Tomauri IST-51206 TWS Bluetooth Earbuds Instruction Manual
- June 17, 2024
- Tomauri
Table of Contents
Tomauri IST-51206 TWS Bluetooth Earbuds
Product Description
- Multi-function touch button
- Earbud indicator/microphone
- Charging case LED indicator
- Type-C USB charging port
Power on/off
Auto power on: Take it out of the charging box and power it on
automatically.
Auto power off: Put it into the charging box and shut down automatically.
Manual power off: When the phone is not connected, press and hold the
touch key for 5s to shut down manually.
Note: If it is not connected to any device or without any operation
during connection within 5 minutes, it will automatically shut down.
Bluetooth pairing
-
Open the charging case and take out the earbud to turn it on automatically.
-
After turning on, put the left and right earphones close to each other. Earbuds would pair automatically. After the team pairing is successful, it enters searching mode. The indicator light shows that one earbud flashes red and blue lights alternately, and the other has no light.
No lighting effect
Red and blue lights Alternate flashing
- Open the phone’s Bluetooth connection interface, search for “IST-51205 / IST-51206” GDA889AW,GDA889AK, click pair then the connection is successful and accompanied by a tone.
Music
> Music pause/play: During playback, double click the multi-touch button.
> Previous song: Long press left earbud multi-function touch button for
2s.
> Next song: One click the right earbud multi-function touch button for
2s.
> Volume +: One click the right earbud multi-function touch button.
> Volume +: One click the left earbud multi-function touch button
Wake up voice assistant function (requires mobile phone support)
After successfully connecting with the mobile phone, except during a call, click the multi-function touch key three times to activate the voice assistant function (SIRI).
Call
Answer: When a call comes in, one click the multi-function touch
key.
> Reject: When there is an incoming call, press and hold the multi-
function button for 2 seconds.
> Hang up: During a call, double click the multi-function touch key
Charging
Charging the Earbuds:
Put earbuds into the charging case, it starts charging and its LED indicator
stays red light on.
After fully charged, LED indicator shows blue light for 1s and then off.
Charging the Charging Case:
Charging the charging case by connecting the charging port by our standard
Type C charging cable. When charging, LED indicator flashes red light After
fully charged, LED indicator stays red light on.
Specifications
Model:IST-51205 / IST-51206 GDA889AW,GDA889AK
Bluetooth Solution: 6973D4
Bluetooth Version: 5.3
Supported Agreement: A2DP, AVCTP, AVDTP, AVRCP, HFP, SPP
Frequency: 2.402GHz~2.480GHz
Bluetooth Distance: 10m
Speaker Type: 13mm, 32ῼ
Earbuds Battery Capacity: 25mAh/3.7V *2
Charging Case Battery Capacity: 300mAh/3.7V
Product Size:494725mm,
Weight: 39g
IC Caution:
This device complies with Industry Canada licence-exempt RSS standard(s) Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.