HUMIDEX BSF-150 Dehumidifier and Air Extractor Systems Owner’s Manual

June 10, 2024
HUMIDEX

HUMIDEX BSF-150 Dehumidifier and Air Extractor Systems

HUMIDEX BSF-150 Dehumidifier and Air Extractor Systems

IMPORTANT

To properly validate your warranty, you must fill out and return the warranty card as soon as
possible. If your unit is not registered, a proof of purchase will be necessary should it require any services. You can also register your warranty online http://www.clairitech.com/register .

Consumer Limited Warranty

ClairiTech Innovations Inc. warrants to the first consumer that this product, when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for the period(s) set forth below. The defective part must be returned to the manufacturer ClairiTech Innovations Inc. All transportation charges are the sole responsibility of the purchaser.

This warranty does not apply to any appearance items of the product nor to the additional excluded item(s) set forth below of which have been damaged, defaced, subjected to improper voltage, abnormal service or handling, or which has been altered or modified in design or construction.

In order to enforce the rights under this limited warranty, the purchaser must fill out and return the warranty card as soon as possible. If your unit is not registered, a proof of purchase will be necessary should it require any services.

Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of ClairiTech Innovations Inc.

The warranties described herein shall be the sole and exclusive warranties granted by ClairiTech and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of ClairiTech to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, and strict liability or otherwise. In no event shall ClairiTech be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer, unless approved by ClairiTech in writing. Nor shall ClairiTech beliable or in any way responsible for any incidental or consequential economic or property damage.

Warranty Period for this product:| Five (5) year on parts and electrical from date of purchase, two (2) years on all electronic components
---|---
Additional Items Excluded From Warranty Coverage (If Any):| Appearance items of the product, Exterior vent and any printed material.
Where to obtain service:| From the Manufacturer. Refer to Page 2 for Contact Information

This warranty is non-transferable and applies to residential use only.
To obtain supply, accessory or product information, contact us.
Refer to Page 2 for Contact Information.

Pre-Installation

Included Components

Before installing your Humidex, make sure that you have the right model and accessories. The following items should be included in the accessory box. If parts are missing, contact our customer service at US 1-888-533-1348, Can. 1-800-416-9111.

1x Owner’s Manual 6x #8 x 9/16” Screws
1x Warranty Card 4x #8 x 2” Screws
1x Universal Boot 4x #8 x 1¼” Truss Screws
4Ft. 6” Insulated Flex 2x 4” x 12” Toe Space Grill
2x Cable Ties 4x Plastic Anchors

Additional grilles for replenishment air and interior rooms not included.

Tools Required for Installation
  • Electric reciprocal or hole saw 6¼”
  • Drill with a ¼” concrete bit
  • Phillips or Robinson Screw Driver
  • Measuring Tape
  • Hammer
  • Pencil

Installation

Key Installation Facts
  1. To minimize noise propagation, install at least 6’ of 6” insulated flex between the universal duct boot (connected to the floor register) and the BSF.
  2. To further decrease noise propagation, 6’ of insulated flex can be used on the exhaust side of the BSF. (Not Included)
  3. Install the BSF as far away as possible from the Exhaust system (Wave or Humidex). If this cannot be done, please use 6” Flex to pipe the BSF away from the exhaust system.
  4. If the building codes in your area require a backdraft damper to be installed, it must be placed on the exhaust side of the BSF to limit the impact on the total airflow thru the unit. (Not Included)
  5. This unit is typically sold with an Exhaust system (Humidex or Wave). If this is the case, then this BSF system is made to replace your Replenishment vent required by the Exhaust system.
Installation Diagram

BSF-150 and BSF-180
Installation Diagram

Installation Diagram

Unit Operations

The Controls

The BSF system is equipped with a 3 position Switch. This switch is to select the maximum amount of airflow to be brought down to your basement or crawlspace.

| BSF-150| BSF-180
---|---|---
Low (Off)| 55 CFM| 55 CFM
Med| 95 CFM| 120 CFM
High| 150 CFM| 180 CFM

Ideally, the Booster fan speed should be matched with the speed utilized on your Humidex or Wave Exhaust system.

E.g. if your Humidex or Wave Exhaust system is set to Medium, then the BSF system should also be set to medium.

Note: In Cold basements, the BSF fan speed should start at low and be incremented slowly. This will prevent any temperature shock that will also stop condensation from forming and humidity from rising.

E.g. Basement is 60 °F, start the BSF system on Low and slowly bring it up to high after a few days.

For any concerns or questions on how to set up your BSF properly, please contact our support line at 1-888-533-1348.

Specifications

Technical Data
Model Amps (A) Watts (W) Airflow (CFM)
Low Med High
BSF-150 0.26 31 55
BSF-180 0.26 31 55

All Units require a 115 VAC electrical outlet

Dimensions
Model Height (In.) Width (In.) Depth (In.)
BSF-150 11” 10.25” 7.25”
BSF-180 11” 10.25” 7.25”
Schematic of Wiring

Wiring Diagram for Model Numbers:
BSF-150
Revision 1.0

Schematic of Wiring

Wiring Diagram for Model Numbers:
BSF-180
Revision 1.0

Schematic of Wiring

Return and Exchange Policy

Clairitech Innovations Inc. values its relationship with you and offers you the option to return most products you purchase directly from Clairitech Innovations Inc., as set forth in detail below.

Policy

Return period of 30 days for unused products and accessories:

Unless you have a separate agreement with Clairitech Innovations Inc., or subject to the provisions below, all equipment and accessories that have not been used, in new condition and in their original packaging may be returned to Clairitech Innovations Inc. within 30 days of the date of purchase for a refund of their purchase price, an equivalent credit note or the exchange of the product, less shipping and handling charges, resupply fee and applicable taxes, if already paid.

Return period of 15 days for defective or damaged products and accessories:

Requests for refund and/or exchange for defective or damaged merchandise can be made within 15 days of receipt of the merchandise. After 15 days, the manufacturer’s warranty applies.
Note: Any product returned to Clairitech Innovations Inc. without the prior permission of Clairitech Innovations Inc. will be considered an unauthorized return; the customer will not receive any refunds or credit notes for the product and Clairitech Innovations Inc. will not return the product to the customer.

Damaged products and accessories:

If you have received damaged items, please contact us by phone or email before destroying or discarding the product and/or packaging. Failure to comply could see your request denied.

Fees

Unless the product is defective or the return is a direct result of a Clairitech Innovations Inc., the refund or credit does not include any shipping and handling charges shown on your packing slip or invoice; you are responsible for those and for any damages incurred during the return shipment.

Procedure
  1. Before returning a product, you must first obtain a Return Authorization Number from Clairitech Innovations Inc. Customer Service before the end of the applicable return period. Proof of purchase will also be required.
    To contact Clairitech Innovations Inc. Customer Service, please call 1-888-533-1348 or Email Us Any product returned to Clairitech Innovations Inc. without the prior approval of Clairitech Innovations Inc. will be considered an unauthorized return; the customer will not receive any credit or refund for the product and Clairitech Innovations Inc. will not return the product to the customer.

  2. Pack the product in its original package

  3. Insert all the documents received concerning the order to be returned. Remember to keep a copy of all the documents provided.

  4. To obtain a full refund, the products must be returned in perfect condition, in their original packaging and with all documents, parts and accessories.

  5. The return costs must be prepaid; we will not accept deliveries paid at the reception.

  6. For your protection, we advise you to provide the shipping service

  7. Five days after the date of issue of the return authorization number Clairitech Innovations Inc. Customer Service, you must send the product to the following address:
    ClairiTech Innovations Inc.
    1095 ch. Ohio Service Rd
    Boudreau Ouest, New Brunswick
    E4P 6N4 – Canada 

  8. Upon receipt of your authorized and compliant return, Clairitech Innovations Inc will issue a credit or refund equal to the purchase price paid, less shipping and handling charges, restocking charges and applicable taxes subject to this policy.

  9. For assistance please call 1-888-533-1348 or Email Us

  10. For any questions regarding warranty terms please call 1-888-533-1348 or Email Us
    NO RETURNS ARE POSSIBLE AFTER 30 DAYS FOLLOWING THE DATE OF THE BILLING DATE. CLAIRITECH INNOVATIONS SHALL NOT BE LIABLE FOR, OR ANY CHARGE OF, A CONSUMER ORDER ERROR.

Service and Warranty

For Customer Assistance

To aid in answering questions if you call for service or warranty purposes, please record below the model and serial number located on the side of the unit.

Product Name:
Model #:
Date of Manufacturing:
Date of Purchase:
Serial #:
Dealer Name (If Any):

For the Following Inquiries:

  • Service
  • Parts
  • Accessories
  • Additional Customer Information

Please contact us by:
Phone: 1-888-533-1348
Email: support@clairitech.com
Website: www.humidex.com

Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals