ScanAvenger SA1100 Series Wireless Barcode Scanner User Guide
- June 14, 2024
- ScanAvenger
Table of Contents
ScanAvenger SA1100 Series Wireless Barcode Scanner User Guide
Frequently Asked Questions
-
Can it automatically open a website page, after scanning a QR Code?
The basic idea is that the scanner acts as an automatic keyboard. You have to click where you want the data to be written.
Each time you scan a barcode, it will transmit the data as if you would be typing on a keyboard. Your devices will recognize the scanner as a keyboard. Please note that this will not impact your keyboards functionality. -
When trying to scan, my scanner makes multiples beeps, without outputting anything.
Why does this happen? The number of beeps and the LED on the back of your scanner will help you identify why this is happening. The most common issues being: – 3 beeps and flashing LED:
This means that your scanned is not connected to your device. To fix this, please follow the Dongle/Bluetooth Pairing from this Quick User Guide. – 5 beeps and stops scanning (shuts down): This means that your scanner is out of battery. Please charge your scanner and try again. -
Will Scan Avenger barcode scanners work with any Inventory Management Software?
Your Scan Avenger barcode scanner will work with most Inventory Management Software. That being said, some Inventory Management Software developers restrict what barcode scanners will work. We recommend checking their website for more information. If you’re unsure, do not hesitate to reach out to us.
Store mode
Once your scanner had been set to Store mode, each time you scan a barcode, it will be stored in its internal memory. To upload all the stored barcodes, simply scan the barcode below
f you need to clear all the stored data, you simply need to scan the barcode below:
If you wish to exit Store Mode, scan the barcode below
Step 2: Chose how many characters you wish to hide (Scan only 1 barcode)
Hide 3 bits
For an extended user manual or any questions, please email us at helpdesk@scanavenger.com
German:
Configuring your scanner to automatically hide characters
Note:
This method can only hide up to 4 characters. Please check the extended user
manual, or email us at
helpdesk@scanavenger.com for more details.
Follow the steps below to configure your scanner to hide characters:
Step 1 : Chose if you want to hide from the back or front.
Hide Front of Barcode digits (read same barcode to revert to normal)
Hide Back of Barcode digits (read same barcode to revert to normal)
Inverse Barcodes
Inverse barcodes are barcodes that have white lines on black background. The
scanner is configured by default to not read.
To enable, scan the barcode below:
Language settings:
English (default)
SOUND SETTINGS
Trigger Modes
There are two different trigger modes:
-
Manual Trigger
-
Sense Mode
SLEEP TIME SETTINGS
5 minutes
30 minutes
How to connect your scanner via Bluetooth to a mobile phone, tablet or other Bluetooth devices
-
Scan:
Bluetooth Mode -
Scan:
Pair with Bluetooth -
Scanner light will be flashing blue. This means you can Connect it to your mobile device. On your mobile/tablet go to Bluetooth devices, search for “ScanAvenger HID” and click PAIR
-
Scanner light will turn solid blue indicating the scanner is connected to your device. Remember you can turn ON/OFF your mobile phone/tablet keyboard by double tapping the scanner button
- If scanner is in Dongle Mode and you want to revert back to previously connected Bluetooth device, all you need to do is scan the Bluetooth Mode barcode above.
** If for whatever reason you are having Bluetooth connectivity issues, we recommend you remove the scanner from your Bluetooth devices on your mobile and go through the above steps again. For Bluetooth SPP and BLE Modes please contact us at Helpdesk
To test, open a word document or notes and try scanning a normal barcode (not a configuration barcode from the user guide). If you have any questions about setting up or configuring the scanner please email us at
helpdesk@scanavenger.com
Our helpdesk operates 24/7 – 365 days a year.
How to connect your scanner using USB Wireless Dongle:
G Mode – laptop/computer
- Power the scanner by pressing the button
- Insert the USB dongle in the USB port of your device
- Wait 30 seconds for devices to pair automatically
For any issues connecting the scanner to the Wireless USB Dongle please follow the below troubleshooting steps:
-
Unplug USB Dongle
-
Scan Below Barcode:
-
Scan below barcode:
-
Plug the USB Dongle back into the computer and test again. Blue light on the scanner should be turned on, indicating that your scanner is connected to the dongle.” * If scanner is in Bluetooth Mode and you want to revert back to previously connected dongle, all you need to do is scan the 2.4G Mode barcode above
To test, open a word document or notes and try scanning a normal barcode (not a configuration barcode from the user guide).
If you have any questions about setting up or configuring the scanner please email us at
helpdesk@scanavenger.com .
Our helpdesk operates 24/7 – 365 days a year.
Scanner type: CMOS
Light source: Red Light LED 525 ±10nm
CPU: 32-bit
Resolution: 640*480
Resolution: 1D≥3mil, 2D≥8.7mil@PCS90%
Decoding speed: 25CM/S
Depth of field: 10mm-500mm
Scan mode: Manual, Auto Sense
Scan angle: Roll ±360˚, Pitch ±60˚, Skew ±70˚
Print contrast: ≥25%
Wireless: 2.4GHz = 150meters, Bluetooth
distance: 30meters (open distance)
Storage: 16Mb
Battery capacity: 2200 mAh (1200 mAH for SA1100)
Charging time: Approx. 3 hours
Continuous: ≥16 hours
working time:
Communication: USB, Wireless 2.4G, Wireless Bluetooth 4.2
Power supply: DC 5V@200mA (work)
Operating temp: 0˚ C to 50˚C
Storage: -30˚C to 60˚C
Humidity: 5% to 95% (non-condensing)
Drop Height: 1.5mCE,
Certificate: FCC, RoHS
Led & Buzzer
LED Light: Description
Blue LED ON: Scanner ON and connected
Red LED ON: Charging
No light ON: Scanner not connected to any device
Buzzer: Description
A long beep: Power ON/OFF
A short beep
(low frequency) : Scan common barcode, paired, or wireless connection
success
short beeps
(low frequency): Battery without electricity
and stop scanning
short beeps
(low frequency): Wireless disconnection
Mini Scanner LED Light Smart Light Signaling
- Small and Medium light turn on when scanner is on
- Large light turns on when the scanner is connected.
- Medium light flashes once when successfully reading a barcode.
In order to correctly use the barcode scanner, please read the instructions carefully. It is advised to keep this manual for future reference. No part of this publication may be reproduced or distributed in any form without written permission from ScanAvenger.
ScanAvenger reserves the right to make the final interpretation of the above statement. If you come across any issues with your product, please contact us via email at helpdesk@scanavenger.com
When contacting our helpdesk please make sure you mention your order number and scanner mode
Touble shooting your scanner
Important :
Some barcode types are disabled in the default configuration. Check the user
manual for further information or email at
helpdesk@scanavenger.com for more
information.
Led & Buzzer
LED Light: Description
Blue LED ON: Scanner ON and connected
Red LED ON: Charging
No light ON: Scanner not connected to any device
Buzzer: Description
A long beep: Power ON/OFF
A short beep
(low frequency): Scan common barcode, paired, or wireless connection
success
5 short beeps
(low frequency): and stop scanning
3 short beeps
(low frequency): Wireless disconnection
If at any stage you accidentally scan configuration codes and the scanner stops working, please email us at helpdesk@scanavenger.com for the full reset process.
For an extended user manual or any questions please email us at helpdesk@scanavenger.com.