HEXGEARS X5 Wireless Mechanical Keyboard User Guide

X5 Wireless Mechanical Keyboard

“`html

Product Information

Specifications:

• Model: XK2109(X5) 42XK2109006
• Weight: 80g
• Dimensions: 130x105mm
• Keys: 16
• Color: 2C

Product Usage Instructions

1. Assembly and Disassembly of Keyboard Hand Rest:

Assembly Instructions:

Grasp the middle end of the hand rest and align it with the
keyboard lock slot. Push it in slightly until you hear a click to
lock it in place.

Disassembly Instructions:

Grasp the middle of the hand rest, push it forward slightly, and
then quickly pull it out after hearing a click to remove the hand
rest.

2. Installation Instructions:

Wireless Mode:

1. Turn on the power switch on the back of the keyboard.

2. Take out the 2.4G wireless receiver.

3. Insert the USB connector into the USB port of the
   computer.

4. Plug the receiver into the USB port of the computer.

Wired Mode:

1. Connect the TYPE-C of the data cable to the keyboard.

2. The system will automatically detect and install the device for
   use after successful connection.

3. For optimal wireless performance, place the USB wireless
   receiver closer to the keyboard using a front panel USB port or USB
   extension cord.

3. FN Combination Function Keys:

Detailed instructions on various function keys for volume
control, Win lock, anti-ghosting, media controls, backlight modes,
custom lighting, and backlight brightness adjustments.

4. Charging Instructions:

The USB cable charges automatically when connected to a
computer. The Fn key light flashes during charging and follows the
current light mode when fully charged. In wireless mode, low
battery prompts with Fn key light flashing; connect for
charging.

Frequently Asked Questions (FAQ):

Q: How do I reset the keyboard to factory default

settings?

A: Keep pressing the ‘3S’ key combination to restore factory
default settings.

“`

XK2109(X5) 42XK2109006 80g+ 130x105mm 16 2C

Quick Start Guide X5 WIRELESS MECHANICAL KEYBOARD

1. Product introduction
The user interface and other illustrations of the product accessories in the manual are all schematic diagrams, which are only for reference. Due to the update and upgrading of the product, the actual product may be slightly different from the schematic diagram. Please refer to the actual product.
“One-key double Function”key(Fn combination key) Self-locking hand rest Fn Key USB cable Tripod Type – c interface
Receiver
Power switch

2. Schematic diagram of assembly and disassembly for keyboard hand rest

Assembly instructions of keyboard hand rest
1. Grasp the middle end of the hand rest and align it with the keyboard lock slot, push it in slightly, and hear a “click”. Indicates that the keyboard has been locked.

Disassembly instructions of keyboard hand rest
1. Grasp the middle of the hand rest and push it forward slightly, and then quickly pull it out after hearing a “click”. Remove the hand rest.

2. The effect of Complete assembly.

2. The effect of complete disassembly.

3. Installation instructions
2.4G mode 1. Turn on the power switch on the back of the keyboard

Wired mode 1. Connect the “TYPE-C” of the data cable to the keyboard.

2. Take out the 2.4G wireless receiver

2. Insert the USB connector into the USB port of the computer.

3. Plug the receiver into the USB port of the computer
After connecting to the computer, the system automatically detects the 2.4G device and installs it by itself. It can be used after the installation is successful.

After connecting to the computer, the system will automatically detect the USB device and install it by itself.After successful installation, the user will be prompted to use the current device.

For good 2.4g wireless performance, plug the USB wireless receiver into the USB port on the PC front panel or connect through a USB extension cord to bring the USB wireless receiver closer to the keyboard.

4. FN combination function keys

Keep pressing 3S to restore factory default
Volume –

Win lock Volume +

Full key / 6 key anti-ghosting (cable model
Mute

Prev song

Play / Pause

Next song

Backlight interactive mode cycle switch

Backlit breathing mode

backlight constant brightness mode

Custom light clearing (long press 3 seconds)

Custom light mode

Full light switch

Custom lighting mode: Short press FN + END to call up the current custom light, then long press FN + END 3S function indicator and the END key to flash, and enter the custom light effect mode. At this time, press the key that needs to be set to modify the on-off and on-off status of the corresponding LED, and press FN + END to save and exit.

Adjust the backlight brightness – brighter
Adjust the speed of backlight change – fast

Adjust the backlight brightness – dimming
Lock all keys

Adjust the speed of backlight change – slow
When the keyboard is locked, the “F12” button light is flashes

5. Charging instructions
The USB cable will automatically charge when connected to the computer. The “Fn key” light flashes when charging, and the “Fn key” light follows the current light mode when fully charged. In wireless mode, if the battery is low, the “Fn key” light will flash, please connect to the USB cable for charging.

6. Basic specifications
Keyboard type: Dual-mode mechanical keyboard Switch: Kailh upgrade BOX Switch ( Hexgears custom-made ) Switch life: 100 Million Cycles Report Rate: 1000HZ ( Wired mode ) Backlight: Monochromatic

Function: FN combination function key Attended mode: 2.4G / Wired Voltage / Current: 3.7V / 300mA Keypad: 108 key/Anti-ghosting ( Wired mode ) Supporting: Windows all/Mac OS/Android

Battery capacity: 2300mah Cable Material: USB Cable braided wire Size: 445 x 135 x 37 mm Weight: 1150g

7. The name and content of the hazardous substance in the product

Component

name

(Pb)

keyboard body Metal case Plastic keys

Hazardous substances (Hg) (Cd) (Cr(VI)) (PBB) (PBDE)

This form has been prepared in accordance with the requirements of SJ/T 11364.
O : Indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit specified in GB/T 26572.
X : Indicates that the hazardous substance is contained in at least one homogeneous material of the component. The quantity exceeds the limit specified in GB/T 26572.

8. Warning
If any liquid enters the product , please immediately disconnect from the computer and remove the product. Continued use may cause fire or electric shock, please contact the agent for inspection and maintenance.
Check the product shell regularly for any damage, maintenance operations are outside the scope of product compliance requirements.
Disassembly, replacement of parts , modification or modification without express approval will cause the user to lose the right of operating the equipment and the warranty failure.

1. , ,
   “”Fn Fn USB Type-c

2. 1. “”

1. “”

3. 2.4G 1.

1. “TYPE-C”

2. 2.4G

2. USBUSB

3. USB
2.4G, ,

USB

2.4G USB PC USB USB USB

4. FN
3S

WIN

/6 (

/

(3)

Fn+End Fn+End 3S End LEDFn+End

– –

–

–

“F12″

5. USB”Fn””Fn” “Fn”USB

6. BOX 1 1000HZ (

FN 2.4G / /3.7V / 300mA 108 / Windows all/Mac OS/Android

2300mah USB Cable 445 x 135 x 37 mm 1150g

(Pb)

(Hg)

(Cd)

(Cr(VI)) (PBB)

(PBDE)

SJ/T 11364
O : GB/T 26572
X : GB/T 26572

8. , , ,

FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>