HEXGEARS X3 Wireless Mechanical Keyboard User Guide

HEXGEARS X3 Wireless Mechanical Keyboard User Guide

www.hexgears.com

1. Product introduction

The user interface and other illustrations of the product accessories in the manual are all schematic diagrams, which are only for reference. Due to the update and upgrading of the product, the actual product may be slightly different from the schematic diagram. Please refer to the actual product.

2. Schematic diagram of assembly and disassembly for keyboard hand rest

3. Installation instructions

4. FN combination function keys

Custom lighting mode: Short press FN + END to bring up the current custom light, and then long press FN + END 3S indicator lights CAPS and SCRLK and the END button to flash, then enter the custom light effect mode. At this time, press the required key to modify the on-off and on-on status of the corresponding LED, and press FN + END to save and exit.

5. Charging instructions

The USB cable will automatically charge when connected to the computer. The “Fn key” light flashes when charging, and the “Fn key” light follows the current light mode when fully charged. In wireless mode, if the battery is low, the “Fn key” light will flash, please connect to the USB cable for charging.

6. Basic specifications

• Keyboard type: Dual-mode mechanical keyboard
• Switch: Kailh upgrade BOX Switch ( Hexgears custom-made )
• Switch life: 100 Million Cycles
• Report Rate: 1000HZ ( Wired mode )
• Backlight: Monochromatic
• Function: FN combination function key
• Attended mode: 2.4G / Wired
• Voltage / Current: 3.7V / 300mA
• Keypad: 87 key/Anti-ghosting ( Wired mode )
• Supporting: Windows all/Mac OS/Android
• Battery capacity: 2300mah
• Cable Material: USB Cable braided wire
• Size: 357 x 133 x 37 mm
• Weight: 920g

7. The name and content of the hazardous substance in the product

This form has been prepared in accordance with the requirements of SJ/T 11364.
O : Indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit specified in GB/T 26572.
X : Indicates that the hazardous substance is contained in at least one homogeneous material of the component. The quantity exceeds the limit specified in GB/T 26572.

8. Warning

If any liquid enters the product , please immediately disconnect from the computer and remove the product. Continued use may cause fire or electric shock, please contact the agent for inspection and maintenance.
Check the product shell regularly for any damage, maintenance operations are outside the scope of product compliance requirements.
Disassembly, replacement of parts , modification or modification without express approval will cause the user to lose the right of operating the equipment and the warranty failure.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>