SCANAVENGER SA3600 Series Pro Scan Avenger Instruction Manual

SCANAVENGER SA3600 Series Pro Scan Avenger

Specifications

• Scanner Type: 1D & 1D&2D
• Connection : COM Port
• Operating System: Windows
• Driver: Virtual-COM-Port-Driver.exe

Product Usage Instructions

Setup

1. Download the COM Port Driver (Virtual-COM-Port-Driver.exe) using the provided link.
2. Ensure that the USB dongle is NOT connected.
3. Right-click on Virtual-COM-Port-Driver.exe and Run as Administrator to initiate the installation.
4. A confirmation message will appear, confirming the successful installation.
5. Proceed to scan the barcode provided in the manual for your scanner type:
   • The left barcode is for 1D scanners.
   • The right barcode is for 1D and 2D scanners.
6. Connect the USB dongle.
7. Windows will automatically recognize the scanner, and it will be visible in the Device Manager, under Ports.

Testing

1. Download and launch the Serial Command Assistant application.
2. Verify that the PortNum aligns with the one identified in the Device Manager.
3. Click on Open.
4. Scan a barcode (not a configuration code, this can be any product barcode as an example).
5. You’ll see your scanner’s output within the application’s DataLog.

FAQ

• Q : What should I do if my scanner is not recognized by Windows after following the setup steps?
• A : If your scanner is not recognized, try restarting your computer and ensuring that the USB dongle is securely connected. You can also check the Device Manager for any error notifications related to the scanner.
• Q : Can I use the scanner with a different operating system?
• A: This scanner is specifically designed for Windows operating systems. Compatibility with other operating systems is not guaranteed.

This guide provides step-by-step instructions on how to connect your ScanAvenger scanner using COM Port on Windows.

Setup

1. Download the COM Port Driver (Virtual-COM-Port-Driver.exe) using the provided link.
2. Ensure that the USB dongle is NOT connected.
3. Right-click on Virtual-COM-Port-Driver.exe and “Run as Administrator” to initiate the installation.
4. A confirmation message will appear, confirming the successful installation.
5. Proceed to scan the barcode below.
6. The left barcode is for 1D scanners.
7. The right barcode is for 1D and 2D scanners.
8. Connect the USB dongle.
9. Windows will automatically recognize the scanner, and it will be visible in the Device Manager, under Ports.

Additional Resources

• If you encounter any difficulties with these steps, we recommend watching our comprehensive step-by-step video.
• Alternatively, feel free to reach out to our support team at helpdesk@scanavenger.com for assistance.

Testing
Following the successful completion of the setup steps, you can verify the connection by conducting a test using the Serial Command Assistant application.

1. Download and launch the Serial Command Assistant application.
2. Verify that the PortNum aligns with the one identified in the Device Manager.
3. Click on “Open”
4. Scan a barcode (not a configuration code, this can be any product barcode as an example. You’ll see your scanner’s output within the application’s DataLog.V

References

• scanavenger.com/wp-content/uploads/manuals/Serial-Command-Asssitant.exe
• scanavenger.com/wp-content/uploads/manuals/Virtual-COM-Port-Driver.EXE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>