ScanAvenger SA9200 Wireless Bar Code Scanner User Guide

SA9200 Wireless Bar Code Scanner

“`html

Specifications:

• Scanner type: CMOS

• Light source: White LED 625NM

• Wireless: 2.4Ghz = 150 meters, Bluetooth Distance 30 meters
  (open distance)

• Storage: 16Mb (over 100,000 Product codes)

• Battery Capacity: 2000 mAh

• Charging time: Approx. 3 hours

• Continuous Working time: 15 hours

• Communication: USB, Wireless 2.4G, Wireless

Product Usage Instructions:

Connecting the Scanner using a USB Wireless Dongle:

1. Power the scanner by pressing the button.
2. Insert the USB Dongle into a USB port on the computer.
3. Wait 30 seconds for devices to pair automatically.

Connecting the Scanner via Bluetooth:

1. 1. Scan:

[Barcode for Bluetooth connection]

Troubleshooting Steps for Connecting Scanner to Wireless USB

Dongle:

1. 1. Unplug USB Dongle.

2. Scan the below barcode:

[Barcode for troubleshooting]

1. 1. Scan below barcode:

[Barcode for pairing]

1. 1. Plug the USB Dongle back into the computer.

A blue light on the scanner should be turned on, indicating the
scanner is connected to the dongle.

To test, open a Word document or notes and try scanning a normal
barcode (not a configuration barcode from the user guide).

FAQ:

Q: What should I do if my scanner stops working after

accidentally scanning configuration codes?

A: Please email us at helpdesk@scanavenger.com for the full
reset process.

Q: Can I use Fast Charging AC adapters to charge the

scanner?

A: No, please avoid using Fast Charging AC adapters as it may
shorten the lifespan of the built-in battery.

Q: How can I know the status of the scanner based on LED and

Buzzer indicators?

A: Refer to the LED & Buzzer STATE DESCRIPTION section in
the manual for detailed information on the LED and Buzzer
states.

“`

Troubleshooting your scanner
Some barcode types are disabled by default. For more information, please refer to the Full User Manual or email us at helpdesk@scanavenger.com
Scan in your browser for the full user
manual
To correctly use the barcode scanner, please read the instructions carefully. It is advisable to keep this manual for future reference.
If at any stage you accidentally scan configuration codes and the scanner stops working, please email us at helpdesk@scanavenger.com for the full reset process.
Important Note:
Please don’t use Fast Charging AC adapters to charge your scanner, as this may shorten the lifespan of its
built-on battery.

Led & Buzzer STATE DESCRIPTION

LED Light

Description

Blue LED ON…………… Scanner ON and paired
Red LED ON……………………. Charging No light ON…………..Scanner not paired to any
device

Buzzer

Description

A long beep —————————– Power ON/OFF

A short beep ————- Scan common barcode, paired

(low frequency)

or wireless connection success

5 short beeps ——————— Battery without electricity (low frequency) and stop scanning

3 short beeps ———————– Wireless disconnected (low frequency)

No part of this publication may be reproduced or distributed in any form without written permission
from ScanAvenger.
ScanAvenger reserves the right to make the final interpretation of the above statement.
If you come across any issues with your product, please contact us via email at helpdesk@scanavenger.com
When contacting our helpdesk, please make sure you mention your order number and scanner model.

Scanner type CMOS Light source White LED 625NM
CPU 32-bit Resolution 640*480 Resolution 1D3mil, 2D8.7mil@PCs90% Decoding speed 25CM/S Depth of field 10mm-500mm Scan mode Manual, Auto Sense Scan angle Roll ±360°, Pitch ±60°, Skew Print contrast ±70° 25%
Wireless 2.4Ghz = 150meters, Bluetooth Distance 30meters (open distance) Storage 16Mb (over 100,000 Product codes) Battery Capacity 2000 mAh Charging time Approx. 3 hours Continuous 15 hours Working time Communication USB, Wireless 2.4G, Wireless
Bluetooth 4.2 Power supply DC 5V@200mA (work) Operating temp 0° C to 50° C
Storage -30° C to 60° C Humidity 5% to 95% (non-condensing) Drop Height 1.5mCE Certificate FCC, RoHS
For an extended user manual or any questions please email us at helpdesk@scanavenger.com

How to connect the scanner using a USB Wireless Dongle: 1. Power the scanner by pressing the button. 2. Insert the USB Dongle into a USB port on the computer. 3. Wait 30 seconds for devices to pair automatically.

How to connect the scanner via Bluetooth to a mobile phone, tablet, or other Bluetooth devices: 1. Scan:

For any issues connecting the scanner to the Wireless USB Dongle please follow the below troubleshooting steps:

Bluetooth Mode

1. Unplug USB Dongle

2. Scan the below barcode: 2. Scan:

2.4G Mode – laptop/computer
3. Scan below barcode:
Pair with dongle 4. Plug the USB Dongle back into the computer and you are Done. A blue light on the scanner should be turned on indicating the scanner is connected to the dongle. * If the scanner is in Bluetooth Mode and you want to revert back to the previously connected dongle, all you need to do is scan the 2.4G Mode barcode above.
To test, open a Word document or notes and try scanning a normal barcode (not a configuration barcode
from the user guide). If you have any questions about setting up or configuring the scanner please email us at
helpdesk@scanavenger.com Our helpdesk operates 24/7 – 365 days a year.

Pair with Bluetooth
3. Scanner light will be flashing blue. This means you can connect it to your mobile device. On your mobile/tablet go to Bluetooth devices, search for “ScanAvenger HID” and click PAIR.
4. Scanner light will turn solid blue indicating the scanner is connected to your device. Remember you can turn ON/OFF your mobile phone/tablet keyboard by double tapping the scanner button.

• If the scanner is in Dongle Mode and you want to revert back to a previously connected Bluetooth device, all you need to do is scan the Bluetooth Mode barcode above. ** If for whatever reason you are having Bluetooth connectivity issues, we recommend you remove the scanner from your Bluetooth devices on your mobile and go through the above steps again. *** For Bluetooth SPP and BLE Modes, please contact us at helpdesk@scanavenger.com

To test, open a Word document or notes and try scanning a normal barcode (not a configuration
barcode from the user guide) If you have any questions about setting up or configuring the scanner please email us at
helpdesk@scanavenger.com Our helpdesk operates 24/7 – 365 days a year.
SLEEP TIME SETTINGS
Sleep Interval 5min
Sleep Interval 30min (DEFAULT)
Never Sleep
Sleep Immediately For an extended user manual or any questions please
email us at helpdesk@scanavenger.com

SOUND SETTINGS
Turn sound off
Low volume
Medium volume

If the barcode scanner works beyond the transmission range, it is recommended to use storage mode.
In storage mode, the scanned data is stored in the internal memory of the scanner automatically.
To enter Storage Mode, scan the below barcode: Storage Mode

Note: Please ensure that the wireless signal connection is good when the data is uploading. Data can also be uploaded by using the cable.
By scanning the “clear data” barcode you will remove any barcodes stored in the memory of the scanner.
Please make sure you upload the barcodes first before clearing the data on the scanner.

THE PREVIOUS ONLY RESETS WIRELESS PARAMETERS. IF YOU WISH TO FULLY RESET THE SCANNER TO FACTORY
SETTINGS please email us at helpdesk@scanavenger.com to receive details on how to do this. It takes only 20
seconds to reset. Enable / Disable all the 1D Barcodes

If you want to revert to normal mode, scan the below barcode
Normal Scan Mode
By scanning “Sum Data” barcode, you can check the number of barcodes stored in the internal memory of the
scanner
Sum Data

Clear Data Trigger Modes There are two different trigger modes 1. Manual Trigger
2. Sense Mode

Enable all the 1D Barcode Types
Disable all the 1D Barcode Types Enable / Disable all the 2D Barcodes

Hidden Character Settings This product supports hiding multiple characters. We
have included hiding up to 4 characters. If you wish to hide more please contact us. 1. Select if you wish to hide characters from the
front or back of the barcode:
Hide Front of Barcode Digits (read same barcode to revert to normal)
Hide Back of Barcode Digits (read same barcode to revert to normal)
2. Select how many characters you wish to hide (scan only 1 barcode)
Hide 1 Bit

High volume
For an extended user manual or any questions please email us at helpdesk@scanavenger.com

To upload the stored data, scan the “Data Upload” barcode. Data Upload
For an extended user manual or any questions please email us at helpdesk@scanavenger.com

If at any stage you accidentally scan configuration codes and the scanner stops working, please scan the
below “Restore Wireless Parameters” code to reset all wireless configurations to default settings.
Restore Wireless Parameters

Enable all the 2D Barcode Types
Disable all the 2D Barcode Types if you wish to enable/disable specific barcode types email
us at helpdesk@scanavenger.com for details.

Hide 2 Bits
Hide 3 Bits
For an extended user manual or any questions please email us at helpdesk@scanavenger.com

Frequently Asked Questions 1. Can it automatically open a website page, after scanning a QR Code? The basic idea is that the scanner acts as an automatic keyboard. You have to click where you want the data to be written. Each time you scan a barcode, it will transmit the data as if you would be typing on a keyboard. Your devices will recognize the scanner as a keyboard. Please note that this will not impact your keyboard’s functionality. 2. When trying to scan, my scanner makes multiples beeps, without outputting anything. Why does this happen? The number of beeps and the LED on the back of your scanner will help you identify why this is happening. The most common issues being:
· 3 beeps and flashing LED – your scanner is not connected to your device. To fix this, please follow the Dongle/Bluetooth Pairing from this Quick User Guide.
· 5 beeps and stops scanning (shuts down) – your scanner is out of battery. Please charge your scanner and try again.
3. Will ScanAvenger barcode scanners work with any Inventory Management Software? Your ScanAvenger barcode scanner will work with most Inventory Management Software. That being said, some Inventory Management Software developers restrict what barcode scanners will work. We recommend checking their website for more information.
If yo need any assistance, please do not hesitate to contact us at helpdesk@scanavenger.com

Wireless Barcode Scanner Quick Start Guide
V6.5 (M10)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>