timberk T-SF1603 Stand Fan Instruction Manual

T-SF1603 Stand Fan

Product Information

The product is a stand fan with the model number T-SF1603. It comes with an instruction manual that is available in four languages – Russian, English, Ukrainian, and Kazakh. The fan has a label on it that contains all the necessary technical data and other useful information about the device. It is designed for air circulation in a room and has specific specifications as shown in Table 1.

Table 1: Specifications

Product Usage Instructions

1. Before connecting the appliance for the first time, check that the voltage indicated on the rating label corresponds to the mains voltage in your home.
2. Use the appliance only for the purpose specified in the instruction manual.
3. Do not use the appliance for any other purposes than described in this instruction manual.
4. The device is intended for air circulation in the room.
5. Place the stand fan in a suitable location, such as a corner or near an open window, so that it can circulate air effectively.
6. Connect the stand fan to a power source.
7. Use the controls on the fan to adjust the speed and direction of the airflow.
8. When not in use, turn off the fan and unplug it from the power source.

Following these instructions will ensure that you can use the stand fan safely and effectively for a long time.

Dear customer!
We thank you for your wise choice and for a purchase of a stand fan. It will serve you for a long time.

IMPORTANT INFORMATION

Please, read this manual before using the device. This manual contains important information regarding your safety, as well as recommendations concerning the correct use and maintenance of this appliance. Keep this manual together with a warranty card, cash register receipt and, if possible, carton and packaging material. This instruction manual describes different types of this device. The device you purchased may differ slightly from the description in the manual, which does not affect the methods of use and operation. The manufacturer reserves the right to make minor changes to the device without additional notice which is not fundamentally affect its safety, performance and functionality. There may be some misprints in text and digital notations in the present manual.

IMPORTANT!
Important safeguards and descriptions contained in this manual do not include all possible situations that you may experience using the device. The manufacturer is not responsible for damage of the appliance or its parts during transportation, as a result of incorrect installation or voltage fluctuations, as well as when any part of the appliance has been changed or modified.

NOTE
There is a label on the device which has all the necessary technical data and other useful information about the device. Use the appliance only for the purpose specified in this manual.

SAFEGUARDS

When using an electric stand fan, a number of safety precautions must be observed. Improper operation by ignoring safety precautions can result in damage to the health of the user and other people, as well as damage to their property.

• Important safeguards. read carefully and keep for future reference.
• Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.
• Before connecting the appliance for the first time check that voltage indicated on the rating label corresponds to the mains voltage in your home.
• For home use only. Do not use for industrial purposes. Do not use the appliance for any other purposes than described in this instruction manual.
• Do not use outdoors or in damp area.
• The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for person with lack of life experience or knowledge, if only they are under supervision or have been instructed about the use of the unit by responsible person.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given  supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.
• Children must be under control in order not to be allowed to play with the appliance.
• Always unplug the appliance from the power supply before cleaning and when not in use.
• To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has happened DO NOT TOUCH the appliance, unplug it immediately and check in a service center.
• Do not use the device in bathrooms and near water.
• Do not place the appliance near heat sources.
• Do not leave the appliance switched on when not in use.
• Do not use other attachments than those supplied.
• In case of power cord is damaged, its replacement should be done by the manufacture or service department or the other high-skill person to avoid any danger.
• Keep the cord away from sharp edges and hot surfaces.
• Do not pull, twist, or wrap the power cord around the appliance.
• Avoid contact with moving parts of the device. Do not put pencils or other objects through the protective grid of the fan.
• Do not operate without fan installed protective grid.
• Ensure that the fan is switched off from the supply mains before removing the guard.
• Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.
• If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on.
• The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.

APPOINTMENT OF THE DEVICE

The device is intended for air circulation in the room.

DEVICE DESCRIPTION

*The appearance of the device may differ from the images in the manual

1. Front grill
2. Blade cap
3. Blade
4. Rear grill
5. Rear grill nut
6. Oscillation knob
7. Rotary switch
8. Motor housing
9. Fan poleX3
10. Round base
11. Safety screw
12. Wall fan connector set

DELIVERY SET

1. Stand fan – 1 pc.
2. Instruction manual – 1 pc.
3. Warranty card – 1 pc.
4. Packing – 1 pc.

ASSEMBLE INSTRUCTION

1. Fasten the pole to the round base by turning clockwise. You can choose applicable numbers of poles at your desired height. Three poles will allow you to fix the fan at single/double/triple height.
2. Fix the motor housing by switching clockwise on to the pole.
3. Remove the rear grill retaining nut by rotating it anticlockwise.
4. Install the rear grill onto the chassis. Make sure that the protrusions on the body engine aligned with the holes in the grille. Secure the grill with the nut,turning it clockwise.
5. Install the blade on the motor shaft and fix it with the blade cap, turning it anticlockwise.
6. Join the front and rear grills together, align and secure with the safety screw.

WALL FAN ASSEMBLE INSTRUCTION

1. Fix the motor housing by switching clockwise on to one pole.
2. Remove the rear grill retaining nut by rotating it anticlockwise.
3. Install the rear grill onto the chassis. Make sure that the protrusions on the body engine aligned with the holes in the grille. Secure the grill with the nut,turning it clockwise.
4. Install the blade on the motor shaft and fix it with the blade cap, turning it anticlockwise.
5. Join the front and rear grills together, align and secure with the safety screw.
6. Fix the wall fan connector onto to wall by applying Wall plug X3+Screw X3 (Fixings not included ).
7. Place the fan on the connector, and fix the pillar with screw.

OPERATING INSTRUCTIONS

1. Select desired speed by switching the rotary switch on the motor housing. “OFF” Position [ 0 ], Low [ 1 ], Med [ 2 ], High [ 3 ]
2. Push down or pull up the Oscillating Control Knob located on the motor housing to control the oscillation function.

MAINTENANCE

1. Before cleaning unplug fan first.
2. Clean front and rear grilles, blades, stand tube and stand base with soft moistened cloth and wipe dry.
3. Do not use abrasive cleansers

STORAGE

• Keep the device in normal conditions in dry place.

UTILIZATION RULES

The symbol on the unit, packing materials and/or documentations means used electrical and electronic units should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point. For additional information about actual system of the garbage collection address to the local authority. Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage.

www.timberk.ru

References

• Timberk - Официальный сайт бренда бытовой техники
• Dictionary

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>