

Main brush should be wiped down with wet cloth and left to dry away from direct sunlight.
Do not use corrosive cleaning fluids or disinfectants to clean the main brush.

Side Brush
Clean monthly and replace every 3-6 months.

Unscrew the side brush screw.
Remove and clean the side brush. Reinstall the brush and tighten the screw.

Omni-Directional Wheel
Clean as required.

C3-1 : Use a tool, such as a small screwdriver, to pry out the axle and take out the wheel.
Note: The omni-directional wheel bracket cannot be removed.
C3-2: Rinse the wheel and the axle with water to remove any hair and dirt. Dry and reattach the wheel, pressing it firmly in place.

Main Wheels
Clean monthly.
Clean the main wheels with a soft, dry cloth.

Dustbin
Clean as required.

C5-1 : Open the top cover of the robot and take out the dustbin.
C5-2: Open the dustbin cover and remove the filter, then empty the dustbin.
C5-3: Fill the dustbin with clean water and close the cover. Gently shake the dustbin, and then pour out the dirty water.
Note : To prevent blockage, only use clean water without any cleaning liquid.
C5-4: Leave the dustbin and the washable filter to dry.

Washable Filter
Clean every 2 weeks and replace every 6-12 months.

C6-1: Open the filter cover and remove the filter.
C6-2 : Rinse the filter repeatedly and tap it to remove as much dirt as possible.
Note: Do not touch the surface of the filter with your hands, brush, or hard objects to avoid potential damage.
C6-3: Allow 24 hours for the filter to dry thoroughly and reinstall it.
Note : Purchase an additional filter and alternate if necessary.

Water Tank
Clean as required.

C7-1 : Open the water tank and fill it with clean water.
C7-2: Close the water tank and shake it gently.
C7-3 : Pour out the remaining water as shown.

VibraRise Mop Cloth
Clean after each use and replace every 3-6 months.

C8-1: Remove the VibraRise mop cloth from the VibraRise mop bracket. Clean the VibraRise mop cloth and air-dry it.
Note: A dirty VibraRise mop will affect the mopping performance. Clean it before use.

Robot Sensors
Clean monthly.
Use a soft, dry cloth to wipe and clean all sensors, including:

C9-1: Reactive AI Obstacle Recognition
C9-2: Wall Sensor
C9-3: Mop Wash Sensor
C9-4: Carpet Sensor
C9-5: Cliff Sensors

Charging Contact Areas
Clean monthly.
Use a soft dry cloth to wipe the charging contacts on the charging dock and the robot.

Battery
The robot is equipped with a built-in high-performance lithium-ion rechargeable battery pack. To maintain battery performance, keep the robot charged during normal use.
Note : If the robot will be left unused for a long period, turn it off and charge it at least every three months to avoid battery damage caused by over-discharge.

Basic Parameters

Robot
Note: The serial number is on a sticker on the underside of the robot.

Charging Dock

Errors
If an error occurs while the robot is cleaning, the power indicator will flash red quickly, and a voice alert will sound. Refer to the following table for troubleshooting.

After resolving any of the following errors, relocate your robot and restart cleaning.
After any sensor errors, clean the sensor and retry.
If the battery is at an abnormal temperature, wait for it to return to normal before use.

Note : A system reset may resolve some problems.
If the problem persists after using the recommendations in the table above, contact our support team at:
support@roborock.com (United States/Canada/Non- Europe)
1-855-960-4321 (United States only)
1-833-421-1915 (Canada only)

Common Issues

roborock 6970995784602 S7 MaxV Plus Robot Vacuum Cleaner
15