WINGS VADER 100 Wired Gaming Over Ear Headset User Manual
- June 9, 2024
- WINGS
Table of Contents
WINGS VADER 100 Wired Gaming Over Ear Headset
INTRODUCTION
Welcome to the Wings Gaming Generation with the all-neW Wings Vader 100. We
hope you are as excited as us to feel and flaunt your latest sound wear. But
before you dive right in, we strongly recommend going through this user manual
thoroughly as it contains important technical information to ensure you have a
seamless audio experience with us. Once you are done reading the manual, we
are sure you will be all set to.
FEEL IT!
FLAUNT IT!
IN THE BOX
- Vader 1o0 Gaming Headset
- User manual
- Warranty Card.
VADER 100
- 40 mm Heavy bass driver offers top notch audio experience
- Soft Earmuffs, which are wear proof and comfortable to wear
- Omnidirectional microphone
- Volume Control Buttons and mic ON/OFF switch
- Single hole interface usage
- One-to-two interface usage
TECHNICAL SPECIFICATIONS
- Extra Soft Earmuffs
- Adjustable Headband
- Driver Diameter : 40 mm
- Impedance: 32 +15%
- Sensitivity: 103 t3dB
- Frequency Range: 2OHz-20 KHz
- Microphone: 6.0 * 5.0mm
- Microphone Sensitivity: -42+3 dB
- Microphone Impedance: 2.2K Q
- Cable Length: 1,8M t0.2
- Headset Jack: 3.5mm 4 pin
- Secured Braided Cable
INSTRUCTIONS FOR USAGE
- The headset is applicable to 3.5 mm single plug audio device such as mobile, laptops, tablets, and any other audio devices.
- Generally, the cable end or mic end is designed on the left side, so wear the cable end or mic end on the left ear when wearing the headset
- When using the headset on computer, please make sure the headset mic switch is turn ON then make sure the computer mic switch is turned ON. Please find the “speaker” icon in the computer task bar, and double click to enter the volume control for setting. And enter into the “voice” for setting on the ” Control Panel”
- Please make sure the headset volume adjustment button is at minimum volume and can be adjusted to the appropiate volume.
SAFETY AND MAINTENANCE
Please read below suggestions in order to helping prolong the product lifespan and clearly understand the warranty clauses:
- Keep the product dry, do not put it in humid conditions to avoid short circuits.
- Do not expose it to the peak sun or high heat for extended period of time as this will short the lifespan of electronic components, damage battery and deform some plastic parts.
- Do not put it in cold circumstances to avoid damage to PCB board.
- Do not attempt to dismantle the product, as it may be unsafe especially for non-professionals.
- Do not use chemical products, detergents, oily liquids to clean the item.
- Do not Scratch the surface with sharp items to avoid damaging the case and appearance.
- Avoid hearing music at maximum volume for long periods of time as this can affect your hearing and is not advisable.
- If disassembled the headset without authorization, we cannot guarantee the quality.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>