ScanAvenger SA1100 Wireless Bluetooth Barcode Scanners User Guide

ScanAvenger SA1100 Wireless Bluetooth Barcode Scanners

Product Specifications

• Wireless: 2.4GHz = 150 meters, Bluetooth distance 30 meters (open distance)
• Storage Battery: 16MB (over 100,000 product codes)
• Battery Capacity: 2200 mAh (1200 mAh for SA1100)
• Charging Time: Approximately 3 hours
• Continuous Working Time: 16 hours
• Communication: USB, Wireless 2.4G, Wireless
• Height: 1.5m CE, Certificate FCC, RoHS

Product Usage Instructions

Connecting the Scanner using a USB Wireless Dongle (2.4G Mode – laptop/computer):

1. Power the scanner by pressing the button.
2. Insert the USB dongle into the USB port of your device.
3. Wait 30 seconds for devices to pair automatically.

Connecting the Scanner via Bluetooth to a Mobile Phone, Tablet, or other Bluetooth Devices:

1. Scan the barcode for Bluetooth Mode.
2. On your mobile/tablet, go to Bluetooth devices, search for ScanAvenger HID, and click PAIR.

Troubleshooting Steps for Connecting the Scanner to the Wireless USB Dongle:

1. Unplug the USB Dongle.
2. Scan the barcode for 2.4G Mode – laptop/computer.
3. Pair with Bluetooth by following the on-screen instructions on your mobile device.
4. Plug the USB Dongle back into the computer and test again.

Led & Buzzer

Mini Scanner LED Light Smart Light Signaling

1. Small and Medium lights turn on when the scanner is on
2. A large light turns on when the scanner is connected.

Medium-light flashes once when successfully reading a barcode.

To correctly use the barcode scanner, please read the instructions carefully. It is advisable to keep this manual for future reference. No part of this publication may be
reproduced or distributed in any form without written permission from ScanAvenger.
ScanAvenger reserves the right to make the final interpretation of the above statement. If you come across any issues with your product, please contact us via email at helpdesk@scanavenger.com
When contacting our helpdesk please make sure to mention your order number and scanner model.

SPECIFICATION

• Scanner type: CMOS
• Light source Red Light LED: 525 10nm
• CPU: 32-bit
• Resolution: 640*480
• Resolution: 1D≥3mil, 2D≥8.7 mil@PCS90%
• Decoding speed: 25CM/S
• Depth of field: 10mm-500mm
• Scan mode Manual: Auto Sense
• Scan angle Roll: 360, Pitch 60, Skew 70°
• Print contrast: ≥25%
• Wireless: 2.4GHz = 150meters, Bluetooth distance 30 meters (open distance)
• Storage Battery: 16Mb capacity 2200 mAh (1200 mAH for SA1100)
• Charging time: Approx. 3 hours
• Continuous: ≥16 hours working time
• Communication USB, Wireless 2.4G, Wireless Bluetooth 4.2
• Power supply: DC 5V@200mA (work)
• Operating temp: 0° C to 50°C
• Storage: -30°C to 60°C
• Humidity Drop: 5% to 95% (non-condensing)
• Height: 1.5mCE,
• Certificate: FCC, RoHS

How to connect the scanner using a USB Wireless Dongle

2.4G Mode – laptop/computer

1. Power the scanner by pressing the button
2. Insert the USB dongle into a USB port of your device
3. Wait 30 seconds for devices to pair automatically.

For any issues connecting the scanner to the Wireless USB Dongle please follow the below troubleshooting steps:

1. Unplug USB Dongle

2. Scan the below barcode:

3. Scan the below barcode:
   Pair with dongle

4. Plug the USB Dongle back into the computer and test again. A blue light on the scanner should turn on, indicating that your scanner is connected to the dongle.

If the scanner is in Bluetooth Mode and you want to revert back to the previously connected dongle, all you need to do is scan the 2.4G Mode barcode above.

To test, open a Word document or notes and try scanning a normal barcode (not a configuration barcode from the user guide). If you have any questions about setting up or configuring the scanner please email us at helpdesk@scanavenger.com
Our helpdesk operates 24/7 – 365 days a year.

How to connect the scanner via Bluetooth to a mobile phone, tablet, or

other Bluetooth devices

Scan

Scan

The scanner light will be flashing blue. This means you can Connect it to your mobile device. On your mobile/tablet go to Bluetooth devices, search for “ScanAvenger HID”
and click PAIR.
The scanner light will turn solid blue indicating the scanner is connected to your device. Remember you can turn ON/OFF your mobile phone/tablet keyboard by double tapping the scanner button.

If the scanner is in Dongle Mode, and you want to revert to the previously connected Bluetooth device, all you need to do is scan the Bluetooth Mode barcode above.
If for whatever reason you are having Bluetooth connectivity issues, we recommend you remove the scanner from your Bluetooth devices on your mobile and go through the above steps again. For Bluetooth SPP and BLE Modes please contact us at Helpdesk.
To test, open a Word document or notes and try scanning a normal barcode (not a configuration barcode from the user
guide). If you have any questions about setting up or configuring the scanner please email us at
helpdesk@scanavenger.com
Our helpdesk operates 24/7 – 365 days a year.

Trigger Modes

There are two different trigger modes:

Sleep Time Settings

Inverse Barcodes

Inverse barcodes are barcodes that have white lines on black background. The scanner is configured by default to not read them.

Language Settings

Configuring your scanner to automatically hide characters

Note: This method can only hide up to 4 characters. Please check the extended user manual, or email us at helpdesk@scanavenger.com for more details.

Follow the steps below to configure your scanner

• 5 beeps and stops scanning (shuts down) – your to hide characters:

Chose if you want to hide from the back or front.

Chose how many characters you wish to hide (Scan only 1 barcode)

For an extended user manual or any questions, please email us at helpdesk@scanavenger.com

Storage Mode

Once your scanner has been set to Storage mode, each time you scan a barcode, it will be stored in its internal memory. To upload all the stored barcodes, simply scan the barcode below:

If you need to clear all the stored data, you simply need to scan the barcode below

If you wish to exit Storage Mode, scan the barcode below

To fully reset the scanner to factory settings, email us at helpdesk@scanavenger.com with your scanner’s model number for instructions.

Frequently Asked Questions

Q: Some barcode types are disabled by default. How can I enable them?

A: For more information on enabling specific barcode types, please refer to the Full User Manual or contact us at helpdesk@scanavenger.com.

Q: Can I use Fast Charging AC adapters to charge the scanner?

A: No, please avoid using Fast Charging AC adapters as this may shorten the lifespan of the built-in battery.

Q: What should I do if I accidentally scan configuration codes and the scanner stops working?

A: Email us at helpdesk@scanavenger.com for the full reset process.

Q: How do I know the status of the scanner based on LED lights and buzzer signals?

A: Refer to the LED Light and Buzzer Description provided in the manual for detailed information on different statuses indicated by lights and sounds.

Can it automatically open a website page, after scanning a QR Code?

The basic idea is that the scanner acts as an automatic keyboard. You have to click where you want the data to be written. Each time you scan a barcode, it will transmit the data as if you were typing on a keyboard. Your devices will recognize the scanner as a keyboard.
Please note that this will not impact your keyboard’s functionality.

When trying to scan, my scanner makes multiple beeps, without outputting anything. Why does this happen?

The number of beeps and the LED on the back of your scanner will help you identify why this is happening. The most common issues are:

1. 3 beeps and flashing LED – your scanner is not connected to your device. To fix this, please follow the Dongle/Bluetooth Pairing from this Quick User Guide.
2. 5 beeps and stops scanning (shuts down) – your scanner is out of battery. Please charge your scanner and try again.

Will ScanAvenger barcode scanners work with any Inventory Management Software?

Your ScanAvenger barcode scanner will work with most Inventory Management Software. That being said, some Inventory Management Software developers restrict what barcode scanners will work. We recommend checking their website for more information.
If you need any assistance, please do not hesitate to contact us at helpdesk@scanavenger.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>